Dual-Color Quantum Dot–Encoded Nanoprobe for DNA Assays and Cell Imaging

In this article, a novel dual-color quantum dot–encoded fluorescent nanoprobe was prepared by the reverse microemulsion method and layer-by-layer assembly method. First, red fluorescence–emitting CdTe quantum dots were encapsulated in silica nanoparticles by the reverse microemulsion method. Yellow fluorescence–emitting quantum dots were deposited on the surface of silica nanoparticles to form a dual-color quantum dot@silica beads/quantum dot nanoprobe. Then capture DNA was linked to a QSQ nanoprobe via covalent bonding. We utilized the quantum dot@silica beads/quantum dot nanoprobe to capture and detect the mutant BRAF DNA sequence through the competitive immunoassay method. The resulting quantum dot@silica beads/quantum dot nanoprobe-capture DNA conjugates showed sequence-specific hybridization with target DNA. Furthermore, a multispectral imaging system was utilized to distinguish the quantum dot optical code in the quantum dot@silica beads/quantum dot nanoprobe. The quantum dot@silica beads/quantum dot nanoprobe was used in human osteoblast-like HepG2 cell imaging. The proposed quantum dot@silica beads/quantum dot nanoprobe and decoding analysis method could be used for targeting imaging, biological assays, and early detection of cancer.     

α，α‘—二氧代烯酮环二硫代缩酮类化合物的特征红外光谱（Ⅲ）

研究了5种α,α‘-二氧代烯酮环二硫代缩酮类化合物的碳基、碳碳双键、碳硫等一些特征红外光谱,尤其着重研究了共轭体系下的各种特征谱带随化学结构而变化的规律。     

不同入射角度下强流脉冲电子束能量沉积剖面和束流传输系数模拟计算

 强流脉冲电子束在材料中的能量沉积剖面、能量沉积系数和束流传输系数受其入射角的影响很大，理论计算了0.5~2.0MeV的电子束以不同的入射角在Al材料中的能量沉积剖面和能量沉积系数，并且还计算了0.4~1.4MeV电子束以不同入射角穿透不同厚度C靶的束流传输系数。计算结果表明，随着入射角的增大，靶材表面层单位质量中沉积的能量增大，电子在靶材料中穿透深度减小，能量沉积系数减小，相应的束流传输系数也减小；能量为0.5~2.0MeV的电子束当入射角在60°~70°时在材料表面层单位质量中沉积的能量较大。     

原卟啉原IX的构象分析

在合理药物设计方法中 ,当靶标酶的三维结构未知时 ,对其底物进行构象分析 ,特别是确定其活性构象 ,对阐明靶标酶活性中心的空间形状和作用位点具有十分重要的意义。我们曾利用距离比较法确定了原卟啉原氧化酶的底物—原卟啉原IX的活性构象 ,本文从构象分析的角度对 4种不同构象的原卟啉原IX分子与二苯醚类分子的晶体学构象进行了几何参数的比较和分析 ,结果进一步证实了距离比较法所确定的活性构象更为可靠     

Synthesis of (‐)‐herbertenediol and (aR,aS)‐mastigophorenes A via asymmetric intramolecular heck coupling reaction

Total enantioselective synthesis of the natural (‐)‐Herbertenediol (1) was accomplished in eleven steps with an overall yield of 15% starting from the 2‐methoxy‐4‐methyl‐phenol. The total synthesis features asymmetric intramolecular Heck reaction and Wolff‐Kishner‐Huang reduction. (aR, aS)‐Mastigophorenes A was also synthesized through the oxidative coupling reaction.     

Al and Ti secondary neutral and secondary ion emission from oxide samples in the high-frequency sputtering mode of HF-plasma SNMS

A strong Al⁺ and a minor Ti⁺ peak without a proportional increase of the O⁺ signal in SNMS high-frequency sputtering mode (HFM) time profiles of an insulating μm-thick oxide layer on Ti-48Al-2Cr-2Nb led us to check for a possible contribution of positive secondary ions (SI⁺). SI⁺ and SI^– (negative secondary ions) can be detected in ion energy spectra. This is shown using Al⁺, O^–, AlO^–, and AlO₂ ^– ions sputtered from massive Al₂O₃. Similarly, and depending on stoichiometry, also Ti⁺ from mixed sintered, microscopically inhomogeneous Al₂O₃-TiO₂-SiO₂ pellets has been identified to be partly SI⁺. The subtraction of an assumed contribution of ionized secondary neutrals (SN⁺) suggests that SI⁺ may form several 10% of the detected ions obtained in the HFM sputtering and plasma processes. However, the positive surface potential of some 10 V being necessary to cause detectable SI⁺ contributions does not build up on μm-thin insulating layers. Therefore, we have to conclude that the Al⁺ and Ti⁺ peaks in the sputter time profiles of the μm-thick oxide layer on Ti-48Al-2Cr-2Nb which are accompanied by an O⁺ deficiency cannot have been caused by SI⁺. Instead, their more probable origin is the inhomogeneous Al₂O₃ interlayer itself. Together with the residues of a topmost TiO₂ layer which has strongly been depleted in O by preferential sputtering, the relative O⁺ deficiency may be explained without assuming SI⁺ contributions. Received: 22 February 1999 / Revised: 1 July 1999 / Accepted: 6 July 1999     

Continuous flow metal-free oxidation of picolines using air

The metal free, direct oxidation of 2-, 3-, and 4-picoline to the corresponding carboxylic acid using either oxygen or air has been developed under continuous flow conditions. Complete conversion for all three substrates was obtained at moderate temperatures and pressures within minutes.     

Amperometric NADH Biosensor Based on Magnetic Chitosan Microspheres/Poly(thionine) Modified Glassy Carbon Electrode

Novel magnetic chitosan‐coated microspheres (MCMSs) were prepared by modifying carbon‐coated iron magnetic nanoparticles with chitosan. An amperometric dihydronicotinamide adenine dinucleotide (NADH) sensor was constructed based on immobilizing MCMS on the surface of a polythionine (PTH) modified glassy carbon electrode (GCE). The fabrication of MCMS/PTH film and its electrocatalytic effect on electrochemical oxidation of NADH were investigated by electrochemical impedance spectroscopy (EIS) and voltammetric methods. It was found that the resulting integrated films of PTH and MCMS exhibit high electrocatalytic response to NADH by significantly reduce its overpotential. The effects of the experimental variables on the amperometric determination of NADH such as solution pH and working potential were investigated for optimum analytical performance. This electrochemical sensor had a fast response to NADH which was less than 10 s. Linear response ranges of 2–10 μM and 10–100 μM and a detection limit of 0.51 μM (S/N=3) were obtained under the optimum conditions. Moreover, the selectivity, stability and reproducibility of this biosensor was evaluated with satisfactory results.