Fast Liquid Phase Epitaxial Growth for Perovskite Single Crystals

Semiconductors grown by the solution-processed method have shown low-cost,facile fabrication process and comparable performance.However,there are many reasons why it is difficult to achieve high quality films.For example,lattice constant mismatch is one of the problems when photovoltaic devices made of organ metallic perovskites.In this work,MAPbBr^{MA=CH3NH3^+}perovskites single crystals grown on the surface of MAPbBr2.5 CI0.5 perovskites single crystals via liquid epitaxial growth method is demonstrated.It is found that when the lattice constants of the two perovskite single crystals are matched,another crystal can be grown on the surface of one crystal by epitaxial growth.The whole epitaxy growth process does not require high heating temperature and long heating time.X-ray diffraction method is used to prove the lattice plane of the substrate and the epitaxial grown layer.A scanning electron microscope is used to measure the thickness of the epitaxial layer.Compared with perovskite-based photodetectors without epitaxial growth layer,perovskite-based photodetectors with epitaxial growth layer have lower dark current density and higher optical responsibility.     

Predicting Quantum Many-Body Dynamics with Transferable Neural Networks

Advanced machine learning(ML)approaches such as transfer learning have seldom been applied to approximate quantum many-body systems.Here we demonstrate that a simple recurrent unit(SRU)based efficient and transferable sequence learning framework is capable of learning and accurately predicting the time evolution of the one-dimensional(ID)Ising model with simultaneous transverse and parallel magnetic fields,as quantitatively corroborated by relative entropy measurements between the predicted and exact state distributions.At a cost of constant computational complexity,a larger many-body state evolution is predicted in an autoregressive way from just one initial state,without any guidance or knowledge of any Hamiltonian.Our work paves the way for future applications of advanced ML methods in quantum many-body dynamics with knowledge only from a smaller system.     

一种双模压缩微波制备的相位锁定方案

相位锁定是双模压缩微波制备的关键问题之一.针对基于超导180°混合环的制备方案相位稳定度不高且信息处理复杂等问题,提出一种相位锁定方案.对约瑟夫森参量放大器的信号输入进行相位调制,输出的单模压缩微波与另一未调制的同频单模压缩微波在超导180°混合环内干涉,实现双模压缩微波的制备与路径分离.将未调制的单模压缩微波与一路双模压缩微波混频,解调出相位调制信号可得到两路单模压缩微波的相对相位及误差,将相位误差反馈于约瑟夫森参量放大器的抽运实现相对相位的锁定,获得稳定的双模压缩输出.本研究对高性能纠缠微波源的设计提供了理论参考.     

表面效应对铁<100>间隙型位错环的影响

在材料辐照损伤过程中,间隙型位错环的形成及动力学行为严重影响材料在辐照条件下的服役行为.在常用的以体心立方铁为基的合金材料中,1/2<111>和<100>是两种主要的位错环,其对辐照损伤的影响一直都是核材料领域研究的热点之一.在之前的研究中,人们对{111}面与单个1/2<111>位错环的相互作用进行了深入研究,发现表面对位错环性质确实有重要的影响.采用分子动力学方法,在原子尺度详细研究了另一个重要的表面铁{100}面对<100>间隙型位错环动力学过程的影响.模拟发现位错环伯格斯矢量与表面法线方向的关系、距表面的深度、位错环之间的相互作用以及温度等,都对位错环与表面的相互作用产生重要影响,其中,表面作用下的伯格斯矢量的演化以及<100>位错环在此过程中的一维运动首次被发现.基于这些模拟结果,就<100>位错环对表面辐照损伤结构的影响进行详细地研究,给出<100>位错环对表面凹凸结构的贡献,这些结果为理解辐照过程中材料表面的演化提供一种可能的解释.     

NO分子宏观气体热力学性质的理论研究

采用量子统计系综理论,研究了基态NO分子宏观气体摩尔熵、摩尔内能、摩尔热容等热力学性质.首先应用课题组前期建立的变分代数法(variational algebraic method, VAM)计算获得了基态NO分子的完全振动能级,得到的VAM振动能级作为振动部分,结合欧拉-麦克劳林渐进展开公式的转动贡献,应用于经典的热力学与统计物理公式中,从而计算得到了1000-5000 K温度范围内NO宏观气体的摩尔内能、摩尔熵和摩尔热容.将不同方法计算得到的摩尔热容结果分别与实验值进行比较,结果表明基于VAM完全振动能级获得的结果优于其他方法获得的理论结果.振动部分采用谐振子模型对无限能级求和计算热力学性质的方法有一定的局限性,应当使用有限的完全振动能级进行统计求和.     

