Conformationally resolved structures of jet-cooled acetaminophen by UV-UV hole-burning spectroscopy

The conformational structures of jet-cooled acetaminophen were investigated in the gas phase by resonant 2-photon ionization and UV-UV hole-burning spectroscopy. In contrast to the results from a previous study, two nearly isoenergetic conformers were distinctly found in a supersonic molecular beam expansion and positively identified as the cis and trans isomers of acetaminophen by UV-UV hole-burning spectroscopy. The 0-0 bands of the cis and trans isomers were found at 33518.7 and 33485.6 cm(-1), respectively. The vibronic bands of the two isomers are close-lying and/or partially overlapping due to the small energy difference (33 cm(-1)) between the two 0-0 bands. As a consequence, the recorded resonant 2-photon ionization spectrum is highly congested in the low excitation energy region, which develops continuously into a featureless, broadened spectrum in the high energy region.     

Anti-adipogenic activity of Cordyceps militaris in 3T3-L1 cells

Inhibition of adipocytes differentiation is suggested to be an important strategy for prevention and/or treatment of obesity. In our present study, Cordyceps militaris showed significant inhibitory activity on adipocyte differentiation in 3T3-L1 preadipocytes as assessed by measuring fat accumulation using Oil Red O staining. Activity-guided fractionation led to the isolation of cordycepin (1), guanosine (2) and tryptophan (3) as active compounds. All the three compounds were more effective in the prevention of early stage of adipogenesis than in lipolysis. In addition, combinational treatment of three compounds significantly increased anti-adipogenic activity.     

Strain stiffening of non-colloidal hard sphere suspensions dispersed in Newtonian fluid near liquid-and-crystal coexistence region

Concentrated hard sphere suspensions often show an interesting nonlinear behavior, called strain stiffening, in which the viscosity or modulus starts to increase at critical strain amplitude. Sudden increase of rheological properties is similar to shear thickening; however, the particle dynamics in the strain stiffening under oscillatory shear flow does not necessarily coincide with the mechanism of shear thickening under step shear flow. In this study, we have systematically investigated the nonlinear rheology of non-colloidal (>1???m) hard sphere suspensions dispersed in Newtonian fluid near liquid-and-crystal coexistence region in order to better understand the strain stiffening behavior. The suspensions near liquid-and-crystal coexistence region are known to locally form the closed packing structure. The critical strain amplitude which is the onset of strain stiffening was different for the storage and loss modulus. But they converged to each other as the suspension forms a more crystalline structure. The critical strain amplitude was independent of medium viscosity, imposed angular frequency, and particle size, but was strongly dependent upon particle volume fraction. The onset of strain stiffening was explained in terms of shear-induced collision due to particle motion in the closed packing structure. Nonlinear stress wave-forms, which reflect the micro-structural change, were observed with the onset of strain stiffening. During the strain stiffening, enhanced elastic stress before and after flow reversal was observed which originates from changes in the suspension microstructure. Nonlinearity of the shear stress in terms of Fourier intensity was extremely increased up to 0.55. Beyond the strain stiffening, the suspension responded liquid-like and the nonlinearity decreased but the elastic shear stress was still indicating the microstructure rearrangement within a cycle.     

Gas-phase and catalytic combustion in heat-recirculating burners

An experimental study of a spiral counterflow “Swiss roll” burner was conducted, with emphasis on the determination of extinction limits and comparison of results with and without bare-metal Pt catalyst. A wide range of Reynolds numbers (Re) were tested using propane–air mixtures. Both lean and rich extinction limits were extended with the catalyst, though rich limits were extended much further. With the catalyst, combustion could be sustained at Re as low as 1.2 with peak temperatures as low as 350 K. A heat transfer parameter characterizing the thermal performance of both gas-phase and catalytic combustion at all Re was identified. At low Re, the “lean” extinction limit was actually rich of stoichiometric, and rich-limit had equivalence ratios exceeded 40 in some cases. No corresponding behavior was observed without the catalyst. Gas-phase combustion, in general, occurred in a “flameless” mode near the burner center. With or without catalyst, for sufficiently robust conditions (high Re, near-stoichiometric) not requiring heat recirculation, a visible flame would propagate out of the center, but this flame could only be re-centered if the catalyst were present. Gas chromatography indicated that at low Re, even in extremely rich mixtures, CO and non-propane hydrocarbons did not form. For higher Re, where both gas-phase and catalytic combustion could occur, catalytic limits were slightly broader but had much lower limit temperatures. At sufficiently high Re, catalytic and gas-phase limits merged. It is concluded that combustion at low Re in heat-recirculating burners greatly benefits from catalytic combustion with the proper choice of mixtures that are different from those preferred for gas-phase combustion. In particular, the importance of providing a reducing environment for the catalyst to enhance O₂ desorption, especially at low Re where heat losses are severe thus peak temperatures are low, is noted.     

