The effective charge effect in partially stripped ion-helium collisions

The double and single ionization cross section ratios of helium by partially stripped carbon, oxygen and fluorine ions are measured for projectile charge states ranging from +1 to +4 and impact energies from 1.5 MeV to 7.5 MeV. The effective charge effect in partially stripped ion-helium collisions is studied. It is found that the effective charge q_eff increases as the impinging energy increases and q _eff shows a modest dependence upon the projectile charge state in the present energy range. The projectile charge state, projectile energy, projectile and target electronic state dependences of the effective charge effect may be explained using orbital interpenetrating.     

金属柱平板慢波系统高频特性研究

对于离散的金属柱结构构建的周期性平板慢波系统,本文利用3维FDTD方法结合HFSS仿真软件深入分析了该慢波系统的高频特性.研究了金属柱高度、周期长度对色散特性的影响,计算了耦合阻抗,并与传统光栅慢波系统特性进行了对比分析.分析表明金属柱慢波系统既有与传统光栅慢波系统相似的高频特性,又具有独自的特点,位于离散的金属柱周期间隙中的电子注互作用耦合阻抗具有对称性;金属柱结构用作真空电子器件的高频系统可增加发生有效互作用的电子注厚度,降低起振电流密度,提高器件效率.本文的分析结果为设计低电流密度工作的多电子注短毫 关键词： 金属柱平板慢波系统 3维FDTD算法 色散特性 耦合阻抗     

高功率半导体激光端面泵浦方形掺Nd3+离子激光晶体热形变研究

为了解决高功率半导体激光器端面泵浦激光晶体引起的热效应问题,激光晶体泵浦端面的热形变必须进行准确的计算.通过对于全固态激光器中激光晶体的工作特点分析,建立了矩形截面激光晶体热分析模型.基于热传导方程,提出了泊松方程的一种新解,并获得了矩形截面激光晶体端面热形变分布的一般解析表达式.同时讨论了半导体激光器偏心泵浦激光晶体给端面热形变带来的影响.与有限元分析方法以及其他数值分析方法相比,解析分析方法不会给计算引入任何的误差.热形变的解析分析为解决激光晶体的热效应问题以及提高激光器的性能提供了理论的依据.     

利用微悬臂梁表面应力研究聚N-异丙基丙烯酰胺分子的构象转变

提出了一种基于微悬臂梁传感技术研究大分子折叠/构象转变的新方法.通过分子自组装的方法将热敏性的聚N-异丙基丙烯酰胺(PNIPAM)分子链修饰到微悬臂梁的单侧表面,用光杠杆技术检测温度在20-40 ℃之间变化时由于微悬臂梁上的PNIPAM分子在水中的构象转变所引起的微悬臂梁变形.实验结果显示:在升温过程中,微悬臂梁的表面应力发生了变化并且导致微悬臂梁产生了弯曲变形,这个过程对应着微悬臂梁上的PNIPAM分子从无规线团构象到塌缩小球构象的构象转变.在降温过程中,微悬臂梁发生了反方向的弯曲变形,这对应着PNIPAM分子从塌缩小球构象向无规线团构象的构象转变.整个温度变化过程中构象转变是连续进行的,而在低临界溶解温度(约32 ℃)附近转变幅度较大,这与自由水溶液中PNIPAM分子的无规线团-塌缩小球构象转变相对应.实验结果还显示:由于PNIPAM分子在塌缩过程中氢键的形成和链段间可能的缠结效应,整个温度循环过程中微悬臂梁的变形是不可逆的且有明显的迟滞效应.     

