Electrochemical characterization and stress corrosion cracking behavior of α-brass in molybdate-containing electrolytes

One of the major challenges in material design is the achievement of reasonable operational efficiency through understanding the factors affecting the material’s performance particularly strength and service lifetime characteristics. In this work, the electrochemical behavior of 72Cu–28Zn α-brass alloy in Na₂MoO₄-containing electrolytes was investigated using potentiodynamic polarization and electrochemical frequency modulation techniques complemented with scanning electron microscopy. Also, stress corrosion cracking behavior of the alloy under both open-circuit potential and anodic applied potentials, using the slow strain rate technique, was evaluated. The results drawn from the different techniques are comparable.     

Best candidate materials for fast speed response and high transmission performance efficiency of acousto optic modulators

An acousto-optic modulator (AOM), also called a Bragg cell, uses the acousto-optic effect to diffract and shift the frequency of light using sound waves (usually at radio frequency). They are used in lasers for quality switching, telecommunications for signal modulation, and in spectroscopy for frequency control. This paper has presented the best candidate selected acousto optic materials based AOM for upgrading speed response and transmission performance characteristics. These materials are common materials for acousto-optic devices such as silica glass (SiO₂), tellurium dioxide TeO₂), gallium phosphide, and gallium arsenide. As well as we have deeply investigated the important transmission characteristics of acousto optic modulators such as transmission performance efficiency, transmission bit rate, diffraction angle and efficiency, transient speed response, signal transmission quality, bit error rate and modulation bandwidth under wide range of the affecting parameters for different selected acousto optic materials to be the major of interest.     

Performance evaluation of a WDM/OCDM based hybrid optical switch utilizing efficient resource allocation

A hybrid optical switch （HOS） with physical layer of wavelength division multiplexing and optical code division multiplexing （WDM/OCDM） scheme is proposed. An additional feature to the HOS than optical cross connect （OXC） is that the controller can process requests for both circuit establishment and burst scheduling. In our study, the measurement criteria of HOS are the blocking probability, probability of error, and probability of outage. To simplify the analysis, no distinction is made between a circuit in progress and a burst in progress. Moreover, a minimum fit （MinF） resource allocation strategy is applied in order to increase the bandwidth efficiency and control the multiplexing interference of the OCDM. A 2D Markov model for the HOS is presented using the MinF strategy. Numerical results reveal that the code parameters and the resource allocation strategy greatly affect the performance. Certain periority can be achieved by assigning shorter codes to high periority users and longer codes to low periority users. Also, the probability of error and outage are reduced bv aonling the MinF strategy.     

Harmonic and intermodulation distortions and noise associated with two-tone modulation of high-speed semiconductor lasers

We present results of modeling and simulation of the harmonic and intermodulation distortions as well as the intensity noise of high-speed semiconductor lasers under two-tone modulation. Multiple quantum-well lasers are considered, which are characterized by large differential gain and a modulation bandwidth of about 25GHz. The study is based on the rate equation model of semiconductor lasers excited by injection current with two sinusoidal tones separated by a radio frequency. The modulated laser signal is modeled in both the time and frequency domains. The time domain characteristics include the fluctuating waveform, while the frequency domain characteristics include the frequency spectrum of the relative intensity noise (RIN), carrier-to-noise ratio, modulation response, harmonic distortion, and the second- and third-order intermodulation distortions (IMD2 and IMD3). The analysis is performed for three frequencies of 5, 15, and 24 GHz, which are, respectively, lower, comparable, and higher than the laser relaxation frequency. The range of the modulation depth covers the regimes of small and large-signal modulation. We show that both RIN and IMD3 of two-modulated laser are minimum when the modulation frequency is 5GHz, and maximum when the modulation frequency is 24 GHz. The second-order harmonic distortion, IMD2, and IMD3 values are larger in the vicinity of relaxation oscillations and increase with the modulation index, especially under large-signal modulation.     

