Development of high-radiation-sensitive polymer gel for magnetic resonance imaging in three-dimensional dosimetry

We developed a high radiation sensitive polymer gel by modifying the amounts of the gel components and the temperature for the gel preparation. We evaluated its relaxation time linearity against dose and compared the measured dose distribution with the calculated one. For the relaxation time-dose linearity, irradiations were carried out with a linear accelerator using 6 MV photons and doses ranging from 0-5.0 Gy. The relationship between dose and R(2) value (reciprocal of T(2) relaxation time) was measured and it had good linearity over a wide range (0.3-5 Gy). The measured dose distributions were in good agreement with calculated ones. Since the present gel has higher sensitivity and it is synthesized more easily at lower cost than conventional polymer gels, we expect to see improved three-dimensional (3D) dosimetry using it.     

Combustion mechanism of ultralean rotating counterflow twin premixed flame

In our previous numerical studies [Nishioka Makihito, Zhenyu Shen, and Akane Uemichi. “Ultra-lean combustion through the backflow of burned gas in rotating counterflow twin premixed flames.” Combustion and Flame 158.11 (2011): 2188–2198. Uemichi Akane, and Makihito Nishioka. “Numerical study on ultra-lean rotating counterflow twin premixed flame of hydrogen–air.” Proceedings of the Combustion Institute 34.1 (2013): 1135–1142]. we found that methane– and hydrogen–air rotating counterflow twin flames (RCTF) can achieve ultralean combustion when backward flow of burned gas occurs due to the centrifugal force created by rotation. In this study, we investigated the mechanisms of ultralean combustion in these flames by the detailed numerical analyses of the convective and diffusive transport of the main species. We found that, under ultralean conditions, the diffusive transport of fuel exceeds its backward convective transport in the flame zone, which is located on the burned-gas side of the stagnation point. In contrast, the relative magnitudes of diffusive and convective transport for oxygen are reversed compared to those for the fuel. The resulting flows for fuel and oxygen lead to what we call a ‘net flux imbalance’. This net flux imbalance increases the flame temperature and concentrations of active radicals. For hydrogen–air RCTF, a very large diffusivity of hydrogen enhances the net flux imbalance, significantly increasing the flame temperature. This behaviour is intrinsic to a very lean premixed flame in which the reaction zone is located in the backflow of its own burned gas.     

Interaction of highly charged ions with carbon-based materials using Kobe EBIS

Interaction of highly charged ions (HCIs) with surfaces produce various specific phenomena as a consequence of the potential energy that HCI possesses. In the present study, we have observed photon emission, structural, magnetic, and electronic modification on various carbon-based materials such as carbon nanotube by the impact of HCIs using an electron beam ion source named Kobe EBIS installed at the Kobe University. In order to study the potential effect, HCIs of Ar^q+ (q = 6–16) with the intensity of 0.1–1 nA are projected on the surface with a constant kinetic energy (16 keV). For photon emission measurements, we observed spatial and spectral distribution of visible light emission from the surface during irradiation with HCIs. On the other hand, the structural modification of multi-walled carbon nanotubes (MWCNTs) irradiated with HCIs has been analyzed using a transmission electron microscopy and Raman spectroscopy. Irradiation effects on the resistivity of single MWCNT supported on micrometer scale bridge pattern were also measured. We have also measured magnetic structure of highly oriented pyrolytic graphite irradiated with HCIs using electron spin resonance at low temperature. At the present paper, we will review our recent experimental results on the interaction of HCI with various carbon-based materials.     

127I NQR and 1H NMR studies of 4-aminopyridinium tetraiodoantimonate(III); molecular motion and phase transition

