Crystalline polysilicate magadiite with intercalated n-alkylmonoamine and some correlations involving thermochemical data

Synthesized hydrated lamellar acidic crystalline magadiite (H₂Si₁₄O₂₉·2H₂O) nanocompound was used as host for intercalation of polar n-alkylmonoamine molecules of the general formula H₃C(CH₂)_nNH₂ (n = 1–6) in aqueous solution. The original interlayer distance (d) of 1500 pm, determined by X-ray powder diffraction patterns, increases after intercalation. The values correlated with the number of aliphatic amine carbon (n_c) atoms: d = [(1312 ± 11) + (21 ± 2)]n_c. The amount of intercalated amines (N_s), decreased as n_c increased: N_s = [(5.82 ± 0.04) − (0.45 ± 0.01)]n_c. The acidic layered nanocompound was calorimetrically titrated with the amines and the thermodynamic data gave exothermic values for all guest molecules, as shown by the correlation: Δ_intH = −[(24.45 ± 0.49) − (1.91 ± 0.10)]n_c and d = [(1576 ± 16) − (10.8 ± 1.0)]Δ_intH. The negative values of the Gibbs energies and the positive entropies also presented the correlations: Δ_intG = −[(22.8 ± 0.2) − (0.2 ± 0.1)]n_c and Δ_intS = [(6 ± 1) + (5 ± 1)]n_c, respectively.     

Determination of the insecticide fenoxycarb in apple leaf samples by an enzyme-linked immunosorbent assay

An enzyme-linked immunosorbent assay (ELISA) was used for the determination of fenoxycarb in apple leaf samples. Single step extraction procedures with phosphate-citrate buffered solution containing different amounts of methanol were tested showing that a solvent percentage of 20% (v/v) was the best condition, with recoveries between 85 and 100% in the working range of 25-500 μg kg⁻¹ and a negligible matrix effect. The low detection limit reached, 1 μg kg⁻¹ against 50 μg kg⁻¹ for the recommended liquid chromatographic method, makes the ELISA more suitable for determinations of the fenoxycarb residues in apple leaf samples. The reliability of the ELISA was evaluated by assaying the insecticide in spiked and contaminated samples by three different approaches: direct determination, standard addition method with a calibration graph, and the dilution test. The corresponding coefficients of variation were, respectively, 11, 22 and 27%. The direct determination on the (1+1) diluted apple leaf extract was used to measure the insecticide residues in samples collected in the north-eastern Italian regions of Veneto and Trentino-Alto Adige.     

Defect and dopant properties of MgTa2O6

Atomistic computer simulation techniques have been used, for the first time, to reproduce the crystal structure of MgTa₂O₆ and to investigate the defect chemistry and dopant properties of this material. The calculated defect energetics suggest that the concentration of intrinsic atomic defects in this phase is insignificant and that the system is probably stable to both oxidation and reduction. Dopant solution energy versus ion size trends are found for both isovalent and aliovalent dopant incorporation at Mg and Ta sites. Divalent dopants (e.g. Ca, Cu) preferentially occupy the Mg site whereas dopants with higher charge (e.g. Sc, Zr, Nb) are more favorable on the Ta site. High migration activation energies (>2 eV) predict limited ionic conductivity in this material.     

Detection of a stable nitroxide during chemical depolymerization of heparin

The use of low-molecular-weight heparins (LMWHs) has become common, since compared to unfractionated heparin (UFH), they have a much longer plasma half-life and lower incidence of side effects. LMWHs are derived from the depolymerization of UFH, obtained either chemically, physically or enzymatically. We employed electron spin resonance (ESR) spectroscopy to study the depolymerization of UFH by copper in the presence of hydrogen peroxide. A stable nitroxide radical was detected. This could be generated by the hydroxyl radical attack either to the N-SO⁻₃ group or to free amino groups present in the UFH preparation.     

Direct determination of selenium in urine samples by electrothermal atomic absorption spectrometry using a Zr plus Rh-treated graphite tube and co-injection of Rh as chemical modifier

Different chemical modifiers for use with electrothermal atomic absorption spectrometry (ET AAS) were investigated in relation to determining the selenium in human urine samples. The samples were diluted in a solution containing 1% v/v HNO₃ and 0.02% m/v cetyltrimethylammonium chloride (CTAC). Studying the modifiers showed that the use of either Ru or Ir as the permanent modifier gave low sensitivity to Se and the peak shape was very noisy, while Zr or Rh gave no peak at all. The same occurred when Zr was used in solution. For mixtures of permanent modifiers, Ir plus Rh or Zr plus Rh gave very low sensitivity, Zr plus Rh with co-injection of Ir in solution was also not efficient, Zr plus Rh in solution gave good sensitivity, but the best results were obtained with a mixture of Zr and Rh as the permanent modifier and co-injection of Rh in solution. Using this last modifier, the following dilutions with the HNO₃ and CTAC were studied: 1:1, 1:2, 1:3 and 1:4. The best dilution was 1:1, which promoted good sensitivity and a more defined peak shape and made it possible to correct for the background using a deuterium arc lamp. Under these conditions, a characteristic mass of 26±0.2 pg was obtained for Se in aqueous solution. Six certified urine samples were analyzed using matrix matching calibration and the measured concentrations were in agreement with the certified values, according to a t-test at the 95% confidence level. Recovery tests were carried out and the recoveries were in the range 100–103%, with relative standard deviation better than 9%. The limit of detection (LOD, 3 sd, n=10) was 3.0 μg L⁻¹ in the sample. The treated graphite tube could be used for at least 600 atomization cycles without significant alteration of the analytical signal.     

