Two-photon absorption enhancement of polymer-templated porphyrin-based J-aggregates

Supramolecular structures based on organized assemblies of macrocyclic chromophores, particularly porphyrin-based dyes, have attracted widespread interest as components of molecular devices with potential applications in molecular electronics, artificial light harvesting, and pharmacology. We report the formation of J-aggregates of two porphyrin-based dyes, 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin (TSPP, 4) and an amino tris-sulfonate analogue (5) in water using a functionalized norbornene-based homopolymer, synthesized by ring-opening metathesis polymerization (ROMP). Ionic interactions of the cationic side chains (ammonium groups) of the polymer under acidic conditions with the negatively charged sulfonate groups of the porphyrins facilitated polymer template enhanced J-aggregation of the porphyrin dyes. J-Aggregation behavior was investigated photophysically by UV-vis absorption along with steady-state and time-resolved fluorescence studies. Two-photon absorption (2PA) was enhanced by about an order of magnitude for the J-aggregated TSPP relative to its free base. Significantly, the 2PA cross section of the polymer-templated TSPP J-aggregate was up to three times higher than the J-aggregated TSPP in the absence of the polymer template while the 2PA cross section for polymer-templated J-aggregates of 5 increased substantially, up to ca. 10,000 GM, suggesting a prominent role of polymer-templating to facilitate porphyrin aggregation and greatly enhance nonlinear absorption.     

Two-photon fluorescence microscopy imaging of cellular oxidative stress using profluorescent nitroxides

A range of varying chromophore nitroxide free radicals and their nonradical methoxyamine analogues were synthesized and their linear photophysical properties examined. The presence of the proximate free radical masks the chromophore's usual fluorescence emission, and these species are described as profluorescent. Two nitroxides incorporating anthracene and fluorescein chromophores (compounds 7 and 19, respectively) exhibited two-photon absorption (2PA) cross sections of approximately 400 G.M. when excited at wavelengths greater than 800 nm. Both of these profluorescent nitroxides demonstrated low cytotoxicity toward Chinese hamster ovary (CHO) cells. Imaging colocalization experiments with the commercially available CellROX Deep Red oxidative stress monitor demonstrated good cellular uptake of the nitroxide probes. Sensitivity of the nitroxide probes to H(2)O(2)-induced damage was also demonstrated by both one- and two-photon fluorescence microscopy. These profluorescent nitroxide probes are potentially powerful tools for imaging oxidative stress in biological systems, and they essentially "light up" in the presence of certain species generated from oxidative stress. The high ratio of the fluorescence quantum yield between the profluorescent nitroxide species and their nonradical adducts provides the sensitivity required for measuring a range of cellular redox environments. Furthermore, their reasonable 2PA cross sections provide for the option of using two-photon fluorescence microscopy, which circumvents commonly encountered disadvantages associated with one-photon imaging such as photobleaching and poor tissue penetration.     

Polyatomic anion versus acetonitrile in coordinating ability: structural properties of AgX-bearing 1,4-bis(2-isonicotinoyloxyethyl)piperazine (X??=?NO3?, CF3SO3?, ClO4?, BF4?, and PF6?)

Type studies on competitive polyatomic anion versus acetonitrile coordination in the self-assembly of a series of [Ag₂(X) _m (bip)(NCCH₃) _n ](X)_2−m (X⁻ = NO₃ ⁻, CF₃SO₃ ⁻, ClO₄ ⁻, BF₄ ⁻, and PF₆ ⁻; m = 0, 2; n = 0, 2, 4; bip = 1,4-bis(2-isonicotinoyloxyethyl)piperazine) were carried out. Each bip spacer acts as an N₄ tetradentate ligand and is linked to four silver(I) centers through two pyridine and two piperazine moieties, producing a double strand consisting of two 20-membered ring units. The coordinating environment around the silver(I) center is subtly determined by the competition of the polyatomic anions with acetonitrile, that is, by the Ag···NCCH₃ versus Ag···X interactions. The coordinating ability of acetonitrile is inversely proportional to the order of the coordination ability of the Hoffmeister series of polyatomic anions, NO₃ ⁻ ≫ CF₃SO₃ ⁻ > ClO₄ ⁻ > BF₄ ⁻ ≫ PF₆ ⁻.     

Anti-adipogenic activity of Cordyceps militaris in 3T3-L1 cells

Inhibition of adipocytes differentiation is suggested to be an important strategy for prevention and/or treatment of obesity. In our present study, Cordyceps militaris showed significant inhibitory activity on adipocyte differentiation in 3T3-L1 preadipocytes as assessed by measuring fat accumulation using Oil Red O staining. Activity-guided fractionation led to the isolation of cordycepin (1), guanosine (2) and tryptophan (3) as active compounds. All the three compounds were more effective in the prevention of early stage of adipogenesis than in lipolysis. In addition, combinational treatment of three compounds significantly increased anti-adipogenic activity.     

