Inclusive production of the meson in hadronic decays of the Z boson

The inclusive production rate of the ρ^±(770) vector meson in hadronic Z decays is measured with the ALEPH detector at the LEP collider. A total of 3.2 million hadronic events are selected from data recorded between 1991 and 1995. Decays of ρ^±→π⁰+π^± are reconstructed for x_E>0.05 and x_p>0.05 where x_p=p_ρ/p_beam and x_E=E_ρ/E_beam. The average ρ^± multiplicity per hadronic event is evaluated to be N(ρ^±)=2.59±0.03±0.15±0.04 where the first error is statistical and the second systematic. The third error is from the uncertainty in the extrapolation to x_p=x_E=0. The rates and differential cross-section are compared with Monte Carlo model predictions and OPAL measurements. Residual Bose–Einstein correlations are found to be an important component in the analysis.     

New Solutions for (1+1)-Dimensional and (2+1)-Dimensional Kaup–Kupershmidt Equations

In this paper, using the exp-function method we obtain some new exact solutions for (1+1)-dimensional and (2+1)-dimensional Kaup–Kupershmidt (KK) equations. We show figures of some of the new solutions obtained here. We conclude that the exp-function method presents a wider applicability for handling nonlinear partial differential equations.     

The effect of PVA (Bi2O3-doped) interfacial layer and series resistance on electrical characteristics of Au/n-Si (110) Schottky barrier diodes (SBDs)

Two types of Schottky Barrier Diodes (SBDs) with and without PVA (Bi₂O₃-doped) polymeric interfacial layer, were fabricated and measured at room temperature in order to investigate the effects of the PVA (Bi₂O₃-doped) interfacial layer on the main electrical parameters such as the ideality factor (n), zero-bias barrier height (Φ_B0), series resistance (R_s) and interface-state density (N_ss). Electrical parameters of these two diodes were calculated from the current-voltage (I-V) characteristics and compared with each other. The values of Φ_B0, n and R_s for SBDs without polymeric interfacial layer are 0.71 eV, 1.44 and 4775 Ω, respectively. The values of Φ_B0, n and R_s for SBDs with PVA (Bi₂O₃-doped) polymeric interfacial layer are 0.74 eV, 3.49 and 10,030 Ω, respectively. For two SBDs, the energy density distribution profiles of interface states (N_ss) were obtained from forward-bias I-V measurements by taking the bias dependence of R_s of these devices into account. The values of N_ss obtained for the SBD with PVA (Bi₂O₃-doped) polymeric interfacial layer are smaller than those of the SBD without polymeric interfacial layer.     

A nonlinear visco-elastoplastic impact model and the coefficient of restitution

A visco-elastoplastic model for the impact between a compact body and a composite target is presented. The model is a combination of a nonlinear contact law that includes energy loss due to plastic deformation and a viscous element that accounts for energy losses due to wave propagation and/or damping. The governing nonlinear equations are solved numerically to obtain the response. A piecewise linear version of the model is also presented, which facilitates analytical solution. The model predictions are compared to those of the well-known and commonly used Hunt–Crossley model. The effects of the various impact parameters, such as impactor mass, velocity, plasticity, and damping, on the impact response and coefficient of restitution are investigated. The model appears to be suitable for a wide range of impact situations, with parameters that are well defined and easily calculated or measured. Furthermore, the resulting coefficient of restitution is shown to be a function of impact velocity and damping, as confirmed by published experimental data.     

Elastoplastic deformations of rotating parabolic solid disks using Tresca''s yield criterion

Analytical solutions for the stress distribution in rotating parabolic solid disks are obtained. The analysis is based on Tresca's yield criterion, its associated flow rule and linear strain hardening. It is shown that, the deformation behavior of the convex parabolic disk is similar to that of the uniform thickness disk, but in the case of concave parabolic solid disk, it is different. In the latter, the plastic core consists of three different plastic regions with different mathematical forms of the yield criteria. Accordingly, three different stages of elastic–plastic deformation occur. All these stages of elastic–plastic deformation are studied in detail. It is also shown mathematically that in the limiting case the parabolic disk solution reduces to the solution of rotating uniform thickness solid disk.     

A novel approach for strong S-Box generation algorithm design based on chaotic scaled Zhongtang system

Nonlinear Dynamics - Substitution Box (S-Box) is one of the most significant structures used to create an encryption which is strong and resistant against attacks in block encryption algorithms....     

