Shimalactone Biosynthesis Involves Spontaneous Double Bicyclo-Ring Formation with 8π-6π Electrocyclization

Shimalactones A and B are neuritogenic polyketides possessing characteristic oxabicyclo[2.2.1]heptane and bicyclo[4.2.0]octadiene ring systems that are produced by the marine fungus Emericella variecolor GF10. We identified a candidate biosynthetic gene cluster and conducted heterologous expression analysis. Expression of ShmA polyketide synthase in Aspergillus oryzae resulted in the production of preshimalactone. Aspergillus oryzae and Saccharomyces cerevisiae transformants expressing ShmA and ShmB produced shimalactones A and B, thus suggesting that the double bicyclo-ring formation reactions proceed non-enzymatically from preshimalactone epoxide. DFT calculations strongly support the idea that oxabicyclo-ring formation and 8π-6π electrocyclization proceed spontaneously after opening of the preshimalactone epoxide ring through protonation. We confirmed the formation of preshimalactone epoxide in vitro, followed by its non-enzymatic conversion to shimalactones in the dark.     

Interaction of highly charged ions with carbon-based materials using Kobe EBIS

Interaction of highly charged ions (HCIs) with surfaces produce various specific phenomena as a consequence of the potential energy that HCI possesses. In the present study, we have observed photon emission, structural, magnetic, and electronic modification on various carbon-based materials such as carbon nanotube by the impact of HCIs using an electron beam ion source named Kobe EBIS installed at the Kobe University. In order to study the potential effect, HCIs of Ar^q+ (q = 6–16) with the intensity of 0.1–1 nA are projected on the surface with a constant kinetic energy (16 keV). For photon emission measurements, we observed spatial and spectral distribution of visible light emission from the surface during irradiation with HCIs. On the other hand, the structural modification of multi-walled carbon nanotubes (MWCNTs) irradiated with HCIs has been analyzed using a transmission electron microscopy and Raman spectroscopy. Irradiation effects on the resistivity of single MWCNT supported on micrometer scale bridge pattern were also measured. We have also measured magnetic structure of highly oriented pyrolytic graphite irradiated with HCIs using electron spin resonance at low temperature. At the present paper, we will review our recent experimental results on the interaction of HCI with various carbon-based materials.     

In Vitro Analyses of Spinach-Derived Opioid Peptides,Rubiscolins: Receptor Selectivity and Intracellular Activities through G Protein- and β-Arrestin-Mediated Pathways

Activated opioid receptors transmit internal signals through two major pathways: the G-protein-mediated pathway, which exerts analgesia, and the β-arrestin-mediated pathway, which leads to unfavorable side effects. Hence, G-protein-biased opioid agonists are preferable as opioid analgesics. Rubiscolins, the spinach-derived naturally occurring opioid peptides, are selective δ opioid receptor agonists, and their p.o. administration exhibits antinociceptive effects. Although the potency and effect of rubiscolins as G-protein-biased molecules are partially confirmed, their in vitro profiles remain unclear. We, therefore, evaluated the properties of rubiscolins, in detail, through several analyses, including the CellKey^TM assay, cADDis^® cAMP assay, and PathHunter^® β-arrestin recruitment assay, using cells stably expressing µ, δ, κ, or µ/δ heteromer opioid receptors. In the CellKey^TM assay, rubiscolins showed selective agonistic effects for δ opioid receptor and little agonistic or antagonistic effects for µ and κ opioid receptors. Furthermore, rubiscolins were found to be G-protein-biased δ opioid receptor agonists based on the results obtained in cADDis^® cAMP and PathHunter^® β-arrestin recruitment assays. Finally, we found, for the first time, that they are also partially agonistic for the µ/δ dimers. In conclusion, rubiscolins could serve as attractive seeds, as δ opioid receptor-specific agonists, for the development of novel opioid analgesics with reduced side effects.     

