Stability of AQUO-organic silver iodide sol

Summary The coagulation concentration for silver iodide sol, both in presence of pyridine and dioxane, increases for mono- and bivalent coagulating electrolyte. In presence of a mixture of pyridine and dioxane in equal volume, the coagulation concentration assumes an intermediate value, which is nearer to dioxane. However, in presence of dioxane more bivalent electrolyte is needed than in presence of pyridine. If a bivalent coagulating electrolyte is added to a sol containing a mixture of pyridine and dioxane, the amount of electrolyte required to coagulate is less than pyridine and greater than dioxane. Thus silver iodide sol is more stable toward mono- and bivalent coagulating electrolytes. The degree of stabilization increases with the decrease of the dielectric constant of the dispersing medium. The intermediate values for dioxane pyridine mixture is accountable by the fact that dioxane acts as a solvent for pyridine. The PH value of the sol increases up to the coagulation point. Beyond this, there is an abrupt decrease. When the particles settle down completely a rise in PH is again noted on the further addition of electrolytes. The increase in the electrical conductance is more significant after coagulation. These changes have been explained by adsorption of the ions and due to the release of ions from the electrical double layer.

---

Zusammenfassung Die Koagulationskonzentration für Silberjodidsol in Gegenwart von Pyridin und Dioxan steigt für ein- und zweiwertige Elektrolyte an. In Gegenwart einer Mischung zu gleichen Volumen erh?lt man mittlere Werte, n?her denen zu Dioxan. Für Koagulation in Gegenwart von Dioxan ist jedoch mehr zweiwertiger Elektrolyt notwendig als in Gegenwart von Pyridin. Bei Koagulation mit zweiwertigem Elektrolyt verbraucht ein Sol mit der Mischung von Pyridin und Dioxan weniger als für Pyridin und mehr als für Dioxan. Daher ist das Silbersol gegenüber ein- und zweiwertigen Elektrolyten stabiler. Der Grad der Stabilisierung w?chst mit abnehmender Dielektrizit?tskonstante des Dispersionsmediums. Die Zwischenwerte der Dioxan-Pyridin-Mischungen lassen sich verstehen durch die Tatsache, da? Dioxan als L?sungsmittel für Pyridin wirkt. Der PH-Wert des Sols w?chst bis zum Koagulationspunkt, darüberhinaus erfolgt ein steiler Abfall. Wenn die Teilchen vollst?ndig absetzen, ist bei weiterer Zugabe von Elektrolyt ein erneuter Anstieg im PH feststellbar. Der Anstieg der elektrolytischen Leitf?higkeit wird nach der Koagulation ausgepr?gter. Diese ?nderungen lassen sich durch Ionenadsorption und Freiwerden von Ionen aus der elektrischen Doppelschicht erkl?ren.

---

---

Our thanks are due to Prof. R. C. Mehrotra for providing all the facilities for this work and to Prof. S. Ghosh of Allahabad University for helpful discussions. Thanks are also due to the University Grants Commission, Government of India, for the award of a research scholarship to one of us (V. K. S.).     

Syntheses of the first N-mono- and N,N'-dipolyfluoroalkyl-4,4'-bipyridinium compounds

Reactions of 4,4'-bipyridine (1) with excess of polyfluoroalkyl iodides (2a-d) at 100-110 degrees C, under neat conditions, led to the formation of monoquaternary salts (3a-d) in > 90% yields. Salts 3a-d were metathesized with LiN(SO2CF3)2 either in water or water/acetone mixtures to form ionic liquids (4a-d), respectively, in > 88% yields. When 1 was reacted with 2.5 equivalent of 2a-c in DMF at 110 degrees C, the diquaternary salts 5a-c were formed in > 85% yields. Alternatively, 5a-c were also synthesized by heating a mixture of 3a-c and 2a-c (1.25 equivalent) in DMF. The metathesis reaction of 5a-c with LiN(SO2CF3)2 produced dicationic ionic liquids (6a-c) in > 86% yield.     