Quantitation of surface-bound proteins on biochips using MALDI-TOF MS

We report on a novel method for the quantitation of proteins specifically bound on a ligand-presenting biochip by matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry (MS). The bound protein was digested by trypsin, and the resulting peptide fragments were analyzed by MALDI-TOF MS in the presence of an isotope-labeled internal standard (IS). The IS has the same sequence as a reference peptide (RP) of the target protein digest, but a different molecular weight. The absolute amount of the specifically bound protein on a biochip is then quantitated by comparison of mass intensities between the RP and the IS. Because they have the same molecular milieu, the mass intensities of these two analytes represent the real amounts of analytes on the chip. As a model system, we tested glutathione s-transferase (GST) and a GST-fusion protein, which were captured on glutathione-presenting biochips. We observed that the glutathione densities on biochips showed a good correlation with the absolute quantity of the proteins. We believe that our method will provide an alternative to currently existing tools for the absolute quantitation of surface-bound proteins.     

A New Numerical Method for Accurate Simulation of Fast Cyclic Adsorption Processes

In the simulation of fast cyclic adsorption processes, to apply the Fickian diffusion model it is necessary to include an increasing number of numerical discretization points as the cycle time is reduced in comparison to the characteristic diffusional time constant. We propose a new numerical method based on the definition of two distinct regions within an adsorbent particle: an outer layer where the concentration varies significantly with large internal gradients leading to enhanced mass fluxes, and an internal region where the concentration profile is virtually flat. The proposed method leads to the automated generation of a numerical grid that has a constant number of elements independent of the process cycle time. The procedure is demonstrated on a model for the simulation of a heatless dryer pressure swing adsorption process.     

Excitation-energy migration in self-assembled cyclic zinc(II)-porphyrin arrays: a close mimicry of a natural light-harvesting system

The excitation-energy-hopping (EEH) times within two-dimensional cyclic zinc(II)-porphyrin arrays 5 and 6, which were prepared by intermolecular coordination and ring-closing metathesis reaction of olefins, were deduced by modeling the EEH process based on the anisotropy depolarization as well as the exciton-exciton annihilation dynamics. Assuming the number of energy-hopping sites N = 5 and 6, the two different experimental observables, that is, anisotropy depolarization and exciton-excition annihilation times, consistently give the EEH times of 8.0 +/- 0.5 and 5.3 +/- 0.6 ps through the 1,3-phenylene linkages of 5 and 6, respectively. Accordingly, the self-assembled cyclic porphyrin arrays have proven to be well-defined two-dimensional models for natural light-harvesting complexes.     

A rapid polyol combustion strategy towards scalable synthesis of nanostructured LiFePO4/C cathodes for Li-ion batteries

In the present study, carbon-coated lithium iron phosphate (LiFePO₄/C) is prepared directly by a polyol-assisted pyro-synthesis performed under reaction times of a few seconds in open-air conditions. The polyol solvent, tetraethylene glycol (TTEG), acts as a low-cost fuel to facilitate combustion and the released exothermic energy promotes the nucleation and growth processes of the olivine nanoparticles. In addition, phosphoric acid (used as the phosphorous source) acts as a catalyst to accelerate polyol carbonization. The structure analysis of the as-prepared LiFePO₄/C using X-ray, neutron diffraction and ⁷Li NMR studies suggested the efficacy of the rapid technique to produce highly crystalline phase-pure olivine nanocrystals. The electron microscopy and particle-size distribution studies revealed that the average particle diameters lie below 100 nm and confirmed the presence of a surface carbon layer of 2–3 nm thickness. The thermal and elemental studies indicated that the carbon content in the sample was approximately 5 %. The prepared LiFePO₄/C cathode delivered capacities of 162 mA h g^-1 at 0.1 °C rates with impressive capacity retention for extended cycling. The polyol-assisted pyro-synthesis, which evades the use of external energy sources, is not only a straightforward, simple and timely approach but also offers opportunities for large-scale LiFePO₄/C production.     

The influence of alkaline reserve on the aging behavior of book papers

Degradation of cellulose under alkaline conditions is involved either involuntarily or deliberately in many different cellulose processing steps, such as pulping, bleaching, or aging within the viscose process, and the underlying chemistry has been the topic of numerous studies. When it comes to aging under alkaline conditions—either natural or accelerated (artificial)—the degradation processes are by far less investigated and understood. A prominent example of moderately alkaline cellulosic material is deacidified book paper from libraries which had undergone a mass-deacidification treatment. We studied their aging behavior under accelerated conditions in comparison to non-deacidified duplicates in order to better understand how the alkaline reserve, which was introduced by the deacidification treatment, affects the stability of the books on the long run. GPC analysis of cellulose and determination of carbonyl functionalities were performed, which were critical parameters to achieve a deeper insight into hydrolytic and oxidative changes of cellulose structure upon deacidification treatment and subsequent aging. Also, model book papers impregnated with different amounts of alkaline reserve were used to support the findings from the original book samples. Hydrolytic degradation rates of the original book papers were significantly reduced after mass deacidification compared to the non-deacidified duplicates. The beneficial effect of mass deacidification on cellulose stability was found to be strongly related to the amount of alkaline reserve deposited, independent of varying parameters of book papers. Although some indication of alkali-induced β-elimination was found (a minor decrease of the along-chain carbonyl content in the original deacidified book papers during aging), it did not occur to an extent that significantly influenced the molar mass of cellulose. The beneficial effect of retarded hydrolytic degradation by mass deacidification thus clearly outweighed possible negative alkalinity effects of the deposited alkaline reserve.