Accretion of Phantom Energy by Bardeen Black Hole

In this paper we deal with the accretion of phantom energy onto static spherically symmetric Bardeen black hole. It is shown that the mass of black hole reduces with the accretion of phantom energy. We compute accretion rate onto Bardeen black hole at critical point. Furthermore, we obtain the conditions at critical point, under which accretion is possible and also discuss certain relevant cases. Finally, we discuss the validity of generalized second law of thermodynamics at the event horizon of Bardeen black hole.     

PREDICTION OF OIL SATURATION IN A FIBROUS BED COALESCER FROM PRESSURE DROP DATA

A model has been formulated for the prediction of average saturation and the saturation profile through a fibrous bed during coalescence of secondary dispersion. The approach utilizes the Blake-Kozeny equation to relate experimental pressure drop data to saturation in the bed. Reasonable agreement was obtained between predicted saturations and those measured experimentally. The predicted saturation profiles could be used to determine other coalescer design parameters.     

Ammonium Chloride–Catalyzed One-Pot Synthesis of Tetrahydrobenzo[α]xanthen-11-one Derivatives Under Solvent-Free Conditions

A one-pot, multicomponent reaction of aldehydes, dimedone, and β-naphthols is described for the preparation of 12-aryl- or 12-alkyl-8,9,10,12-tetrahydrobenzo[α]xanthen-11-one derivatives using ammonium chloride as a mild, inexpensive, and environmentally benign catalyst under solvent-free conditions. Different types of aldehyde and β-naphthol derivatives are used in the reaction, and in all cases the products were synthesized successfully.

Natural eutectic salts catalyzed one-pot synthesis of 5-arylidene-2-imino-4-thiazolidinones

The rapid, very simple and green one-pot synthesis of 5-arylidene-2-imino-4-thiazolidinones by condensation of the thioureas with chloroacetyl chloride and an aldehyde in natural deep eutectic solvent with good to excellent yields is described.     

Phase-Transfer-Catalyzed Michaelis-Becker Synthesis of Dialkyl Methyl Phosphonates

A liquid–liquid phase-transfer-catalyzed (PTC) Michaelis-Becker reaction was adopted in the preparation of dialkyl methyl phosphonate (R = Me, iPr, nBu, and iBu). This was performed by the reaction of an appropriate dialkyl hydrogen phosphonate with methyl iodide in the presence of benzyl triethyl ammonium chloride and sodium hydroxide as PTC and base, respectively. A liquid–liquid two-phase system (H₂O/CH₂Cl₂) introduced a suitable situation for the preparation of dialkyl methyl phosphonates with bulky alkyl groups (R = iPr, nBu, and iBu), but with R = Me, the hydrolysis of dimethyl hydrogen phosphonate (reagent) reduced the yield to 22%. In this case, a solid–liquid PTC-free system was successfully applied and yield of over 80% was obtained.     

Effect of mass transfer limitations on catalyst performance during reduction and carburization of iron based Fischer-Tropsch synthesis catalysts

Existence of intraparticle mass transfer limitations under typical Fischer-Tropsch synthesis has been reported previously,but there is no suitable study on the existence of intraparticle diffusion limitations under pretreatment steps (reduction and activation) and their effect on catalytic performance for iron based catalysts.In this study,Fe-Cu-La-SiO2 catalysts were prepared by co-precipitation method.To investigate the intraparticle mass transfer limitation under reduction,activation and reaction steps,and its effect on catalytic performance,catalyst pellets with different sizes of 6,3,1 and 0.5 mm have been prepared.All catalysts were calcined,pretreated and tested under similar conditions.The catalysts were activated in hydrogen (5%H2in N2) at 450℃ for 3 h and exposed to syngas (H2/CO=1) at 270℃ and atmospheric pressure for 40 h.Afterwards,FTS reaction tests were performed for approximately 120 h to reach steady state conditions at 290℃,17 bar and a feed flow (syngas H2/CO=1) rate of 3 L/h (STP).Using small pellets resulted in higher CO conversion,FT reaction rate and C5+ productivity as compared with larger pellets.The small pellets reached steady state conditions just 20 h after starting the reaction.Whereas for larger pellets,CO conversion,FT reaction rate and C5+ productivity increased gradually,and reached steady state and maximum values after 120 h of operation.The results illustrate that mass transfer limitations exist not only for FTS reaction but also for the reduction and carburization steps which lead to various phase formation through catalyst activation.Also the results indicate that some effects of mass transfer limitations in activation step,can be compensated in the reaction step.The results can be used for better design of iron based catalyst to improve the process economy.     

Magnetic Nanoparticles Supported Ionic Liquids Improve Firefly Luciferase Properties

Ionic liquids as neoteric solvents, microwave irradiation, and alternative energy source are becoming as a solvent for many enzymatic reactions. We recently showed that the incubation of firefly luciferase from Photinus pyralis with various ionic liquids increased the activity and stability of luciferase. Magnetic nanoparticles supported ionic liquids have been obtained by covalent bonding of ionic liquids-silane on magnetic silica nanoparticles. In the present study, the effects of [γ-Fe₂O₃@SiO₂][BMImCl] and [γ-Fe₂O₃@SiO₂][BMImI] were investigated on the structural properties and function of luciferase using circular dichroism, fluorescence spectroscopy, and bioluminescence assay. Enzyme activity and structural stability increased in the presence of magnetic nanoparticles supported ionic liquids. Furthermore, the effect of ingredients which were used was not considerable on K _m value of luciferase for adenosine-5′-triphosphate and also K _m value for luciferin.     

CWDM source based on AlGaInAs/InP monolithically integrated DFB laser array

The monolithic integration of four 1.5?μm range AlGaInAs/InP distributed feedback lasers with a 4×1 multimode-interference optical combiner, a curved semiconductor optical amplifier, and an electro-absorption modulator using relatively simple technologies--sidewall grating and quantum well intermixing--has been demonstrated. The four channels span the wavelength range of 1530 to 1566?nm with a channel spacing of 12?nm. The epitaxial structure was designed to produce a far-field pattern as small as 21.2°×25.1°, producing a coupling efficiency with an angled-end single-mode fiber at twice that of a conventional device design.     

Graphene and Graphene/Polymer Composites as the Most Efficient Protective Coatings for Steel,Aluminum and Copper in Corrosive Media: A Review of Recent Studies

The metal corrosion is considered as a severe threat to the national economy and industry structure, capable of triggering significant economic losses and severe damages, involving innumerable fields in daily life and industries. This review provides an overview of the physioelectrochemical studies on anticorrosive properties of various types of graphene coatings. Required electrochemical techniques for the investigation of anticorrosive efficiency, various types of graphene‐based materials coatings along with different routes to provide desirable coated layers are discussed in detail. After all, we intend to show that the modified graphene nanosheets can be regarded as effective protective layers against metal corrosion not only because of their extraordinary mechanical strength and toughness, which can be reached with a vastly thin layer, but also for their high transparency, cost‐efficiency and stability.