Ab-initio calculations of structural,electronic,and optical properties of Zn_3(VO_4)_2

The structural, electronic, and optical properties of Zn_3(VO_4)_2 are investigated using full potential linearized augmented plane wave(FP-LAPW) method within the framework of density functional theory(DFT). Various approaches are adopted to treat the exchange and correlation potential energy such as generalized gradient approximation(GGA),GGA+U, and the Tran–Blaha modified Becke–Johnson(TB-mBJ) potential. The calculated band gap of 3.424 eV by TB-mBJ is found to be close to the experimental result(3.3 eV). The optical anisotropy is analyzed through optical constants,such as dielectric function and absorption coefficient along parallel and perpendicular crystal orientations. The absorption coefficient reveals high absorption(1.5 × 10~(6) cm~(-1)) of photons in the ultraviolet region.     

Electrochemical characterization and stress corrosion cracking behavior of α-brass in molybdate-containing electrolytes

One of the major challenges in material design is the achievement of reasonable operational efficiency through understanding the factors affecting the material’s performance particularly strength and service lifetime characteristics. In this work, the electrochemical behavior of 72Cu–28Zn α-brass alloy in Na₂MoO₄-containing electrolytes was investigated using potentiodynamic polarization and electrochemical frequency modulation techniques complemented with scanning electron microscopy. Also, stress corrosion cracking behavior of the alloy under both open-circuit potential and anodic applied potentials, using the slow strain rate technique, was evaluated. The results drawn from the different techniques are comparable.     

Band structures of symmetrical graphene superlattice with cells of three regions

We study the electronic band structures of massless Dirac fermions in symmetrical graphene superlattice with cells of three regions. opening gaps and additional Dirac points. Finally, we inspect the potential effect on minibands, the anisotropy of group velocity and the energy bands contours near Dirac points. We also discuss the evolution of gap edges and cutoff region near the vertical Dirac points.     

Polymer complexes. LXXVI. Synthesis,characterization, CT‐DNA binding,molecular docking and thermal studies of sulfoxine polymer complexes

Novel polymer complexes of 8‐hydroxyquinoline‐5‐sulfonic acid hydrate ( H ₂ L ) with Cu²⁺, Co²⁺ and Ni²⁺ chloride were prepared and characterized. Microanalysis, magnetic susceptibility, IR spectra, electron spin resonance, mass spectra, X‐ray, molar conductance, thermal, and UV–Vis spectra studies have been used to confirm the structure of the prepared polymer complexes. The molecular and electronic structures of the hydrogen bond conformers for ligand ( H ₂ L ) were optimized theoretically and the quantum chemical parameters were calculated. On the basis of elemental and IR data, the chemical structure of metal chelates commensurate that the tri‐dentate (H₂L) coordinate to metal chlorides through oxygen atom of phenolic OH and oxygen atom of SO₃‐H group by replacing H atoms and nitrogen of the quinoline ring. The magnetic studies suggested the octahedral geometrical structure for all produced polymer complexes with general formula {[ML (OH₂)₃] .xH₂O}_n (M = Cu²⁺, x = 1.; Co²⁺, x = 2 and Ni²⁺, x = 2) in molar ratio (1:1). Coats–Redfern and Horowitz–Metzger methods have been used for calculating the activation thermodynamic parameters of the thermal decomposition for H ₂ L and its polymer complexes. The interaction between H ₂ L and its transition metal complexes with the calf thymus DNA (CT‐DNA) was determined by UV–Vis spectra. Binding efficiency between H ₂ L with the receptors of the prostate cancer (PDB code 2Q7L Hormone) and the breast cancer (PDB code 1JNX Gene regulation) was studied by molecular docking. The inhibition behaviour of H ₂ L against the corrosion of carbon steel / HCl (2 M) solution was studied by weight loss, Tafel polarisation, electrochemical impedance spectroscopy (EIS) and electrochemical frequency modulation (EFM) techniques. The adsorption isotherm was found to be Friendlish isotherm. The morphology of inhibited carbon steel? s surface was studied using scanning electron microscope (SEM) and energy dispersive X‐ray spectroscopy (EDS).     

External Classical Field and Damping Effects on a Moving two Level atom in a Cavity Field Interaction with Kerr-like Medium

International Journal of Theoretical Physics - The interaction between a moving two-level atom and squeezed coherent states in the presence of Kerr like medium and an external classical field is...     

Sensing and photocatalytic properties of nanosized Cu(I)CN organotin supramolecular coordination polymer based on pyrazine

Orange prismatic crystals of the supramolecular coordination polymer (SCP) _∞³[Cu(CN)₂(Me₃Sn)(Pyz)], SCP 1 , were synthesized using a self‐assembly method under ambient conditions. Nanosized 1 was obtained using the same molar ratio in water by ultrasonic irradiation. SCP 1 was characterized using single‐crystal X‐ray diffraction, elemental analysis, thermal analysis and Fourier transform infrared spectroscopy. SCP 1 and its nanosized 1 particles were also examined using powder X‐ay diffraction and scanning electron microscopy. The luminescence emission of SCP 1 was studied as well as its use as a sensor for the detection of common organic solvents and metal ions. Also, the catalytic activities of nanosized 1 towards various organic dyes were investigated under ambient conditions, UV irradiation and ultrasonic irradiation. Nanosized 1 as a heterogeneous nanoparticle catalyst exhibits high catalytic activity for the degradation of eosin‐Y and acid blue dyes. The mechanism of degradation investigated using various scavenger techniques is proposed and discussed. The catalytic oxidation process is mainly caused by ?OH radicals.     

