Michael addition reactions of acetoacetates and malonates with acrylates in water under strongly alkaline conditions

Michael addition reactions of acetoacetates and malonates with acrylates in a 5 M KOH aqueous solution without using any other catalysts are described. When they are either tert-butyl or benzyl esters, the reaction proceeded very rapidly to afford moderate to high yields of the corresponding bis-Michael adducts that are unexpectedly stable under these conditions.     

Electron beam treatment of lignite-burning flue gas with high concentrations of sulfur dioxide and water

Experiments were carried out to investigate the removals of SO₂ and NO_x from simulated lignite-burning flue gas containing SO₂ (4800 ppm), NO (320 ppm) and H₂O (22%) by electron beam irradiation. Removal efficiencies of SO₂ and NO_x were achieved to reach 97 and 88% at 70°C, and 74 and 85% at 80°C, respectively, with the dose of 10.3 kGy without NH₃ leakage. The higher removal efficiencies of SO₂ and NO_x were observed in simulated lignite-burning flue gas than in coal-fired flue gas containing 800 ppm of SO₂, 225 ppm of NO and 7.5% H₂O at the same treatment condition. The higher removal efficiencies were attributed to the higher concentrations of SO₂, H₂O, and added NH₃. Simulation calculations indicated that the higher concentrations of these components enhance the effective radical reactions to oxidize NO to form NO₂ with HO₂ radical, and to oxidize SO₂ to form SO₃ with OH radical and O₂. The reactions of NO_x with N and NH₂ radicals to produce N₂ and N₂O also promote the NO_x removal. By-product was determined to be the mixture of (NH₄)₂SO₄ and NH₄NO₃ containing a small amount of H₂SO₄.     

Synthesis of Methyl 6′-Deoxy- and 6′-Thiolactosaminides and Their Inhibitory Activity Toward CMP-NeuNAc:D-galactoside-(2→6)-α-D-sialyltransferase

Abstract

Specific inhibitors of glycosyltransferases have become of interest1 not only for investigation of carbohydrate-participating cell-surface phenomena but also for practical use such as chemotherapeutic reagents. Glycosyltransferases catalyze the transfer of glycosyl moieties from nucleotide donors to oligosaccharide acceptors. Therefore, two kinds of substrate-analog inhibitors are possible. The donor analogs have been rather well studied, but are not specific. On the other hand, glycosyltransferases have in general smct acceptor specifkity. Recently, acceptor analogs which inhibit the corresponding glycosyltransferases were reported^2-5 and as expected were acceptor-specific inhibitors.     

Discovery of Oxysterol-Derived Pharmacological Chaperones for NPC1: Implication for the Existence of Second Sterol-Binding Site

1. Download : Download high-res image (181KB)
2. Download : Download full-size image

Highlights? Niemann-Pick disease type C is caused by folding defect in NPC1 protein ? Oxysterols and chemically optimized derivatives act as pharmacological chaperones ? Defects in localization, stability, maturation, and function were corrected in cell ? These derivatives bind to second sterol-binding site on NPC1 protein     

Vacuum‐driven fluid manipulation by a piezoelectric diaphragm micropump for microfluidic droplet generation with a rapid system response time

Recently, we developed a convenient microfluidic droplet generation device based on vacuum‐driven fluid manipulation with a piezoelectric diaphragm micropump. In the present study built on our previous work, we investigate the influence of settings applied to the piezoelectric pump, such as peak‐to‐peak drive voltage (V_p‐p) and wave frequency, on droplet generation characteristics. Stepwise adjustments to the drive voltage in ±10‐V_p‐p increments over the range of 200?250 V_p‐p during droplet creation revealed that the droplet generation rate could be reproducibly controlled at a specific drive voltage. The droplet generation rate switched within <0.5 s after the input of a new voltage. Although the droplet generation rate depended on the drive voltage, this setting had almost no influence on droplet size. The frequency over the selected range (50?60 Hz) did not markedly influence the droplet generation rate or droplet size. We show that the current fluid manipulation system can be conveniently used for both droplet generation and for rapid droplet reading, which is required in many microfluidic‐based applications.     

