Wavelength and power monitoring of DWDM systems using scanning F–P filter calibrated with a F–P laser

A novel technique to overcome the long-term drift and hysteresis of a scanning Fabry–Perot filter was developed and applied to wavelength and power monitoring of DWDM system. By using the comb peaks generated by a temperature-stabilized, near threshold-biased Fabry–Perot diode laser as wavelength reference for the scanning Fabry–Perot filter, wavelength and power measurement accuracy of better than ±10 pm and 0.2 dB, respectively, were achieved.     

Structural evolution in amorphous silicon and germanium thin films.

The structural evolution in amorphous silicon and germanium thin films has been investigated by high-resolution transmission electron microscopy (HRTEM) in conjunction with autocorrelation function (ACF) analysis. The results established that the structure of as-deposited semiconductor films is of a high density of nanocrystallites embedded in the amorphous matrix. In addition, from ACF analysis, the structure of a-Ge is more ordered than that of a-Si. The density of embedded nanocrystallites in amorphous films was found to diminish with annealing temperature first, then to increase. The conclusions also corroborate well with the results of diminished medium-range order in annealed amorphous films determined previously by a variable coherence microscopy method.     

Structural-acoustic coupling effect on the nonlinear natural frequency of a rectangular box with one flexible plate

The nonlinear natural frequency of a rectangular box, which consists of one flexible plate and five rigid plates, is studied in this paper. The flexible plate is assumed to vibrate like a simple piston. The behavior of the structural-acoustic coupling between the flexible plate and the air cavity is analyzed by using the proposed finite element modal method. The system finite element equation is reduced and expressed in terms of the modal coordinates with small degrees of freedom by using the proposed reduction method. The system nonlinear stiffness matrix representing the large amplitude vibration can be transformed to be a constant modal matrix. The natural frequencies are determined by using the harmonic balance method to solve the eigenvalue equations of the structural-acoustic system. The effect of the cavity depth on the natural frequencies and convergence studies are discussed in detail.     

Studies on antiatherosclerotic agents. Synthesis of 5-substituted derivatives of 7-ethoxycarbonyl-6,8-dimethyl-1(2H)-phthalazinone.off.

Several 5-substituted derivatives of 7-ethoxycarbonyl-6,8-dimethyl-1(2H)- phthalazinone were prepared by means of nitration, reductive amination, and diazonium decomposition. The substituents introduced included NO2, NH2, F, Cl, CN. Among the derivatives, the fluorine compound was obtained only in poor yield because intramolecular cyclization occurred predominantly.     

Purification and some properties of squalene-2,3-epoxide: lanosterol cyclase from rat liver

Squalene-2,3-epoxide: lanosterol cyclase was purified from rat liver in five steps as a soluble and homogeneous protein. The purified enzyme showed a single band on SDS-polyacrylamide gel electrophoresis with a molecular weight of 75 kD. In its native state it behaved as a homo-dimer. The isoelectric point of 5.5 and the apparent Km value for (3S)-squalene-epoxide of 55 microM were estimated for the cyclase.     

赝能隙导致的YBa2(Cu1-xMx)3O7-δ(M=Co,Zn)薄膜的输运性质异常

报道了两类典型元素替代的超导Y123相体系-YBa2(Cu1-xCox)3O7-δ(x=0.01,0.02)和YBa2(Cu1-yZny)3O7-δ(y=0.005,0.010)薄膜的电阻率-温度特性(ρ(T))和Hall效应(RH (T)).研究表明,Co掺杂的Y123相体系十分类似于氧欠掺杂的情况,对Co掺杂的薄膜样品,由电阻率-温度特性定义的赝能隙打开的温度T*分别为193和225K.而Zn掺杂的样品没有观察到赝能隙打开对电阻率-温度特性的影响.由Hall效应的测量和Hall角(cotθH)定义了另一个特征温度T 0,介于Tc与T*之间,这一特征温度与核磁共振(NMR)给出的赝能隙打开温度相近,说明可能源于电子自旋自由度上的能隙打开.在室温到Tc范围内,电阻率-温度特性和Hall效应分别定义了两类不同的转变温度(T*和T 0),可能分别源于电子电荷和自旋通道上的赝能隙的打开,预示着电荷和自旋自由度分别进入某种基态.     

Efficient computation of natural convection in a concentric annulus between an outer square cylinder and an inner circular cylinder

In this work, the natural convection in a concentric annulus between a cold outer square cylinder and a heated inner circular cylinder is simulated using the differential quadrature (DQ) method. The vorticity‐stream function formulation is used as the governing equation, and the coordinate transformation technique is introduced in the DQ computation. It is shown in this paper that the outer square boundary can be approximated by a super elliptic function. As a result, the coordinate transformation from the physical domain to the computational domain is set up by an analytical expression, and all the geometrical parameters can be computed exactly. Numerical results for Rayleigh numbers range from 104 to 106 and aspect ratios between 1.67 and 5.0 are presented, which are in a good agreement with available data in the literature. It is found that both the aspect ratio and the Rayleigh number are critical to the patterns of flow and thermal fields. The present study suggests that a critical aspect ratio may exist at high Rayleigh number to distinguish the flow and thermal patterns. Copyright © 2002 John Wiley & Sons, Ltd.     

Relationship between chemical bond parameters and superconducting temperature in HgBa2Can−1CunO2n+2+δ (n=1, 2, 3, 4)

Bond covalency and valence of elements in HgBa₂Ca_n−1Cu_nO_2n+2+δ (n=1, 2, 3, 4) were calculated and their relationship with T_c was discussed. For both oxygen and argon annealed samples, the results indicated that with the increase of n, the trend of bond covalency of Hg-O and Cu-O was the same or opposite compared with that of superconducting temperature. This may suggest that the magnitudes of Cu-O and Hg-O bond covalency are important in governing the superconducting temperature. For the highest T_c sample, Hg had the lowest valence, implying that lower valence of Hg was preferred in order to produce higher T_c. For fixed n, the valence of Cu in oxygen annealed samples was larger than that in argon annealed samples, indicating that oxygen annealed samples produced more carriers than argon annealed samples.     

DISCRETE HUYGENS' MODELLING APPROACH TO WAVE PROPAGATIONS IN A HOMOGENEOUS ELASTIC FIELD

The application of the discrete Huygens' modelling has been discussed for acoustic wave propagation problems, in which the scalar wave field problems have been focused. The present paper extends the application of the modelling to the elastic wave propagation in a homogeneous elastic medium in which two types of waves, the longitudinal wave and the shear wave, are independent except at the boundary. Each wave can be treated like a scalar wave until the two waves reach the boundary where they couple so as to satisfy the displacement or stress boundary condition. We propose the approach confining ourselves to the two-dimensional field. Some examples are demonstrated, whose solutions are compared with the vectorial wave modelling and finite difference modelling solutions whenever they are available.