Special Mixing Behavior of Chelate-based Ionic Liquid with Methanol

Compared to the general ionic liquids (ILs), a significant deviation of the binary mixtures of 1-decyl-3-methylimidazolium tri(hexafluoroacetylaceto)-copper(II) ([C₁₀mim][Cu(hfacac)₃]) with methanol was found, indicating the way methanol interacts with ILs might be governed by the special structure of the chelating anion. IR results showed that the (C2-H) of 1-decyl-3-methylimidazolium hexafluoroacetylacetonate ([C₁₀mim][hfacac]) blue-shifted more significantly than that of [C₁₀mim][Cu(hfacac)₃], meanwhile the (C=O) red-shifted in [C₁₀mim][Cu(hfacac)₃], which is contrast with that in [C₁₀mim][hfacac]. Two-dimensional correlation analysis of the FTIR spectra indicated that the chelating cavity has little effect on the sequence of the ILs sites that interact with methanol. Combined with small angle X-ray scattering (SAXS) results, the picture of mixing processes in these two systems were proposed. Methanol interacts directly with the anion followed by the cation in [C₁₀mim][hfacac], while methanol preferentially enters the chelating cavity and enhances the packing effect in the [C₁₀mim][Cu(hfacac)₃] system.     

Speciation of inorganic arsenic by electrochemical hydride generation atomic absorption spectrometry

A simple procedure was developed for the speciation of inorganic arsenic by electrochemical hydride generation atomic absorption spectrometry (EcHG–AAS), without pre-reduction of As(V). Glassy carbon was selected as cathode material in the flow cell. An optimum catholyte concentration for simultaneous generation of arsine from As(III) and As(V) was 0.06 mol l⁻¹ H₂SO₄. Under the optimized conditions, adequate sensitivity and difference in ratio of slopes of the calibration curves for As(III) and As(V) can be achieved at the electrolytic currents of 0.6 and 1 A. The speciation of inorganic arsenic can be performed by controlling the electrolytic currents, and the concentration of As(III) and As(V) in the sample can be calculated according to the equations of absorbance additivity obtained at two selected electrolytic currents. The calibration curves were linear up to 50 ng ml⁻¹ for both As(III) and As(V) at 0.6 and 1 A. The detection limits of the method were 0.2 and 0.5 ng ml⁻¹ for As(III) and As(V) at 0.6 A, respectively. The relative standard deviations were of 2.1% for 20 ng ml⁻¹ As(III) and 2.5% for 20 ng ml⁻¹ As(V). The method was validated by the analysis of human hair certified reference material and successfully applied to speciation of soluble inorganic arsenic in Chinese medicine.     

Electrochemical studies of the oxidation mechanism of polyamide on glassy carbon electrode

Polyamides containing N-methyl pyrroles and N-methyl imidazoles are a type of small molecule that can bind and recognize the bases of DNA with high affinity and specificity. Five polyamides were studied at glassy carbon electrode in acetate buffer by cyclic and differential pulse voltammetry to clarify their redox pathways. The polyamide electrochemical responses are compared by peak currents and peak potentials. The slopes of the three anodic E_p vs. pH plots of a typical polyamide are linear and show 0.059, 0.057, 0.056 V per pH in acid media, respectively, which correspond to a mechanism involving the equal number of electrons and protons. A possible mechanism for the redox pathway of various polyamides is proposed: the oxidation product of imidazole ring is acylamide and the results of in situ UV–Vis spectroscopy at Pt web electrode support the proposed mechanism. electrospray ionization mass spectroscopy (ESI-MS) indicates that one or two oxygen atoms are added into polyamide molecule after electrochemical oxidation.     

Influence of the built-in pyridinium salt on asymmetric epoxidation of substituted chromenes catalysed by chiral (pyrrolidine salen)Mn(III) complexes

Chiral (pyrrolidine salen)Mn(III) complexes 1 with an N-benzoyl group and 2 with an N-isonicotinoyl group as well as the corresponding N-methyl (3) and N-benzyl (4) pyridinium salts of 2 were synthesized. The catalytic properties of 1–4 and 2 with excess CH₃I were explored to figure out the influence of the internal pyridinium salt in the catalyst on asymmetric epoxidation of substituted chromenes with NaClO/PPNO as an oxidant system in the aqueous/organic biphasic medium. The (pyrrolidine salen)Mn(III) complexes with an internal pyridinium salt, either formed in situ or isolated, displayed higher activities than analogous complexes 1, 2 and Jacobsen's catalyst in the aforementioned reaction, with comparable high yields and ee values. The acceleration of the reaction rate is attributed to the phase transfer capability of the built-in pyridinium salt of the (salen)Mn(III) catalyst. The effect of the internal pyridinium salt on the epoxidation of substituted chromenes is similar to that of the external pyridinium salts and ammonium halides.     

