Au/Ag复合纳米笼在表面增强拉曼光谱中的应用

表面增强拉曼光谱（SERS）技术是一种基于贵金属纳米结构基底对被检测物进行高灵敏度检测的一种方法.具有特殊纳米结构的贵金属表面受到激光的照射时，金属表面的自由电子会受到极大的振荡，当入射光频率与振荡频率相近时，则会发生表面等离子体共振现象（SPR），使金属表面的局域电场强度极大增强，入射光强度和散射光强度都得到成倍的放大，从而使吸附在贵金属纳米结构表面的分子的拉曼散射信号得到有效的增强.使用NaBH₄还原-酸刻蚀模板法，制备了八面体Au/Ag复合纳米笼，其形貌规整，尺寸均匀约为600 nm，无Cu₂O模板的残留，Au元素均匀负载在Ag纳米笼上，质量分数约为16.8%；Au/Ag复合纳米笼的紫外可见吸收峰相对于Ag纳米笼发生了红移，更重要的是，Au和Ag元素协同赋予了复合纳米笼超高的SERS灵敏度和重复性，Au/Ag复合纳米笼实现了对罗丹明6G的痕量检测（5×10^-14 mol/L），通过时域有限差分法（FDTD）模拟证实：这主要归因于等离子共振作用产生的高电磁场强度；此外，Au元素的加入使Au/Ag复合纳米笼具有优异的抗氧化性和化学稳定性，即使在1%的H₂O₂溶液中浸泡3 h，仍然能够保持优异的SERS性能.八面体Au/Ag复合纳米笼有望成为一种具有应用前景的高灵敏度、高稳定性的SERS基底.     

Development of an indirect competitive ELISA for the determination of papaverine

Papaverine (1-(3,4-dimethoxybenzyl)-6,7-dimethoxyisoquinoline, PAP) is a member of the benzylisoquinoline sub-group of the opium alkaloids. It has been widely used for treating diseases like pulmonary arterial embolism and renal or biliary colic. In this paper, a specific conjugate of mono-demethylated papaverine-O-carboxylmethyl ether (MDMPAP-O-CME) and bovine serum albumin (BSA) was synthesized and used as the complete antigen (PAP-BSA), with which we successfully obtained a high-titer anti-PAP polyclonal antibody (pAb) by immunization of rabbits. The anti-PAP pAb showed high affinity to papaverine with an affinity constant (K_aff) of 7.3 × 10⁷ L/mol. With this antibody, we established a sensitive immunochemical method for the determination of papaverine based on indirect competitive enzyme-linked immunosorbent assay (ELISA). The optimal concentrations of the coated antigen (PAP-OVA) and purified pAb used in the ELISA were 5 and 1.2 μg/mL, respectively. The cross reactivity of other benzylisoquinoline derived substances, including 1-(3,4-dihydroxybenzyl)-7-hydroxy-6-methoxy-isoquinoline (6-methoxy-papaveroline, MPAPO), morphine (MP) and codeine (CD) were all lower than 1%. The linear range of the calibration curve was 0.1-1000 ng/mL. Normal human serum samples were spiked with known amount of papaverine and measured by the ELISA. Recoveries were between 102% and 105%. Papaverine content in a commercial papaverine hydrochloride injection sample was also determined using the established ELISA. Compared with the results given by the control experiment of HPLC, the recoveries of ELISA to detect injection samples were 102-110%. The limits of detection for synthetic serum samples and injection samples of papaverine hydrochloride were 0.25 and 0.06 ng/mL, respectively.     

丙烯环氧化制环氧丙烷Fe-Al-P-O催化剂的研究

用溶胶-凝胶法制得了Fe-Al-P-O催化剂，采用IR、XRD、TEM、BET、TPR和微反等技术研究了催化剂的物化性质和反应性能。实验结果表明，Fe1/2-Al1/2-PO4由10 nm左右 FePO4和AlPO4微晶组合而成，其晶格氧的活泼性大于单纯FePO4，AlPO4在Fe1/2-Al1/2-PO4中起到分散FePO4微晶的作用；Fe1/2-Al1/2-PO4的反应性能与原料气组成密切相关，丙烯与O2的选择氧化产物主要是丙烯醛，原料气中加入H2后，反应产物以环氧丙烷为主，同时还有部分丙烯醛，原料气中引入水蒸气后，可进一步增加环氧丙烷的选择性及减少丙烯醛的产率；在0.1 MPa、200 ℃、C3H6/O2/H2/H2O/N2=1∶1∶1∶1∶6（mol比）和空速1 200 h－1条件下，丙烯的转化率为8.9％，环氧丙烷的选择性为81.0％。     

双8-羟基喹啉端开链冠醚金属络合物的光物理性质

设计合成了双8-羟基喹啉端的开链冠醚QP3Q,研究了金属离子铝或锌与其形成络合物的组成和发光性质,并测定了络合物的激发态寿命.这些络合物在溶液中有较高的荧光量子产率,所得到的络合物固体具有较强的蓝光发光性能.结果表明,有可能通过QP3Q与不同离子形成的络合物得到不同发光波长的发光材料.     