Spectrophotometric determination of traces of selenium(IV) in various environmental samples using the flow-injection technique (FIT)

A simple, sensitive, and rapid flow-injection spectrophotometric method was developed for the determination of trace amounts of selenium(IV). The method is based on the oxidation reaction of 3-methyl-2-benzothiazolinone hydrazone hydrochloride (MBTH) by selenium(IV) followed by the coupling reaction with chromotropic acid (4.5-dihydroxy naphthalene-2.7-disulphonic acid) in a basic medium (phosphate buffer, pH 10.5) to give a pink derivative with λ_max 530 nm that is stable for more than 7 days at 35°C. The reaction and flow conditions of the full experimental design were optimized. A detection limit (2s) of 0.25 μg/L Se(IV) was obtained at a sampling rate of 10 samples per hour. Beer’s law is obeyed for a Se(IV) concentration range of 0.05–0.5 μg/mL at the wavelength of maximum absorption. The detailed study of various interference ions indicates that the method is highly selective. The method was successfully applied to the determination of traces of selenium(IV) in various water samples. The results obtained were in good agreement with those obtained by the reported methods at the 95% confidence level. The text was submitted by the authors in English.     

Kinetics of substitution of aquo ligands fromcis-diaquo-bis-(biguanide) cobalt(III) and chromium(III) ions by aspartic acid in ethanol—water mixtures

The kinetics of substitution of aqua ligands fromcis-diaqua-bis(biguanide)cobalt(III) and chromium(III) ions by aspartic acid in EtOH–H₂O media have been studied spectrophotometrically in the 30 to 45°C range. We propose the following rate law for the anation

Vinyl polymerization: Kinetics of Ce(IV)–acetophenone-initiated polymerization of acrylonitrile in acetic–sulfuric acid mixtures

The polymerization of acrylonitrile (M) initiated by the Ce(IV)–acetophenone (AP) redox pair has been studied in acetic–sulfuric acid mixtures in a nitrogen atmosphere. The rate of polymerization is proportional to [M]^3/2, [AP]^1/2 and [Ce(IV)]^1/2. The rate of disappearance of ceric ion,–R_Ce, is proportional to [AP], [M], and [Ce(IV)]. The effect of certain salts, solvent, acid and temperature on both the rates have been investigated. A suitable kinetic scheme has been proposed, and the composite rate constants k_p ²(k/k/_t) and k₀/k_i are reported.     

The chemistry of cyclic enaminoketones. III. Synthesis of bi- and tricyclic enaminoketones from enamine esters and nitriles

The cyclization of enamines derived from β-aminoesters and β-aminonitriles into bi- and tricyclic enaminoketones ( 6,9,13 and 24 ) has been investigated. The enamines derived from aminonitriles cyclize smoothly with magnesium perchlorate in benzene or toluene, whereas the enamines derived from aminoesters cyclize spontaneously during their formation. The scope and limitation of this process is discussed.     

Volumetric studies in oxidation-reduction reactions: Oxidation with chloramine-t. iodine monochloride method

Chloramine-T has been used as an oxidizing agent in hydrochloric acid medium' for the volumetric estimations of potassium iodide, hydrazine sulphate, arscnious oxide, stannous chloride, mercurous chloride, tartar-emetic, potassium thiocyanate and ferrous ammonium sulphate, using iodine monochloride as a catalyst and pre-oxidizer. Chloroform is used as an indicator. It is coloured pink owing to the liberation of iodine during the titration and becomes very pale yellow at the end-point because of the formation of iodine monochloride.     

Silica-alumina supported transition metal oxide catalyst for alkylation of aromatic compounds

Titanium oxide on silica-alumina support is described to be an efficient regenerable catalyst for alkylation of aromatic compounds with alkyl halides, alcohols and olefins, and the reaction is proposed to be initiated by the protonated metal active species present in the catalyst.     

A Sensitive HPTLC Method for Estimation of Amentoflavone,a Bioactive Principle from Biophytum sensitivum (Linn.) DC. and Putranjiva roxburghii Wall.

JPC – Journal of Planar Chromatography – Modern TLC - A sensitive high-performance thin-layer chromatographic (HPTLC) method has been developed for estimation of amentoflavone, an...     

On the characterization of electrified interface

Summary Estimation of zeta potential from experimental data on electroosmotic and electrophoretic effects for Zeokarb 225 (Na⁺ form)/methanol-water system has been made and discussed. Results indicate that zeta potentials estimated from electroosmotic flux and electrophoretic mobility are not in agreement and vary with applied potential difference in a linear manner. Reasons for the variation of zeta potential with electrical field have been discussed. It has been argued that zeta potentials estimated from electroosmotic data are more reliable in comparison to the values obtained from electrophoretic data.With 2 figures and 2 tables