新型四硫代富瓦烯衍生物的合成及其性质的研究

合成了3个新的含有卤素取代基的四硫代富瓦烯衍生物及6个新的相关化合物。利用溶液的电子吸收光谱对四硫代富瓦烯衍生物的性质进行了研究。研究结果表明, 四硫代富瓦烯衍生物的分子中π轨道之间的能级差较小, 因而分子具有较高的稳定性。     

超高效液相色谱-四极杆/静电场轨道阱高分辨质谱快速筛查染发剂中32种染料成分

建立了超高效液相色谱-四极杆/静电场轨道阱高分辨质谱快速筛查和分析染发剂中32种禁限用染料的分析方法。样品经甲醇-2 g/L抗坏血酸水溶液溶解提取,正己烷净化,用ZORBAX Eclipse Plus C_(18)(3.0 mm×100 mm,1.8μm)色谱柱分离,以甲醇-5 mmol/L乙酸铵水溶液为流动相进行梯度洗脱,采用正、负离子切换同时测定了32种染料成分,显著提高了检测通量。以全扫描模式下提取的保留时间和一级母离子精确质量数以及同位素丰度比,实现对染发剂中多种染料成分的快速筛查;以自动触发采集的二级碎片离子精确质量数进行确证。32种染料在相应的质量浓度范围内线性关系良好,相关系数(r~2)均大于0.99;定量下限(LOQ)为0.2～40μg/g,回收率为81.0%～110%,相对标准偏差(RSD)为3.3%～9.9%。该方法简单、准确、快速,适用于染发剂中多种禁限用染料成分的高通量快速定性筛查和定量分析。     

基于SnO2为修饰层的Au-Pt / SnO2 / Au复合电极研究

用真空镀膜法在Au电极上沉积SnO₂薄膜，在HAuCl₄和H₂PtCl₄的混合溶液中利用直接还原法，将Au-Pt双金属纳米颗粒组装在SnO₂ / Au电极上，得到Au-Pt / SnO₂ / Au复合电极。采用SEM、TEM、XPS及CV曲线测定对Au-Pt / SnO₂ / Au复合电极进行了表征。结果表明:复合电极上双金属纳米颗粒分布均匀，粒子粒径约为25 nm左右。SnO₂作为修饰层以配位键与双金属纳米粒子结合。Au-Pt / SnO₂ / Au复合电极具有良好对甲醇氧化的电化学性能。     

Stannous oxalate as a novel catalyst for the synthesis of polytrimethylene terephthalate

Stannous oxalate was prepared efficiently and characterized by XRD and FT-IR. It exhibited higher catalytic activity and had profitable effect than tetrabutyl titanate and stannous octoate for the synthesis of polytrimethylene terephthalate (PTT) via esterification-route. Over this catalyst, the degree of esterification of pure terephthalic acid was up to 94.4% at 260°C after 1.5 h, while the intrinsic viscosity and content of terminal carboxyl groups of the corresponding PTT polyester, polymerized at 260°C, 60 Pa for 2 h, was 0.8950 dL/g and 15 mol/t, respectively. Stannous oxalate was a promising catalyst for the synthesis of PTT polyester.     

微波等离子体炬发射光谱法去溶系统性能的研究

用微波等离子体矩（MPT）作激发光源，等离子体的工作气体为氩气，研究了气动雾化进样去溶系统的工作参数对分析性能的影响，探讨了水冷凝与浓硫酸吸收二者协同去溶的相关性，结果表明，OH （Q1带，带头谱线为308.520nm）的发射强度即可判别样品去溶效果。     

Synthesis of a digermane-containing tricylic nonadecadienedione incorporating an equivalent of ring-opened THF

The combination of 2 equiv of bis[bis(trimethylsilyl)amide]germylene (5) with 2 equiv of 4-phenyl-1,2,4-triazoline-3,5-dione (PTAD) in tetrahydrofuran (THF) results in the ring-opening of 1 equiv of THF to form 2,2,8,8-tetrakis(1,1,1,3,3,3-hexamethyl-disilazan-2-yl)-5,16-diphenyl-7,9,14-trioxa-1,3,5,16,18,19-hexaaza-2,8-digerma-tricyclo[13.2.1.13,6]nonadeca-6(19),15(18)-diene-4,17-dione (6). This fast and nearly quantitative reaction builds a 15-membered ring from five different molecules. The new ring, structurally assigned by X-ray crystallography, contains a flexible methylene chain that moves rapidly on the NMR time scale.