Studies on the E7 liquid crystal orientations confined to perfluorinated carboxylic acid-treated cylindrical cavities of Anodisc membranes by FTIR spectroscopy

The orientation of E7 liquid crystal (LC) confined within 200 nm diameter cylindrical cavities of Anodisc membranes are investigated by FTIR dichroism techniques. The cavity walls of the confining pores were chemically modified with different length perfluorinated carboxylic acids (PCAs, C _n F_2n+1COOH, n = 3, 4, 5, 6) at 1, 3 and 5 mM concentrations. From the FTIR spectra of PCA-treated alumina Anodsic membranes, we found salt formation between the -COOH group of the PCAs and the Anodisc membranes. From the FTIR spectra of LC-filled Anodisc membranes, we found an abrupt alignment direction change, from parallel to perpendicular, of the LC molecules along the long axis of the cavities between n = 4 and n = 5 for the 1 mM concentration of PCA. However, for the 5 mM concentration of PCA, the parallel-to-perpendicular alignment direction of LC molecules changed between n = 3 and n = 4. These LC orientation changes for PCA-treated Anodisc membranes occurred at shorter length than for hydrocarbon carboxylic acid (HCA, C _n H_2n+1COOH)-treated Anodisc membranes. This change may be caused by the lower surface energy of the -(CF₂) _n CF₃ chain of PCA than that of the -(CH₂) _n CH₃ chain of HCA.     

Generic initial ideals of Artinian ideals having Lefschetz properties or the strong Stanley property

For a standard Artinian k-algebra A=R/I, we give equivalent conditions for A to have the weak (or strong) Lefschetz property or the strong Stanley property in terms of the minimal system of generators of gin(I). Using the equivalent condition for the weak Lefschetz property, we show that some graded Betti numbers of gin(I) are determined just by the Hilbert function of I if A has the weak Lefschetz property. Furthermore, for the case that A is a standard Artinian k-algebra of codimension 3, we show that every graded Betti number of gin(I) is determined by the graded Betti numbers of I if A has the weak Lefschetz property. And if A has the strong Lefschetz (respectively Stanley) property, then we show that the minimal system of generators of gin(I) is determined by the graded Betti numbers (respectively by the Hilbert function) of I.     

White electroluminescence from a single polyfluorene containing bis‐DCM units

A series of fluorene‐based copolymers composed of blue‐ and orange‐light‐emitting comonomers were synthesized through palladium‐catalyzed Suzuki coupling reactions. 9,9‐Dihexylfluorene and 2‐(2,6‐bis‐{2‐[1‐(9,9‐dihexyl‐9H‐fluoren‐2‐yl)‐1,2,3,4‐tetrahydroquinolin‐6‐yl]‐vinyl}‐pyran‐4‐ylidene)‐malononitrile (DCMF) were used as the blue‐ and orange‐light‐emitting chromophores, respectively. The resulting single polymers exhibited simultaneous blue (423/450 nm) and orange (580–600 nm) emissions from these two chromophores. By adjusting the fluorene and DCMF contents, white light emission could be obtained from a single polymer; a device with an ITO/PEDOT:PSS/polymer/Ca/Al configuration was found to exhibit pure white electroluminescence with Commission Internationale de L'Eclairage (CIE) coordinates of (0.33, 0.31), a maximum brightness of 1180 cd/m², and a current efficiency of 0.60 cd/A. Furthermore, the white light emission of this device was found to be very stable with respect to variation of the driving voltage. The CIE coordinates of the device were (0.32, 0.29), (0.32, 0.29), and (0.33, 0.31) for driving voltages of 7, 8, and 10 V, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3380–3390, 2007     

Simple, Rapid, and Sensitive Determination of Odorous Compounds in Water by GC–MS

A gas chromatographic–mass spectrometric method has been developed for rapid and sensitive determination of odorous compounds in water. The water sample (200 mL), at pH 6.5, was extracted with 1 mL pentane in a 250-mL separatory funnel. Fluorobenzene was added to the water sample as internal standard and the solution was mechanically shaken for 5 min and analyzed by GC–MS, with selected ion monitoring, without further concentration or purification steps. The peaks had good chromatographic properties and extraction of the compounds from water resulted in relatively high recoveries with small variations. The detection limits of the assay were 0.1 ng L^–1 for 2-isopropyl-3-methoxypyrazine, 2-isobutyl-3-methoxypyrazine, 2-methylisoborneol, and geosmin, 0.5 ng L^–1 for anisole, and 1.0 ng L^–1 for 2,4,6-trichloroanisole and trans, trans-2,4-heptadienal. Turn-around time was one day for up to approximately 40 samples. The method is simple, convenient, and can be learned easily by relatively inexperienced personnel. It was used to analyze seven odorous compounds in water from Decheung-Lake in Korea, and raw and treated water originating from the same lake. In the summer of 2001 significant levels of anisole (up to 225 ng L^–1) were observed, and geosmin and 2-methylisoborneol were detected at concentrations of up to 23.8 and 26.7 ng L^–1, respectively. 2-Isopropyl-3-methoxypyrazine, 2-isobutyl-3-methoxypyrazine, and trans, trans-2,4-heptadienal levels during that period were not significant. The method can used for simultaneous detection of several odorous compounds in water.     

Essay: A New Era in High-Energy Physics

In TeV-scale gravity, scattering of particles with center-of-mass energy of the order of a few TeV can lead to the creation of nonperturbative, extended, higher-dimensional gravitational objects: Branes. Neutral or charged, spinning or spinless, Einsteinian or supersymmetric, low-energy branes could dramatically change our picture of high-energy physics. Will we create branes in future particle colliders, observe them from ultra high energy cosmic rays, and discover them to be dark matter?