Extension of the Jones matrix formalism to higher-order transverse modes

The well-known Jones matrix formalism, which can be directly applied to the propagation of the polarization of fundamental (TEM(00)) laser resonator modes, has to be modified for higher-order transverse modes. It is shown that this can be done in straightforward manner by using N x N matrices instead of the 2 x 2 Jones matrices, where N denotes the number of orthogonal polarization states of the transverse mode under consideration. The most common case of TEM(01) Hermite-Gaussian modes, where N is four, is discussed in detail.     

Numerical analysis of electronic conductivity in graphene with resonant adsorbates: comparison of monolayer and Bernal bilayer

We describe the electronic conductivity, as a function of the Fermi energy, in the Bernal bilayer graphene (BLG) in presence of a random distribution of vacancies that simulate resonant adsorbates. We compare it to monolayer (MLG) with the same defect concentrations. These transport properties are related to the values of fundamental length scales such as the elastic mean free path L _e , the localization length ξ and the inelastic mean free path L _i . Usually the later, which reflect the effect of inelastic scattering by phonons, strongly depends on temperature T. In BLG an additional characteristic distance l ₁ exists which is the typical traveling distance between two interlayer hopping events. We find that when the concentration of defects is smaller than 1%–2%, one has l ₁ ≤ L _e ? ξ and the BLG has transport properties that differ from those of the MLG independently of L _i (T). Whereas for larger concentration of defects L _e <l ₁ ? ξ, and depending on L _i (T), the transport in the BLG can be equivalent (or not) to that of two decoupled MLG. We compare two tight-binding model Hamiltonians with and without hopping beyond the nearest neighbors.     

The master equation for a two-level atom in a laser field with squeezing-like terms

In this paper, we derive the time dependent solution of the effective master equation for the reduced density matrix operator of a two-level atom driven by a strong classical field and damped into a “modelled” reservoir with non-flat density of modes. The effects of different parameters on the atomic inversion, the von Neumann entropy and the entropy squeezing are discussed.     

D3→FJ emission of Tb doped sol–gel silica

Amorphous silica samples doped with 0.1 and 1 mol% of terbium (Tb) were synthesized by the sol–gel method. In addition to the green light associated with ⁵D₄→⁷F_J transitions of Tb³⁺, the sample containing 0.1 mol% also emitted blue light as a result of ⁵D₃→⁷F_J transitions during photoluminescence (PL) measurements. As a result of concentration quenching this blue emission was not observed for the samples doped with the higher concentration (1 mol%). However the blue ⁵D₃ →⁷F_J emission was observed in the 1 mol% doped samples during cathodoluminescence (CL) measurements. Since a rough calculation indicated that the excitation rate in the CL system where the blue emission is observed may be similar to a laser PL system under conditions where the blue emission is not observed, the difference is attributed to the nature of the excitation sources. It is suggested that during the CL excitation incident electrons can reduce non-luminescent Tb⁴⁺ ions in the silica, substituting for Si⁴⁺ ions, to the excited (Tb³⁺)? state and that these are responsible for the blue emission, which does not occur during PL excitation.     

Dual-channel spectral subtraction algorithms based speech enhancement dedicated to a bilateral cochlear implant

In this paper, two speech enhancement algorithms (SEAs) based on spectral subtraction (SS) principle have been evaluated for bilateral cochlear implant (BCI) users. Specifically, dual-channel noise power spectral estimation algorithm using power spectral densities (PSD) and cross power spectral density (CPSD) of the observed signals was studied. The enhanced speech signals were obtained using either Dual Channel Non Linear Spectral Subtraction ‘DC-NLSS’ or Dual-Channel Multi-Band Spectral Subtraction ‘DC-MBSS’ algorithms. For performance evaluation, some objective speech assessment tests relying on Perceptual Evaluation of Speech Quality (PESQ) score and speech Itakura-Saito (IS) distortion measurement were performed to fix the optimal number of frequency band needed in DC-MBSS algorithm. In order to evaluate the speech intelligibility, subjective listening tests were assessed with 50 normal hearing listeners using a specific BCI simulator and with three deafened BCI patients. Experimental results, obtained using French Lafon database corrupted by an additive babble noise at different Signal-to-Noise Ratios (SNR), showed that DC-MBSS algorithm improves speech understanding better than DC-NLSS algorithm for single and multiple interfering noise sources.