CuO/γ-Al2O3单分散催化剂的XAFS研究

采用XAFS方法研究浸渍法制备并于低温焙烧的CuO/γ-Al2O3催化剂的局域结构.对于CuO负载量小于单层分散阈值的CuO/γ-Al2O3(0.4 mmol/100 m2),结果表明,CuO物种是以层状分散的孤立原子簇存在于γ-Al2O3载体表面,其第一近邻Cu－O配位环境的结构与晶态CuO的相似,键长和配位数分别为0.195 nm和4.对于CuO负载量等于单层分散阈值的CuO/γ-Al2O3(0.8 mmol/100 m2),已有少量的CuO纳米颗粒生成.对于CuO负载量大于单层分散阈值的CuO/γ-Al2O3(1.2 mmol/100 m2),其结构与多晶CuO的相近.基于CuO在γ-Al2O3载体上的三种不同分散状态的结构特点,我们提出了CuO/γ-Al2O3催化剂的结构模型.     

A Novel Dihydroflavone from the Roots of Uvaria Macrophylla

A new dihydroflavone (1), named macrophyllol A, was isolated from the roots of Uvaria macrophylla. Its structure was elucidated on the basis of spectroscopic evidence.     

聚羟基丁酯酯缓释微球的制备及性能

用溶剂蒸发法制备了以新型生物可降解材料聚羟基丁酸酯为载体、以安定为模药的缓释微球,讨论了药物与载体之比对药物含量与包封率的影响,以及制备微球条件对药物释放性能的影响;微球平均粒径为３０～４０μｍ,粒径分布在１～１．５之间,最大载药量为１９．５１％;最高包封率为６７．１１％;体外累积释放曲线呈“两相”释放特征并拌随初始的“突释效应”。扫描电镜观察微球表面呈皱缩表观形态结构,微球内部横断面具有孔道与孔     

含有羧基配体的蝎型钒氧配合物的合成、结构及其热分解动力学

设计合成了两种新型的以聚吡唑硼酸盐、氨基酸为配体的钒氧配合物VO[phCH2CH(NH2)COO][HB(pz)3](1)和VO(3,5-Me2pz)[HB(3,5-Me2pz)3](CH3COO)(2). 通过元素分析、红外光谱对配合物进行了表征, 并利用单晶X射线衍射技术解析了它们的结构. 非等温热分解动力学研究表明, 配合物1和2的热分解反应都是分两步进行的. 通过计算, 配合物1热分解的第一步反应的可能机理为成核与生长(n=1/4); 第二步反应的可能机理为化学反应. 其非等温动力学方程分别为, dα/dT=(A/β)e-E/RT(1/4)(1-α)[-ln(1-α)]-3 和dα/dT=(A/β)e-E/RT(1-α)2. 分解反应的表观活化能分别是223.52 和331.94 kJ·mol-1; 指前因子ln(A/s-1)分别是49.67 和57.50. 配合物2 热分解的第一步反应的可能机理为化学反应; 第二步反应的可能机理为成核与生长(n=1/2). 其非等温动力学方程分别为, dα/dT=(A/β)e-E/RT(1-α)2, 和dα/dT=(A/β)e-E/RT(1/2)(1-α)[-ln(1-α)]-1. 分解反应的表观活化能分别是300.56 和444.72 kJ·mol-1; 指前因子ln(A/s-1)分别是75.53 和92.50.     

Crystalline Morphology and Polymorphic Phase Transitions in Electrospun Nylon 6 Nanofibers

Uniform nylon 6 nanofibers with diameters around 200 nm were prepared by electrospinning. Polymorphic phase transitions and crystal orientation of nylon 6 in unconfined (i.e., as-electrospun) and a high T(g) (340 degrees C) polyimide confined nanofibers were studied. Similar to melt-spun nylon 6 fibers, electrospun nylon 6 nanofibers also exhibited predominant, meta-stable gamma crystalline form, and the gamma-crystal (chain) axes preferentially oriented parallel to the fiber axis. Upon annealing above 150 degrees C, gamma-form crystals gradually melted and recrystallized into the thermodynamically stable alpha-form crystals, which ultimately melted at 220 degrees C. Release of surface tension accompanied this melt-recrystallization process, as revealed by differential scanning calorimetry. For confined nanofibers, both the melt-recrystallization and surface tension release processes were substantially depressed; gamma-form crystals did not melt and recrystallize into alpha-form crystals until 210 degrees C, only 10 degrees C below the T(m) at 220 degrees C. After complete melting of nano-confined crystals at 240 degrees C and recrystallization at 100 degrees C, only alpha-form crystals oriented perpendicular to the nanofiber axis were obtained. In the polyimide-confined nanofibers, the Brill transition (from the monoclinic alpha-form to a high temperature monoclinic form) was observed at 180-190 degrees C, which was at least 20 degrees C higher than that in unconfined nylon 6 at approximately 160 degrees C. This, again, was attributed to the confinement effect.     

新型介孔分子筛KIT-1加氢脱硫催化剂的研究

制备了新型的结构排列无序的介孔分子筛KIT-1和负载Ni, Mo的KIT-1加氢脱硫催化剂。实验结果表明MoO3较易分散在KIT-1的表面,而NiO则容易在其表面形成小晶粒。与以MCM-41和NaY分子筛为载体的Ni, Mo催化剂相比, KIT-1负载催化剂具有较高的加氢脱硫催化活性,因为KIT-1载体具有相互交错的三维孔道结构, 有利于反应物和产物的扩散, 而不容易受孔道堵塞的影响。