碳纳米管的可控长度拾取及导电性分析

拾取指定长度的半导体性碳纳米管对大规模制造碳纳米管场效应管具有重要意义.本文提出了一种利用原子力显微镜探针和钨针对碳纳米管进行可控长度拾取的方法并进行了碳纳米管导电性分析.在扫描电子显微镜下搭建微纳操作系统,针对切割操作过程中原子力显微镜探针、钨针和碳纳米管的接触情况进行了力学建模和拾取长度误差分析.建立了单根金属性碳纳米管、单根半导体性碳纳米管及碳纳米管束与钨针接触的电路模型,推导了接入不同性质碳纳米管后电路的电流电压特性方程.使用原子力显微镜探针对碳纳米管的空间位姿进行调整,控制钨针对碳纳米管上目标位置进行通电切割,同时获取切割电路中的电流电压数据.实验结果表明,本文提出的方法能够有效控制所拾取碳纳米管的长度,增加碳纳米管与原子力显微镜探针的水平接触长度能够减小碳纳米管形变导致的拾取长度误差,建立的电流电压特性方程能够用于分析碳纳米管的导电性.     

基于连续量子级联激光器的1103.4cm–1处NH3混叠吸收光谱特性研究

由于NH3在大气气溶胶化学中具有重要作用,所以快速和精确反演NH3浓度对环境问题非常重要.本文以9.05μm的室温连续量子级联激光器(quantum cascade laser,QCL)作为光源,采用波长扫描直接吸收可调谐二极管激光吸收光谱(tunable diode laser absorption spectroscopy,TDLAS)技术,研究了QCL在1103.4 cm–1的光谱特性,获得了激光器控制的温度电流与波长的关系.设计了QCL二级温控的低压实验平台,测量氨气在1103.4 cm–1处的6条混叠吸收线,在降低压强的情况下谱线展宽变小,使混叠光谱分离,由此计算各条吸收线的线强,进一步对测量不确定度进行分析.针对混叠严重的光谱提出了低压分离单光谱精确反演气体浓度的方法,并进行了实验验证.通过与HITRAN数据库进行结果对比,得出氨气在1103.4 cm–1的实验测量线强值与数据库偏差为2.71%-4.71%,实验测量线强值的不确定度在2.42%-8.92%,极低压条件下反演浓度与实际值的偏差在1%-3%.     

复杂势场量子弹球中疤痕态的量子化条件

量子疤痕是波函数在经典不稳定周期轨道周围反常凝聚的一种量子或波动现象.人们对疤痕态的量子化条件进行了大量研究,对深入理解半经典量子化起到了一定的促进作用.之前大部分研究工作主要集中在硬墙量子弹球上,即给定边界形状的无穷深量子势阱系统.本文研究具有光滑复杂势场的二维量子弹球系统,考察疤痕态的量子化条件及其重复出现的规律,得到了与硬墙弹球不一样的结果,对理解这类现象是一个有益的补充.这些结果将有助于理解具有无规长程杂质分布的二维电子系统的态密度谱和输运行为.     

Polarization in D-shaped fiber modulated by magneto-optical dichroism of magnetic fluid

The polarization of a D-shaped fiber is modulated after immersing it in magnetic fluid(MF)and applying a magnetic field.Theoretical analysis predicts that magneto-optical dichroism of MF plays a key role in light polarization modulation.During light polarization modulation,the evanescent wave polarized parallel to the magnetic field has greater loss than its orthogonal component.Light polarization of a D-shaped fiber with a wide polished surface can be modulated easily.High concentration MF and a large magnetic field all have great ability to modulate light polarization.     

A reconfigurable terahertz polarization converter based on metal–graphene hybrid metasurface

A metal-graphene hybrid metasurface polarization converter is designed in this Letter.The unit cell of the hybrid metasurface is composed of a butterfly-shaped structure whose branches are connected by multi-layer graphene sheets.The proposed device can be reconfigured from linear-to-circular polarization to cross-polarization by changing the Fermi energy of graphene.The simulation results show that for three-layer graphene,the device acts as a linear-to-circular polarization converter when EF=0 eV and switches to a cross-polarization converter when EF=0.5 eV.Compared with single-layer graphene,the device with three-layer graphene can maintain the cross-polarization conversion performance under low Fermi energy.Furthermore,two equivalent circuits in the x and y directions are developed to understand the working mechanism of the device.