Complete 1H and 13C NMR assignments of aurasperone A and fonsecinone A, two bis-naphthopyrones produced by Aspergillus aculeatus

Complete assignments of 1H and 13C NMR chemical shifts of the polyketides aurasperone A and fonsecinone A were made by means of nuclear Overhauser enhancement and heteronuclear NMR correlation experiments. These compounds were isolated for the first time from Aspergillus aculeatus, an endophytic fungus obtained from leaves of Melia azedarach(Meliaceae).     

Intramolecular [4 + 2] cycloadditions of 1,3-enynes or arylalkynes with alkenes with highly reactive cationic phosphine Au(I) complexes

New Au(I) complexes with bulky, biphenyl phosphines are the most reactive catalysts for the cyclizations of enynes. 1,6-Enynes with an aryl ring at the alkyne give 2,3,9,9a-tetrahydro-1H-cyclopenta[b]naphthalenes by a 5-exo-dig cyclization followed by a Nazarov-type ring expansion. 1,8-Dien-3-ynes also cyclize by a 5-exo-dig pathway to form hydrindanes.     

Crystalline calcium phenylphosphonate—thermodynamic data on n-alkylmonoamine intercalations

Lamellar crystalline calcium phenylphosphonate, as anhydrous Ca(HO₃PC₆H₅)₂ and hydrated Ca(HO₃PC₆H₅)₂·2H₂O compounds, were used as hosts for intercalation of polar n-alkylmonoamine molecules of the general formula CH₃(CH₂)_nNH₂ (n=0–4, 7) in water or 1,2-dichloroethane. An increase in the interlayer distance was observed. The exothermic enthalpic values for intercalation increased with the number of carbon atoms and with increasing concentration of the amines. The intercalation followed by a titration procedure in the solid/liquid interface with Ca(HO₃PC₆H₅)₂·2H₂O and Ca(HO₃PC₆H₅)₂ gave the enthalpy/number of carbons correlations: Δ_intH=−(1.74±0.43)–(1.30±0.13)n_c and Δ_intH=−(4.15±0.15)–(1.07±0.03)n_c, for water and 1,2-dichloroethane, respectively. A similar correlation Δ_intH=−(4.27±0.80)–(1.85±0.21)n_c was obtained in water by using the ampoule breaking procedure for Ca(HO₃PC₆H₅)₂·2H₂O. The increase in exothermic enthalpic values with the increase in n-aliphatic carbon atoms is more pronounced for the anhydrous compound and also when using the ampoule breaking procedure. The Gibbs free energies are negative. Positive entropic values favor intercalation in these systems.     

Reactions of 2-pyridylphenylacetonitrile and 1,2-dicyano-1,2-diphenyl-1,2-di(2-pyridyl)ethane with cobalt(II), nickel(II), copper(II) and zinc(II) chlorides and copper(II) bromide

Summary 2-Pyridylphenylacetonitrile (ppa) is oxidized by copper(II) halides in 1,2-dichloroethane to 1,2-dicyano-1,2-diphenyl-1,2-di(2-pyridyl)ethane (dcppe), yielding 41 complexes of dcppe with copper(II) dihalide, [CuX₂(dcppe)₄] (green). Nickel(II) and zinc(II) chlorides react with ppa giving complexes of a general formula [MCl₂(ppa)₂].Dcppe reacts with copper(II), zinc(II) chlorides and copper(II) bromide yielding complexes of formulae [CuCl₂(dcppe)₄] (yellow), [ZnCl₂(dcppe)₂] and [CuBr₂(dcppe)]. No reaction is observed with cobalt(II) and nickel(II) chlorides.     

Convenient diastereospecific synthesis of a rociverine precursor and its resolution by lipase-catalyzed transesterification

(±)-1-Cyclohexyl-c-2-hydroxymethyl-r-1-cyclohexanol 3, a precursor of the antimuscarinic drug Rociverine 1, was obtained diastereospecifically in very high yield, from the Grignard reaction between C₆H₁₁MgCl and an appropriately protected 2-(hydroxymethyl)cyclohexanone. The preparation of enantiomerically enriched cis diol (+)-(1R,2S)-3 and the corresponding 2-acetoxymethyl derivative (+)-(1S,2R)-12 was achieved by lipase PPL-catalyzed transesterification of racemic diol (±)-3.