SPE and determination by FAAS of heavy metals using a new synthesized polymer resin in various water and dried vegetables samples

Firstly, poly[phenyl thiadiazole methacrylamide-co-divinylbenzene-co-2-acrylamido-2-methylpropane sulfonic acid] (PTMAAm-co-DVB-co-AMPS), a new polymer resin was synthesized. This polymer resin was characterized by elemental analyzer, X-ray diffractometer, scanning electron microscope (SEM) and IR spectrometer. The glass column packed with the synthesized polymer resin was used for solid phase extraction (SPE). At the same time, the analytes were separated and preconcentrated from various water, dried vegetables samples and standard reference material (CRM) with SPE and determined by flame atomic absorption spectrometer (FAAS). The experimental conditions of this method such as pH, flow rates of sample, flow rates of eluent, type / concentration / volume of eluent, sample volume and matrix ions were examined. The limits of detection (µg L^?1) were calculated (3s) 0.9 for Mn(II), 1.4 for Cd(II), Co(II) and Zn(II), 1.5 for Cr(III), 2.2. for Cu(II), 1.9 for Pb(II),1.5 for Ni(II) and 1.9 for Fe(III) (n = 21). The low relative standard deviation, ≤ 2% (n = 11) and preconcentration factor as 75 for analytes were obtained.     

Monitoring the Instant Creation of a New Fluorescent Signal for Evaluation of DNA Conformation Based on Intercalation Complex

Here we report the monitoring the instant creation of a new fluorescent signal (FS) aroused from a positively charged water-soluble fluorogenic probe, ethidium bromide (EtBr) in the presence of a radical initiator, ammonium persulfate (APS) and an accelerator, tetraethylmetilendiamine (TEMED) for evaluation of deoxyribonucleic acid (DNA) conformation. The results revealed that the occurred FS (λ_ex?=?430 nm; λ_max?=?525 nm) is a reduced form of EtBr (λ_ex?=?480 nm; λ_max?=?617 nm) and it is completely distinct from hydroethidine (λ_ex?=?350 nm; λ_max?=?430 nm), which is two-electron reduced form of EtBr. It was noticed that EtBr was reduced to a new FS during the polymerization of N, N dimethyacrylamide (DMAA) too, at 25 °C in the presence of APS and TEMED or at 55 °C with only APS, and the rate of formation of FS was increased upon treatment time. The effect of nanoclays such as Laponite XLG® and Laponite XLS®, which provide a protective environment for DNA in nature, were also investigated through the reduction process of EtBr in the absence and presence of a water soluble monomer DMAA. We demonstrated that DNA conformation might be evaluated by monitoring FS effectuated during the reduction of EtBr in the presence of nanoclays having positively and negatively charged surfaces. Protective property of DNA against the formation of reduced product was elucidated by carrying out the polymerization at 55 °C. The results revealed that the monitoring of formation of FS in the presence of radical initiator could lead to elucidate the conformation of DNA upon formation of intercalator complex.     

Chloro-Modified Magnetic Fe3O4@MCM-41 Core–Shell Nanoparticles for L-Asparaginase Immobilization with Improved Catalytic Activity,Reusability, and Storage Stability

This paper describes a new support that permits to efficient immobilization of L-asparaginase (L-ASNase). For this purpose, Fe₃O₄ magnetic nanoparticles were synthesized and coated by MCM-41. 3-chloropropyltrimethoxysilane (CPTMS) was used as a surface modifying agent for covalent immobilization of L-ASNase on the magnetic nanoparticles. The chemical structure; thermal, morphological, and magnetic properties; chemical composition; and zeta potential value of Fe₃O₄@MCM-41-Cl were characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential thermal analysis (DTA), differential scanning calorimetry (DSC), vibrating sample magnetometer (VSM), scanning electron microscope (SEM), energy dispersive X-ray (EDX), X-ray diffraction patterns (XRD), and zeta-potential measurement. The immobilization efficiency onto Fe₃O₄@MCM-41-Cl was detected as 63%. The reusability, storage, pH, and thermal stabilities of the immobilized L-ASNase were investigated and compared to that of soluble one. The immobilized enzyme maintained 42.2% of its original activity after 18 cycles of reuse. Furthermore, it was more stable towards pH and temperature compared with soluble enzyme. The Michaelis–Menten kinetic properties of immobilized L-ASNase showed a lower V_max and a similar K_m compared to soluble L-ASNase. Immobilized enzyme had around 47 and 32.5% residual activity upon storage a period of 28 days at 4 and 25 °C, respectively. In conclusion, the Fe₃O₄@MCM-41-Cl@L-ASNase core–shell nanoparticles could successfully be used in industrial and medical applications.