Ascorbic acid as a potential masking agent in the tanning process. Olated chromium complexes involving ligating ascorbate and bridging sulfate groups

Two polynuclear complexes, a dimer and a tetramer, involving sulfate and hydroxo bridges and ligating ascorbate were isolated from aqueous solutions. Structural formulae are proposed on the basis of microanalytical and thermal analysis results, i.r., ¹³C-n.m.r., mass spectral data and magnetic measurements.     

Surface Characterization of Sepiolite by Inverse Gas Chromatography

Inverse gas chromatography (IGC) was applied to characterize the surface of sepiolite. The adsorption thermodynamic parameters (the standard enthalpy (ΔH ⁰), entropy (ΔS ⁰) and free energy of adsorption (ΔG ⁰)), the dispersive component of the surface energy (γ _S ^d ), and the acid/base character of sepiolite surface were estimated by using the retention time of different non-polar and polar probes at infinite dilution region. The specific free energy of adsorption (ΔG ^sp ), the specific enthalpy of adsorption (ΔH ^sp ), and the specific entropy of adsorption (ΔS ^sp ) of polar probes on sepiolite were determined. ΔH ^sp were correlated with the donor and modified acceptor numbers of the probes to quantify the acidic K _A and the basic K _D parameters of the sepiolite surface. The values obtained for the parameters K _A and K _D indicated an acidic character for sepiolite surface.     

Oxygen/nitrogen ordering in lanthanum new phase (La3Si8N11O4)

High-resolution ¹⁷O NMR spectra have been collected for crystalline samples of lanthanum new phase, La₃Si₈N₁₁O₄. In conjunction with previously published ²⁹Si and ¹⁵N spectra obtained for this phase, and in the light of the high-quality crystal structure data reported recently, a more detailed interpretation of the NMR spectra is presented than was possible in previous studies. The non-bridging oxygens in the structure are responsible for the single sharp peak seen in the ¹⁷O spectrum at 188 ppm; the remaining oxygens, occupying bridging sites shared with nitrogen, show up only weakly on the ¹⁷O spectrum as a broad diffuse band centered around zero ppm. The peak at −57.3 ppm on the ²⁹Si spectrum is believed to correspond to an overlap of [SiN₄] and [SiON₃] environments, with the −68.2 ppm peak corresponding to an [SiO₂N₂] environment.     

Novel dye-attached macroporous films for cadmium, zinc and lead sorption: Alkali Blue 6B-attached macroporous poly(2-hydroxyethyl methacrylate)

Alkali Blue 6B-attached poly(2-hydroxyethyl methacrylate) (poly(HEMA)) microporous films were investigated as chelate forming sorbents for heavy metal removal. Poly(HEMA) microporous films were prepared by UV-initiated photo-polymerization of HEMA in the presence of an initiator (azobisisobutyronitrile (AIBN)). Alkali Blue 6B was attached covalently. These films with a swelling ratio of 58%, and carrying 14.8 mmol Alkali Blue 6B m(-2) which were then used in the removal of Cd(II), Zn(II) and Pb(II) from aqueous media. Adsorption rates were very high, equilibrium was achieved in about 30 min. The maximum adsorption of heavy metal ions onto the Alkali Blue 6B-attached films were 41.4 mmol m(-2) for Cd(II), 52.4 mmol m(-2) for Zn(II), and 64.5 mmol m(-2) for Pb(II). When the heavy metal ions competed during the adsorption from a mixture the adsorption values for Cd(II), Zn(II) and Pb(II) were quite close. Heavy metal ions were desorbed by using 0.1 M HNO(3). A significant amount of the adsorbed heavy metal ions (up to 95%) could be desorbed in 30 min. Repeated adsorption/desorption cycles showed the feasibility of these novel dye-attached microporous films for heavy metal removal.     

Observations on clear solution silicalite-1 growth by nanoslabs

Several research groups have reported the presence of nanometer-sized particles (nanoslabs) in clear solutions, which precipitate the crystalline MFI (ZSM-5) structure. Debate about the growth mechanism for Al-free ZSM-5 (silicalite-1) has revolved around growth by small silicate units (monomers, dimers, etc.) from solution vs growth by nanoslab addition. A model developed for precipitation of uniform sized colloids by addition of sub-colloidal precursor units has been adapted for this zeolite synthesis system. Parameter values were adjusted for the simulation results to match experimental observations from work reported previously, at least to the extent possible. The model involved the simultaneous solution of up to 6000 ordinary differential equations, and required computation times of up to 24 h. The results shed light on the crystal growth mechanism, but pose questions for further investigations of the nucleation mechanism.     