The crystals of 4-NH₂PyHSbI₄ (Py = C₅H₄N) have been investigated by means of ¹²⁷I NQR, ¹H NMR T ₁ and DTA. The crystals can exist in two modifications of β and α(I) at room temperatures. The α(I)-phase is a metastable state which is obtained when the stable β form is heated. The α(I)-phase undergoes a first-order type phase transition of α(I) $\leftrightarrow \alpha $ (II) at 272 K (on heating), while the β-phase is stable down to 77 K. Four and two ¹²⁷I (m = ±1/2 $\leftrightarrow \pm $ 3/2) NQR lines have been found for the β- and α(II)-phases, respectively. One half of them is assignable to the terminal I atom(s) and the other to the bridging I atom(s) in each phase. All the resonance lines of the α(II)-phase underwent a disappearance above ca. 240 K and no resonance line was observed in the α(I)-phase. The second moment M ₂ value of ¹H NMR spectra with 8 G² at 290 K shows that the 4-NH₂PyH^?+? cations reside in the rigid lattice in the β-phase. In contrast, in the α(I)-phase the cation rotates about an axis more symmetric than pseudo threefold axis. The activation energy of 21 kJ mol^???1 was estimated for the reorientational motion in the α(I)-phase from the ¹H NMR T ₁ measurements. The nature of phase transitions in the 4-NH₂PyHSbI₄ is discussed in comparison with that in 4-NH₂PyHSbBr₄.     

Curved Ferroelectric Liquid Crystal Matrix Displays Driven by Field-Sequential-Color and Active-Matrix Techniques

This paper describes a curved field-sequential-color matrix display using fast-response ferroelectric liquid crystal. Black matrix and transparent electrode patterns were formed on a thin plastic substrate by a transfer method from a glass substrate. While a composite film of liquid crystal and micro-polymers of walls and fibers was formed between the flexible substrates by printing, laminating and curing processes of a solution of monomers and liquid crystal, the mechanical stability was enhanced by use of multi-functional monomers to form large display panels. The image pixels of the matrix panel were driven by an active matrix scheme using an external switch transistor array at a frequency of 180 Hz for intermittent three-primary-color backlight illumination. The flexible A4-paper-sized color display with 24 × 16 pixels and 60 Hz field frequency was demonstrated by illuminating it with sequential three-primary-color lights from light-emitting diodes of the backlight. Our display system is useful in various information displays because of its freedom of setting and location.     

<Superscript>53</Superscript>Cr NMR study of CuCrO<Subscript>2</Subscript> multiferroic

The magnetically ordered phase of the CuCrO₂ single crystal has been studied by the nuclear magnetic resonance (NMR) method on ⁵³Cr nuclei in the absence of an external magnetic field. The ⁵³Cr NMR spectrum is observed in the frequency range ν_res = 61–66 MHz. The shape of the spectrum depends on the delay tdel between pulses in the pulse sequence τ_π/2–t _del–τ_π–t _del–echo. The spin–spin and spin–lattice relaxation times have been measured. Components of the electric field gradient, hyperfine fields, and the magnetic moment on chromium atoms have been estimated.     

Fourier domain optical coherence tomography using optical demultiplexers imaging at 60,000,000 lines/s

We describe high-speed Fourier domain optical coherence tomography (OCT) using optical demultiplexers (ODs) for spectral dispersion. The OD enables separation of a narrow spectral band of 14 GHz (0.11 nm) from a broadband incident light at 256 different frequencies in 25.0 GHz intervals centered at 192.2 THz (1559.8 nm). OCT imaging of 60,000,000 axial scans per second was achieved through parallel signal acquisition using 256 balanced photoreceivers to simultaneously detect all the output signals from the ODs in a Fourier domain OCT system. OCT imaging at a 16 kHz frame rate, 1100 A-lines per frame, 3 mm depth range, and 23 microm resolution was demonstrated using a resonant scanner for lateral scanning.     

Crosstalk Suppression in Header Recognition Unit Using Time-Space Conversion

We demonstrate a suppression effect of a crosstalk among a target and similar header signals using the header recognition filter designed by a design technique of the multiple-object discriminant filter.     

Dependence of relativistic backward wave oscillator properties oneffective beam gamma

The operation of a backward wave oscillator (BWO) is shown to be critically dependent on the energy of the slow space-charge wave of the electron beam. Experimental work parameterizing the dependence of microwave frequency on effective beam energy, γ_beam, reveals that through an understanding of electron-beam dynamics, a BWO could be systematically tuned through a desired frequency range while maintaining a high power of a few hundred megawatts and narrow frequency bandwidth, which was 400 MHz. Through variation of γ_beam, 1.2 to 1.5 for the experiment, the lack of scaling of peak microwave power with the kinetic energy of the electron beam for γ_beam >1.32 was observed. This effect was previously found in numerical simulation. In order to explain this effect, the relationship of the beam current to the space-charge-limiting current for increasing γ_beam is examined. Dramatic evidence of pulse shortening, a phenomenon known to relativistic oscillators, was also seen