Tm3+/Yb3+共掺铋碲酸盐玻璃中的高效蓝色上转换荧光

制备了高折射率Tm3+/Yb3+共掺杂铋碲酸盐玻璃,利用棱镜耦合法测量出玻璃在632.8和1550 nm波长处的折射率分别为2.0365和1.9795. 对玻璃的吸收、荧光和红外透过光谱展开了测试与分析,根据Judd-Ofelt理论对吸收光谱进行拟合,求得Tm3+的振子强度参数Ωt(t=2,4,6)分别为3.90×10-20, 2.03×10-20和9.03×10-21 cm2,并进一步计算了Tm3+在玻璃中各能级跃迁的振子强度、自发辐射跃迁概率、辐射寿命和荧光分支比等光谱参数. 在980 nm激光激发下测得强的蓝色三光子上转换和近红外双光子上转换荧光. 宽的红外透过窗口、高的折射率和强的蓝色上转换荧光表明,Tm3+/Yb3+共掺铋碲酸盐玻璃有希望成为高效的上转换发光和激光材料.     

Study of passive Q-switching for flash-lamp-pumped 1.34-μm Nd:GdVO4 laser

The static laser performance of a-growth Nd:GdVO4 crystal (a-cut, 4 × 4 × 25 (mm)) at 1.34μm pumped by flash-lamp is investigated with different transmissions of output couplers. With the output coupler transmission of T = 30%, the static output energy of 148 mJ is obtained when the pump energy is 35.2 J,and the corresponding electric-optical conversion efficiency is 0.42%. The Q-switched output of lasers with the output wavelength ranging from 1.3 to 1.6 μm can be realized by using Co2+ :LaMgAl11O19 (Co:LMA)as saturable absorber. A flash-lamp-pumped, passively Q-switched Nd:GdVO4 laser with Co:LMA as saturable absorber is demonstrated in plano-concave laser cavity. With the cavity length of 16.3 cm and pump energy of 19.8 J, the single-pulse output energy, pulse width, and peak power are obtained to be 4m J, 80 ns, and 5 × 104 W, respectively.     

Demonstration of fiber-laser-produced plasma source and application to efficient extreme UV light generation

Efficient generation of extreme UV (EUV) light at lambda = 13.5 nm from a bulk Sn target has been demonstrated by using a fiber laser. The conversion efficiency from the 1064 nm IR to the EUV was measured to be around 0.9% into 2pi steradians within a 2% bandwidth. To the best of our knowledge, this is the first time an all-fiber system was used to generate EUV or soft x rays.     

光栅周期包含的Bragg层数对Bragg型凹面衍射光栅的影响

单个衍射光栅周期所包含的Bragg周期层数是连续Bragg齿型凹面衍射光栅的主要参数之一,该参数可改变光栅齿结构,对凹面衍射光栅的分辨力.自由光谱范围及衍射效率有重要影响.本文通过理论分析与仿真模拟,对比了4种不同层数的Bragg型凹面衍射光栅的特性参数.研究结果表明:在衍射光栅尺寸不变的情况下,改变单个光栅周期包含的Bragg周期层数不会显著提高器件主衍射级次的分辨力;单个光栅周期包含的Bragg周期层数与光栅可衍射的级次数成正相关.单周期层数的Bragg凹面衍射光栅的主衍射级次效率最高,其可衍射的级次数最少,且其他衍射级次分散的能量最少;增加单个光栅周期所包含的Bragg周期层数会降低主衍射级次的自由光谱范围.该研究对于设计低插损、高分辨率、宽工作波段的波分复用器或光栅光谱仪具有重要的指导意义.     

Deterministic Assisted Clone of an Arbitrary Two- and Three-qubit States via Multi-qubit Brown State

We present two schemes for deterministic assisted clone(DAC) of an unknown two- and three-qubit entangled states with assistance via muti-qubit Brown state. In the schemes, the sender wish to teleport an unknown original entangled state which from the state preparer, and then create a perfect copy of the unknown state at her place. The DAC schemes include two stages. The first stage requires teleportation with Bell-state measurements via a five-qubit Brown state(or seven-qubit Brown state) as the quantum channel. In the second stage, to help the sender realize the quantum cloning, the state preparer performs projective measurements on their own particles which from the sender, then the sender can acquire a perfect copy of the unknown state by means of some appropriate unitary operations. Furthermore, the total success probability for assisted cloning a perfect copy of the unknown state can reach 1 in our schemes.