Three-dimensional self-assembly of metallic rods with submicron diameters using magnetic interactions

Metallic rods with submicron diameters that contain disklike ferromagnetic sections self-assemble into highly stable, hexagonally close-packed arrays of rods. The rods were fabricated by electrodeposition in porous alumina membranes and comprised alternating sections of gold and nickel. The thicknesses of the ferromagnetic nickel sections were approximately one-half the diameter of the rods (400 nm); this geometry orients the "easy" axis of magnetization perpendicular to the long axis of the rod. After magnetization of the rods with a rare-earth magnet, followed by sonication of the suspension, the rods spontaneously assembled into three-dimensional (3D) bundles that, on average, contained 15-30 rods. A macroscopic model of the rods suggests that the most stable orientation of the magnetic dipoles for rods in a defect-free, hexagonally close-packed arrangement is in concentric rings with the dipoles oriented head-to-tail. This configuration minimizes the energy of the bundle and does not generate a net dipole for the structure. This work provides a simple demonstration that magnetic interactions between ferromagnetic objects can direct and stabilize the formation of ordered, 3D structures by self-assembly.     

Asymmetric dimers can be formed by dewetting half-shells of gold deposited on the surfaces of spherical oxide colloids

Asymmetric dimers consisting of gold microcrystals and spherical silica colloids have been fabricated by depositing thin films of gold onto the spherical colloids to form half-shells, followed by annealing at elevated temperatures. The capability and feasibility of this procedure have been demonstrated with silica and titania beads of 0.2-2 mum in diameter and gamma-Fe2O3/polystyrene@SiO2 core-shell particles 0.5 mum in size. The dimensions of gold microcrystals could be conveniently varied in the range of 100-650 nm by controlling the thickness of gold films and/or the diameter of the spherical colloids. This method provides another route to asymmetric dimers made of colloidal particles that could be different in size, chemical composition, surface functionality, density or sign of surface charge, bulk property, or a combination of these properties.     

Radionuclides in a sediment trap and bottom sediment samples from the eastern Turkish coast of the Black Sea

Summary Radionuclide (¹³⁷Cs, ²³⁸U, ²³²Th and ⁴⁰K) concentrations were determined in a sediment trap and bottom sediment samples collected from a station at the eastern Turkish coast of the Black Sea. The specific activity of the ¹³⁷Cs radionuclide in the settling particles ranged from 0.04±0.01 to 0.10±0.02 Bq^. g^-1dry weight. The calculated flux rate of the ¹³⁷Cs was between 0.37 and 2.59 Bq^. m^-2. d^-1in the sampling periods of 2002 and 2003. The ¹³⁷Cs concentration in the bottom sediment profile were between 0.039±0.013-9.083±0.017 Bq^. g^-1dry weight in the same station. The vertical profile of the radionuclides suggests that they have little mobility during the 17 years after the Chernobyl accident.     

Preparation of hollow beads of poly(styrene-co-divinyl benzene)

Two methods are described for the production of hollow beads by copolymerization of styrene and divinyl benzene. Characterization of the beads is described and growth mechanisms proposed.     

Using wavelets to analyze AFM images of thin films: surface micelles and supported lipid bilayers

This paper presents micro- and nanoanalysis of thin films based on images obtained by atomic force microscopy (AFM). The analysis exploits the discrete wavelet transform and the resulting wavelet spectrum to study surface features. It is demonstrated that the wavelet technique can characterize micro- and nanosurface features and distinguish between similar surface structures. The use of a feature extraction method is shown. The method involves the separation of certain frequency content from the original AFM images and analyzing the data independently to gain quantitative information about the images. By using the feature extraction method, soft surfaces in water are analyzed and nanofeatures are measured. The packing of surface micelles of sodium dodecyl sulfate on a self-assembled monolayer is analyzed. The characteristics of pore formation, due to penetration of the antibacterial peptide protegrin, into a solid-supported lipid bilayer are quantified. The sizes of the pores are obtained, and it is observed that the line tension of the pores reduces the fluctuations of the lipid bilayer.