Structural studies and biological evaluation of Co (II), Ni (II) and Cu (II) complexes of carbohydrazone derived from ethyl acetoacetate in addition to crystallographic description of La (III) or Sm (III) catalytic activity abnormal product

New carbohydrazone ligand derived from the condensation of carbohydrazide and ethyl acetoacetate, diethyl 3,3′‐(carbonylbis (hydrazin‐2‐yl‐1‐ylidene))(3E,3′E)‐dibutyrate (H₄EBC), and its divalent Co, Ni and Cu chelates have been isolated and characterized utilizing convenient methods. ¹H‐NMR spectrum of H₄EBC revealed the abundance of the enol isomer in solution, which was the opposite to what was shown by the solid IR. This was supported by comparing the theoretical IR of both keto and enol forms. In [Ni(H₄EBC)Cl₂(H₂O)]·2H₂O, H₄EBC acts as a neutral NON tridentate ligand via the (C=O)_carbonyl oxygen atom besides the two (C=N)_azomethine nitrogen atoms, while in [Co(H₄EBC)Cl₂(2H₂O)]·2H₂O, H₄EBC behaves as a neutral NN bidentate ligand through the two azomethine groups. Magnetic measurements inherent to their electronic spectra show that both Ni (II) and Co (II) chelates have octahedron coordination frameworks. On the other hand, the ligand behaves as a binegative tetradentate in [Cu₂(H₄EBC)Cl₂]·H₂O via the deprotonated (C=O)_carbonyl groups of the ethyl acetoacetate framework and the two (C=N)_azomethine groups. In the latter complex, the carbonyl group of the carbohydrazide moiety is converted to hydroxyl group. Cu (II) complex has a tetrahedral geometry according to ESR and electronic spectral data. The reaction of H₄EBC with SmCl₃·6H₂O or LnCl₃·7H₂O gave single crystals of abnormal product (C₁₆H₁₆N₄O₄). The packing diagram of this crystal has a chain structure. The photoluminescence spectra of [Cu ₂ (H ₄ EBC)Cl ₂ ]·H ₂ O , [Co(H ₄ EBC)Cl ₂ (H ₂ O) ₂ ]·2H ₂ O and [Ni(H ₄ EBC)Cl ₂ (H ₂ O)]·2H ₂ O display emission broad‐bands at 342, 321 and 337 nm, respectively. The microbial behavior of the synthesized moieties was investigated against various bacterial and fungal strains. [Cu₂(H₄EBC)Cl₂]·H₂O complex shows the same activity as ampicillin towards Escherichia coli and Staphylococcus aureus with inhibition zones of 26 and 22 mm, respectively. Antioxidant activity is determined using bleomycin‐dependent DNA damage assay besides erythrocyte hemolysis. Finally, in vitro cytotoxic activities against two different cell lines have been examined.     

Flow Injection Chemiluminescence Method for Nalbuphine Hydrochloride in Pharmaceutical Formulations Using Tris(2,2'-bipyridyl)ruthenium(II) Chloride-diperiodatocuprate(III) Reaction

Asensitive and selective method employing chemiluminescence(CL) coupled with flow injection(FI) is reported for nalbuphine hydrochloride(NAL) assay in pharmaceutical formulations. The enhancement effect of NAL on the CL reaction between tris(2,2'-bipyridyl)ruthenium(II) chloride-diperiodatocuprate(III) {Ru[(bpy)₃]²⁺-Cu(III) complex} in acidic medium is used as analytical measurement. The optimal conditions of the CL reaction were sulfuric acid 1.0×10^-3 mol/L, Ru[(bpy)₃]²⁺ 7.5×10^-5 mol/L, Cu(III)/Ag(III) complexes 4.0×10^-4/5.0×10^-4 mol/L, sample loop volume of 120 μL and flow rate of 2.5 mL/min. The sensitivities of the method in terms of detection(S/N=3) and quantification(S/N=10) limits are 5×10^-4 and 0.001 ppm(1 ppm=1 mg/L), respectively. The linear response of the instrument in the form of CL intensity with respect to NAL concentration is over the range 0.001-15.0 ppm(R²=0.9999) with relative standard deviation from 0.8% to 3.2% and injection throughput of 120 injection/h. The applications of the method include the quantitative analysis of NAL in pharmaceutical injection samples. Variations and the average results of the proposed method are not signi-ficantly different from the results of a reported method by applying F- and paired student t-test. The most likely CL reaction mechanism is written in accordance with spectrophotometric and CL studies.