Photoinduced depolymerization of poly(olefin sulfone)s possessing photobase generator side‐chains: Effect of spacer‐chain length

Photoinduced depolymerization of poly(olefin sulfone)s possessing photobase generators in the side‐chain was investigated. Irradiation with UV light generated base on the side‐chains and induced depolymerization based on proton abstraction on the main‐chain. The effect of the length of the spacer chain, which connects the photobase‐generating moiety to the polymer main chain on the photoinduced depolymerization, also was investigated. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3873–3880     

Synthesis and Properties of Phosphorus-Containing Aromatic Polyethers

The phosphorus-containing aromatic polyethers were prepared from bis(p-chlorophenyl)phenylphosphine oxide (BCPO) with the sodium salt of several bisphenols by high temperature solution polycondensation. The best result (yield 84%, n _sp /c = 0.15) was obtained from BCPO with bisphenol A (BPA) in dimethyl sulfoxide. However, the polymerization in the solvents such as N, N′-dimethyl-2-pyrrolidone, hexamethylphosphoramide, and N,N′-dimethylformamide, and the polymerization with the other bisphenols HO-C₆H₄-X-C₆H₄?OH, where X = CO, S0₂, CH₃P(O), C₆H₅P(O) in place of BPA gave gumlike polymers. The polymer prepared from BCPO and BPA did not decompose up to ca. 300°C under air or nitrogen atmosphere, but it decomposed slowly at 300–520°C, and decomposed rapidly at 520–540°C. The activation energy (δE) for the maximum rate of weight loss was 47.8 kcal/mole.     

Invited Lecture. Ferroelectric liquid crystalline polymers and related model compounds with a low–moderate degree of polymerization

Abstract

Ferroelectric liquid crystalline polymers (FLCPs) with a low-moderate degree of polymerization were synthesized. These had a comb structure; the main chain was polyacrylate and the side chain consisted of a flexible spacer, a core and an optically active chiral end group. They exhibited electro-optic switching times ranging from a few milliseconds to a few seconds in the S*_c phase. As the molecular weight M _n increased, the range of the S*_c shifted to higher temperatures. At a given temperature, the switching time increased with M _n .

Spontaneous polarizations P _s , apparent cone angles 2θ, electro-optic switching times τ and rotational viscosities η of some polyoxyethylene FLCPs and corresponding low molecular weight ferroelectric liquid crystal materials (FLCs) were also measured. This is the first report of polyoxyethylene FLCPs. There was no significant difference in P _s and 2θ, which shows that the arrangement of the side chains in the FLCP is similar to that of the molecules in ordinary FLC. On the contrary, τ and η for the FLCPs were 10²–10³ times as large as those for FLCs. The rotational viscosity of the FLCP was mainly dependent on the side chain structure rather than on the spacer. Therefore collisions between adjacent side chains cause large η values in FLCPs rather than hindrance to side chain gyration due to the spacer group. By combining FLCPs with ITO-coated plastic substrates, a large area matrix driven display has been made. Although an improvement in switching time is still needed, a flexible and lightweight display like a sheet of paper will be available in the near future.     

Synthesis of new hydrolyzable polyurethanes from L‐gulonic acid‐derived diols and diisocyanates

New polyurethanes with lactone groups in the pendants and main chains were synthesized by the polyaddition of two kinds of L ‐gulonolactone‐derived diols (2,3‐O‐isopropylidene‐L ‐gulono‐1,4‐lactone and 5,6‐O‐isopropylidene‐L ‐gulono‐1,4‐lactone) with hexamethylene diisocyanate and methyl (S)‐2,6‐diisocyanatohexanoate and by the subsequent deprotection of isopropylidene groups. They were hydrolyzed more quickly than the polyurethane derived from methyl β‐D ‐glucofuranosidurono‐6,3‐lactone in a phosphate buffer solution, the pH value of which was 8.0, at 27 °C. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4158–4166, 2002