From formal standards to everyday practice of mathematics learning

This paper uses the example of six Japanese teachers and their mathematics lessons to illustrate how clear, high standards for mathematics instruction are combined with teachers' holistic concern for students. We draw upon data from the Third International Math and Science Study Case Study Project in Japan that was designed to elucidate the context behind the high achievement of Japanese students. Using everyday examples of classroom practice, we illustrate both flexibility in teachers' approach to teaching and adherence to Monbusho's (Ministry of Education, Science, Sports, and Culture)Course of Study. Our purpose is to emphasize how flexibility and attention to individual needs by Japanese teachers combine with quality mathematics instruction based on the detailed Japanese curricula. Six teachers' characteristics and lessons (two teachers at each educational level—elementary, junior high, and high school) are described in order to show the variety of teachers who exist in Japan. These teachers use their understanding of theCourse of Study and are supported by their school environment to enhance their students' conceptual understanding of the fundamentals of mathematics. Characteristics of their teaching include: 1) involving the whole class in learning. 2) using extremely focused curriculum guidelines that expect mastery of concepts at each grade level, 3) thoroughly covering mathematics units in an organized and in-depth manner, 4) leading classes as facilitators or guides more often than as lecturers, and 5) focusing on problem solving with the primary goal of developing students' ability to reason, especially to reason inductively. The examples in this paper show how these methods develop in individal classrooms.     

High-speed etching of hexagonal GaN by laser ablation and successive chemical treatment

Photostimulated direct etching of GaN has been demonstrated with extremely high etching rate up to 135 nm/pulse. The process consists of laser irradiation and ex-situhydrochloric acid treatment. Not only deep etching but also a highly planarized surface are obtained by an increase in laser fluence and the number of pulses. Seven-pulse irradiation at 1 J/cm² decreases surface average roughness (R_a) to ~2 nm from ~10 nm of the untreated sample. No deep-level emission (450-600 nm) is detected in photoluminescence measurement on the samples irradiated with laser fluences as high as 3 J/cm².     

Synthesis and properties of polyimide-clay hybrid films

Polyimide-clay hybrid films with four different sizes of clay minerals have been synthesized to investigate the effect of the size of clay minerals to the properties of the hybrids. Hectrite, saponite, montmorillonite, and synthetic mica were used as clay minerals. Those clays consist of stacked silicate sheets about 460 Å (hectrite), 1650 Å (saponite), 2180 Å (montmorillonite), and 12300 Å (synthetic mica) in length, 10 Å in thickness. The longer the length of clay mineral was, the more effectively properties of polyimide were improved. In the case of polyimide-mica hybrid, only 2 wt % addition of synthetic mica brought permeability coefficients of water vapor to value less than one-tenth of that of ordinary unfilled polyimide, and thermal expansion coefficient was lowered at the level of 60% of the original one. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2289–2294, 1997     

Sequential reaction intermediates in aliphatic C-H bond functionalization initiated by a bis(mu-oxo)dinickel(III) complex

