Fabrication and characterization of zinc oxide anti-reflective coating on flexible thin film microcrystalline silicon solar cell

This paper studies the fabrication and characterization of 80 nm zinc oxide anti-reflective coating (ARC) on flexible 1.3 μm thin film microcrystalline silicon (μc-Si) solar cell. High resolution X-ray diffraction (HR-XRD) shows a c-axis oriented ZnO (0 0 2) peak (hexagonal crystal structure) at 34.3° with full width at half maximum (FWHM) of 0.3936°. Atomic force microscope (AFM) measures high surface roughness root-mean-square (RMS) of the layer (50.76 nm) which suggests scattering of the incident light at the front surface of the solar cell. UV–vis spectrophotometer illustrates that ZnO ARC has optical transmittance of more than 80% in the visible and infra-red (IR) regions and corresponds to band gap (E_g) of 3.3 eV as derived from Tauc equation. Inclusion of ZnO ARC successfully suppresses surface reflectance from the cell to 2% (at 600 nm) due to refractive index grading between the Si and the ZnO besides quarter-wavelength (λ/4) destructive interference effect. The reduced reflectance and effective scattering effect of the incident light at the front side of the cell are believed to be the reasons why short-circuit current (I_sc) and efficiency (η) of the cell improve.     

Temperature dependent electrical conductivity of polyaniline/Y2O3 composites

Composites of polyaniline with yttrium oxide (Y₂O₃) nanoparticles have been prepared by chemical polymerizations method by increasing the weight percentage of yttrium oxide. X-Ray diffraction (XRD) and Fourier Transform Infrared Spectra (FTIR) were used to characterize the composites. XRD and FTIR pattern indicate that Polyaniline (PANI) is intercalated into the layers of Y₂O₃ nanoparticles successfully by in situ polymerization and therefore the degree of crystallinity increases due to crystalline of yttrium oxide nanoparticles. The scanning electron micrographs (SEM) also confirm the formation of dual phase of platelet as well as of flaky structure in PANI-Y₂O₃. Temperature dependant DC conductivity showed three dimensional variable ranges hopping (3D VRH) model. Activation energy, density of states and hopping length are calculated and found to be influenced by intercalating PANI into the layers of Y₂O₃ clay.     

Electrical Impedance Spectroscopic Study of CNT/Ethylene-alt-CO/Propylene-alt-CO Polyketones Nanocomposite

Impedance spectroscopy was utilized to investigate the dielectric properties, ac conductivity and charge transport mechanisms in propylene-alt-CO/ethylene-alt-CO (EPEC) random terpolymer filled with multi-walled carbon nanotubes (MWCNT) as a function of nanofiller content, frequency, and temperature. Equivalent resistor-capacitor (RC) circuit models were proposed to describe the impedance characteristics of the unfilled terpolymer and the nanocomposite at different temperatures. For the nanocomposites, the ac conductivity tended to be frequency independent at low frequencies. At high frequencies, the ac conductivity increased with frequency. The dc conductivity (i.e., plateau of the ac conductivity at low frequencies) at room temperature increased from 10^?9 (Ω·m)^?1 for the unfilled polymer to l0^?3 (Ω·m)^?1 for the 6 wt% MWCNT/EPEC nanocomposite. At low temperatures, the equivalent RC model for EPEC-0 and EPEC-2 was found to consist of a parallel RC circuit. However, for 6 wt% MWCNT/EPEC nanocomposite, an RC model consisting of an R/constant phase element (CPE) circuit and a resistor in series was required to describe the impedance behavior of the nanocomposite.     

Direct asymmetric Michael addition of ketones to chalcones catalyzed by a hydroxyphthalimide derived triazole–pyrrolidine

An efficient protocol for the enantioselective Michael additions of ketones to chalcones catalyzed by a hydroxyphthalimide linked triazole–pyrrolidine derivative has been developed. The corresponding products, 1,5-dicarbonyl compounds, were obtained in good yields with high levels of stereoselectivities under mild reaction conditions employing benzoic acid as an additive.     

Multifunctional mesoporous silica nanoparticles in poly(ethylene‐co‐vinyl acetate) for transparent heat retention films

Transparent inorganic‐polymer nanocomposite films are of tremendous current interest inemerging solar coverings including photovoltaic encapsulants and commercial greenhouse plastics, but suffer from significant radiative heat loss. This work provides a new and simple approach for controlling this heat loss by using mesoporous silica/quantum dot nanoparticles in poly(ethylene‐co‐vinyl acetate) (EVA) films. Mesoporous silica shells were grown on CdS‐ZnS quantum dot (QDs) cores using a reverse microemulsion technique, controlling the shell thickness. These mesoporous silica nanoparticles (MSNs) were then melt‐mixed with EVA pellets using a mini twin‐screw extruder and pressed into thin films of concentration variable controlled thickness. The results demonstrate that the experimental MSNs showed improved infrared and thermal wavebands retention in the EVA transparent films compared to commercial silica additives, even at lower concentrations. It was also found MSNs enhanced the quantum yield and photostability of the QDs, providing high visible light transmission and blocking of UV transmission of interest for next generation solar coatings. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 851–859     

Fluctuation study of pionisation in ultrarelativistic nucleus-nucleus interaction

The scaled factorial moments and the multifractal moments have been investigated in different??-intervals to study the dynamical fluctuation of pions produced in 200 AGeV³²S-Ag/Br interaction. In order to investigate the detail characteristics of intermittency behaviour, theF-moments are extracted up to the eighth order of moments in differentM-intervals. The analysis indicates a non-thermal phase transition and different regime of particle production during the hadronisation process.     

A Novel One Pot Synthesis of o‐Nitrophenylacetic Acid and Unexpected p‐Nitrobenzoic Acid by HNO3‐Mediated CH2 Extrusion Reaction of Phenylacetic Acid

The HNO₃‐mediated CH₂ extrusion reactions of phenylacetic acid lead to one pot synthesis of unexpected commercially important product 4‐nitrobenzoic acid through the formation of 4‐nitrophenylacetic acid and 2‐nitrophenylacetic acid.     

Measuring powder flowability with a modified Warren Spring cohesion tester

The measurement of powder flowability is a major concern for most industrial processes that deal with the handling of bulk solids as raw materials,intermediates,or products.The development of devices that measure the flowability of non-aerated powders has not progressed as rapidly as might have been hoped since most research activities have been based on various types of shear testers intended to aid the design of hoppers.A new flowability indicator named as weighted cohesion (WS) is established using newly...     

Dynamic Mechanical Properties of Activated Carbon–Filled Epoxy Nanocomposites

Nano-activated carbons obtained from oil palm empty fiber bunch (AC-EFB), bamboo stem (AC-BS), and coconut shells (AC-CNS) were reinforced in epoxy matrix to fabricate epoxy nanocomposites. The dynamic mechanical analysis of epoxy nanocomposites was carried out, and 5% AC-CNS treated with KOH-filled epoxy composites displayed the highest storage modulus of all the activated carbon–filled epoxy composites. The incorporation of a small amount of AC-BS, AC-EFB, and AC-CNS to the epoxy matrix enhanced the damping characteristics of the epoxy nanocomposites. The 5% AC-EFB treated with H₃PO₄ filled epoxy composites showed the highest glass transition temperature (T_g) in all temperature ranges.