关于三次高斯和的均值

主要研究三次高斯和的均值性质，并给出一个较强的渐近公式。     

大面积玻璃RPC模型与性能测试

介绍了可用于粒子探测的大面积玻璃高阻板探测器RPC(Resistive Plate Chamber).使用两块间隔2mm的普通浮法玻璃作为电极,其中充入流动的混合气体(氩气+异丁烷+F134A),工作高压约9600V;性能测试结果,其单室效率可达97%,时间分辨可达到1.8ns.     

Circuit analysis of the compound quasi-optical power combiner

In 1991, we developed a new type of quasi-optical power combiner, called a compound quasi-optical power combiner, at Ka-band. In this paper, the circuit of such a compound quasi-optical power combiner is analysed. Its equivalent circuit model is proposed. The circuit equations, the balance condition, the injection locking and the stabilized condition of the compound quasi-optical power combiner are studed by the equivalent circuit model. As an example, a compound quasi-optical power combiner which consists of two single—cavity, two—device power combiners is analysed     

Crystallographic report: Bis[bis(N,N‐dibenzyldithiocarbamato)cadmium(II)]

The centrosymmetric structure of {Cd[S₂CN(CH₂Ph)₂]₂}₂ features both bridging and chelating dithiocarbamate ligands so that a square pyramidal S₅ coordination geometry results. Copyright © 2004 John Wiley & Sons, Ltd.     

四阶累积量的MUSIC算法在海流测向中的应用

针对高频地波雷达系统OSMAR2000海流测向中海流元数不易估计的问题，利用四阶谱累积量MUSIC算法的空间谱结构特点，采用试探法确定信号源数并估计信号源的位置．通过对模拟海流和实测数据的处理实验表明，利用该算法可以较准确地估计出海流元的个数和方位，并且比传统MUSIC方法获得更小的角度估计方差，有效地反演了海洋表面流信息．     

加热炉热过程动态操作数学模型

根据加热炉生产特点,建立了钢坯加热过程的动态操作数学模型,分析了待轧时间变化时炉内钢坯温度分布情况。并针对加热炉待轧的灰色性,采用多目标灰色局势决策方法,得出了相应合理的待轧优化控制策略。模拟结果表明:该方法具有良好的动态性能,适合于在线控制。     

A polymer onium acting as phase-transfer catalyst in halogen-exchange fluorination promoted by microwave

A polymerized quaternary ammonium salt polydiallyldimethylammonium chloride, exhibiting high stability to heat and base, was prepared and applied as phase-transfer catalyst (PTC) in halogen-exchange (Halex) fluorination of chloronitrobenzenes to give excellent yields of corresponding fluoronitrobenzenes. Dimethyl sulfoxide was found to be the best solvent when microwave was applied as heating resource.     

Selected-area growth of carbon nanotubes by the combination of focused ion beam and chemical vapor deposition techniques.

In this article, we report a technique for growing carbon nanotubes in a more controllable fashion, which enables us to synthesize nanotubes directly in various forms of designed patterns. This nanofabrication process is based on a combination of focused ion beam (FIB) and chemical vapor deposition (CVD) techniques. In this process, arrays of conductive patterns were first deposited on silicon substrates by directing a gaseous compound (C(9)H(16)Pt) via the capillary needle-sized nozzles within a FIB system. The substrates were then coated with catalyst and further modified by the FIB to localize the position of the catalyst. Finally, the growth of carbon nanotubes on the designed substrates was carried out by CVD of hydrocarbon gases. This fabrication technique has the advantage of positioning carbon nanotubes in selected locations. This may open up opportunities for the direct synthesis of carbon nanotubes onto almost any substrate material, thus allowing fabrication of carbon nanotube-based devices.     

Crystal structure of the clathrate of 5,12-dihydro-5,12-o-benzenonaphthacene-1,4-dione with benzene (2:1).

In the crystal of the title compound, the quinone fragment of the host (1) participates in weak D-A interactions with a neighboring naphthalene moiety of 1 and with the guest molecule via fairly short intermolecular face-to-face contacts. An intermolecular electrostatic interaction between a quinone-oxygen atom and a neighboring quinone ring is suggested by short O...C contacts. There exist several C-H...O hydrogen bonds, one of which seems to contribute to the formation of a centrosymmetric dimer of 1.