The reaction of [Ni2(OH)2(Me2-tpa)2]2+ (1) (Me2-tpa = bis(6-methyl-2-pyridylmethyl)(2-pyridylmethyl)amine) with H2O2 causes oxidation of a methylene group on the Me2-tpa ligand to give an N-dealkylated ligand and oxidation of a methyl group to afford a ligand-based carboxylate and an alkoxide as the final oxidation products. A series of sequential reaction intermediates produced in the oxidation pathways, a bis(mu-oxo)dinickel(III) ([Ni2(O)2(Me2-tpa)2]2+ (2)), a bis(mu-superoxo)dinickel(II) ([Ni2(O2)2(Me2-tpa)2]2+ (3)), a (mu-hydroxo)(mu-alkylperoxo)dinickel(II) ([Ni2(OH)(Me2-tpa)(Me-tpa-CH2OO)]2+ (4)), and a bis(mu-alkylperoxo)dinickel(II) ([Ni2(Me-tpa-CH2OO)2]2+ (5)), was isolated and characterized by various physicochemical measurements including X-ray crystallography, and their oxidation pathways were investigated. Reaction of 1 with H2O2 in methanol at -40 degrees C generates 2, which is extremely reactive with H2O2, producing 3. Complex 2 was isolated only from disproportionation of the superoxo ligands in 3 in the absence of H2O2 at -40 degrees C. Thermal decomposition of 2 under N2 generated an N-dealkylated ligand Me-dpa ((6-methyl-2-pyridylmethyl)(2-pyridylmethyl)amine) and a ligand-coupling dimer (Me-tpa-CH2)2. The formation of (Me-tpa-CH2)2 suggests that a ligand-based radical Me-tpa-CH2* is generated as a reaction intermediate, probably produced by H-atom abstraction by the oxo group. An isotope-labeling experiment revealed that intramolecular coupling occurs for the formation of the coupling dimer. The results indicate that the rebound of oxygen to Me-tpa-CH2* is slower than that observed for various high-valence bis(mu-oxo)dimetal complexes. In contrast, the decomposition of 2 and 3 in the presence of O2 gave carboxylate and alkoxide ligands, respectively (Me-tpa-COO- and Me-tpa-CH2O-), instead of (Me-tpa-CH2)2, indicating that the reaction of Me-tpa-CH2* with O2 is faster than the coupling of Me-tpa-CH2* to generate ligand-based peroxyl radical Me-tpa-CH2OO*. Although there is a possibility that the Me-tpa-CH2OO* species could undergo various reactions, one of the possible reactive intermediates, 4, was isolated from the decomposition of 3 under O2 at -20 degrees C. The alkylperoxo ligands in 4 and 5 can be converted to a ligand-based aldehyde by either homolysis or heterolysis of the O-O bond, and disproportionation of the aldehyde gives a carboxylate and an alkoxide via the Cannizzaro reaction.     

Desulfurization of N,N-dimethylthioformamide by hydrosilane with the help of an iron complex. Isolation and characterization of an iron-carbene complex as an intermediate of C=double bond cleavage

Desulfurization of N,N-dimethylthioformamide (Me(2)NCHS) by hydrosilane has been achieved under photo irradiation in the presence of a methyl iron complex. The reaction sequences have been proposed, in which silyl migration from Fe to S of thioformamide triggers the cleavage of a C=S bond to give a carbene-iron complex. This intermediate was isolated and characterized by X-ray analysis.     

Influence of laser fluence and irradiation timing of F2 laser on ablation properties of fused silica in F2-KrF excimer laser multi-wavelength excitation process

A collinear irradiation system of F₂ and KrF excimer lasers for high-quality and high-efficiency ablation of hard materials by the F₂ and KrF excimer lasers’ multi-wavelength excitation process has been developed. This system achieves well-defined micropatterning of fused silica with little thermal influence and little debris deposition. In addition, the dependence of ablation rate on various conditions such as laser fluence, irradiation timing of each laser beam, and pulse number is examined to investigate the role of the F₂ laser in this process. The multi-wavelength excitation effect is strongly affected by the irradiation timing, and an extremely high ablation rate of over 30 nm/pulse is obtained between -10 ns and 10 ns of the delay time of F₂ laser irradiation. The KrF excimer laser ablation threshold decreases and its effective absorption coefficient increases with increasing F₂ laser fluence. Moreover, the ablation rate shows a linear increase with the logarithm of KrF excimer laser fluence when the F₂ laser is simultaneously irradiated, while single KrF excimer laser ablation shows a nonlinear increase. The ablation mechanism is discussed based on these results. Received: 16 July 2001 / Accepted: 27 July 2001 / Published online: 2 October 2001     

The charge‐transfer complex trans‐STB–TCNQF4

In the crystal structure of the title charge‐transfer complex, namely trans‐stilbene–2,2′‐(2,3,5,6‐tetra­fluoro­benzene‐1,4‐diyl­idene)­propane­di­nitrile (1/1) (trans‐STB–TCNQF₄), C₁₄H₁₂·C₁₂F₄N₄, the planar STB and TCNQF₄ mol­ecules are stacked alternately. The structure is not isostructural with that of STB–TCNQ. No anomaly was found in the displacement parameters of any atoms, while the bond length of the central C=C moiety was shorter than the corresponding bond in ethyl­ene. This suggests that the central C=C moiety of the STB mol­ecule vibrates with a large amplitude, similar to the case in free STB and STB–TCNQ.