Study of support effects on the reduction of Ni2+ ions in aqueous hydrazine

We have studied the effect of silica of quartz-type on the reducibility of nickel acetate in aqueous hydrazine (80 degrees C, pH = 10-12) and metal particle formation. The obtained materials were characterized by X-ray diffraction, transmission electron microscopy, and thermodesorption experiments. With nickel acetate alone, the reduction was partial (45%) and a metal film at the liquid-gas interface or a powdered metal precipitate with an average particle size of 120 nm was obtained. In the presence of silica as the surfactant, the reduction of nickel acetate was total and the nickel phase deposited as a film on the support with an average particle size of 25 nm. Supported nickel acetate was also totally reduced. Crystallites of a mean particle size of about 3 nm were obtained. Decreasing the nickel content or increasing the hydrazine/nickel ratio decreased the metal particle size. Whiskers were formed for low nickel loadings. Hydrogen thermal treatment of the reduced phase showed that the organic acetate fragment, belonging to the precursor salt, still remained strongly attached to the nickel phase. The amount of the retained organic matrix depended on the metal particle size. Surface defects are suggested as active sites, which enhanced nickel ion reduction in the presence of silica as the surfactant or support. Metal-support interactions and the nucleation/ growth rate were the main factors determining the size and morphology of the supported metal particles formed. The organic matrix covered the reduced nickel phase.     

Complexes of tris(o-phenanthroline)nickel(II) and copper(II) bromide with dithiocarbamates derived from α-amino acids

Complexes of 1,10-o-phenanthroline (o-phen)-Ni^II and Cu^II with dithiocarbamates derived from -amino acids (glycine, phenylalanine, alanine, methionine and tryptophan) were synthesized and characterized by chemical analysis, spectral and thermal studies and by biological screening; the complexes are non-electrolytes. The empirical formula are [Ni(o-phen)₂(aadtc)] and [Cu₂(o-phen)₂(phaladtc)(H₂O)₂Br₂] where, aadtc = glycinyl-, phenylalaninyl-, alaninyl-, methioninyl- and tryptophanyldithiocarbamate and phaladtc = phenylalaninyldithiocarbamate. The structure of these complexes is probably octahedral. Molecular association through hydrogen bonding between the —NH and the carboxylate groups is proposed for the Ni^II complexes. The Cu^II complex is dimeric with the phenylalaninyldithiocarbamate acting as a bridge.     

Enhancement of the catalytic activity of [Cu2(TS)(OH)2(OAc)] using superconductor cuprate sample

A superconducting sample (Nd_0.1Y_0.9Ba₂Cu₃O_7-δ) has been tried as a catalyst for H₂O₂ decomposition. All parameters affecting the reaction rate (concentration of H₂O₂, weight of catalyst, temperature and pH) were studied and the optimum conditions were evaluated. A mixture of the superconducting cuprate with [Cu₂(TS)(OH)(OAc)] using different percentages of the sample has been prepared and tried kinetically under the same mentioned conditions. An attempt was made to increase the activity of the complex. The data show that the cuprate sample alone was found to be almost inactive when compared with that of the mixture. The catalytic mechanism in the absence and presence of the complex was suggested.     

De novo enantioselective syntheses of galacto-sugars and deoxy sugars via the iterative dihydroxylation of dienoate

An efficient route to various sugar lactones has been developed. Key to the overall transformation is the sequential osmium-catalyzed dihydroxylation of 2,4-dienoates. The simplest (one-step/racemic) example of this reaction occurs when the dihydroxylation is performed with aqueous NMO in MeOH. When the first dihydroxylation is performed using the AD-mix procedure, an enantioselective variant results. When a matched AD-mix procedure is used for the second dihydroxylation, an exceedingly diastereo- and enantioselective synthesis of galacto-1,4-lactone results. [Reaction: see text]     

Preparation of234Th(UX1) by extraction of238U. determination of thorium with arsenazo-III

Summary Radiochemical procedures have been worked out to prepare²³⁴Th(UX₁) with and without carrier from uranium using N-oxide of 4-(5-nonyl)pyridine in sulphuric acid media. This reagent has also been employed in the development of a combined solvent extraction-ion exchange-spectrophotometric method for the determination of thorium in various samples.

---

Zusammenfassung Radiochemische Methoden zur Herstellung von²³⁴Th(UX₁) aus Uran mit und ohne Träger und unter Verwendung von 4-(5-Nonyl)pyridin-N-oxid in schwefelsaurer Lösung wurden ausgearbeitet. Dieses Reagens wurde auch für die Ausarbeitung einer Thoriumbestimmung in verschiedenartigen Proben auf der Grundlage von Extraktion, Ionenaustausch und Spektro-photometrie verwendet.

     

Coordination compounds of hydrazine derivatives with transition metals,part XVIII. Cobalt(II) and cobalt(III) chelates with schiff bases derived from hydrazine-S-methyldithiocarboxylate and thiosemicarbazide

Summary The reactions of aldehydic and ketonic Schiff bases derived from hydrazine-S-methyl dithiocarboxylate and thiosemicar-bazide with cobalt(II) acetate were investigated. Octahedral tris ligand cobalt(III) chelates were formed with aldehydic Schiff bases whereas tetrahedral bis ligand cobalt (II) chelates were isolated with ketonic Schiff bases.N-isopropylidene hydrazine-S-methyldithiocarboxylate, however, gave both octahedral tris cobalt(III) and tetrahedral bis cobalt(II) chelates. These results are interpreted in terms of the steric requirements of the Schiff base used.     

Synergic effect of triphenylphosphine oxide (TPPO) on the extraction of Hg(II), Se(IV), Co(II) and Mn(II) with fluorinated pyrazolone (HPMTFP)

Extraction of Hg(II), Se(IV), Mn(II) and Co(II) has been carried out with 1-phenyl-3-methyl-4-trifluoroacetyl-2-pyrazolin-5-one (HPMTFP) and triphenylphosphine oxide (TPPO) into chloroform from pH 1–10. Quantitative extraction of Hg(II), Mn(II) and Co(II) at pH 4 with equimolar 0.05M (PMTFP+TPPO) in chloroform was observed. Se(IV) remains unextracted at this pH range. The stoichiometric composition of the extracted complexes M(PMTFP)₂·nH₂O (M=Mn, Hg), M(PMTFP)₂·2TPPO (M=Mn and Co) and Co(PMTFP)₂·TPPO·H₂O at less than 0.1M TPPO has been established. The formation constantsK _m,0 andK _m,n and stability constants _m,n have been computed. The analytical method developed was applied to the IAEA standard reference material (SRM) potato fluor V-4 for the determination of these elements using NAA technique.     

Fused quinoline heterocycles VI: Synthesis of 5H‐1‐thia‐3,5,6‐triazaaceanthrylenes and 5H‐1‐thia‐3,4,5,6‐tetraazaaceanthrylenes

Ethyl 3‐amino‐4‐chlorothieno[3,2‐c]quinoline‐2‐carboxylate ( 4 ) is a versatile synthon, prepared by reacting an equimolar amount of 2,4‐dichloroquinoline‐3‐carbonitrile ( 1 ) with ethyl mercaptoacetate ( 2 ). Ethyl 5‐alkyl‐5H‐1‐thia‐3,5,6‐triazaaceanfhrylene‐2‐carboxylates 9a‐c , novel perianellated tetracyclic heteroaro‐matics, were prepared by refluxing 4 with excess of primary amines 7a‐c to yield the corresponding amino‐thieno[3,2‐c]quinolines 8a‐c . Subsequent reaction with an excess of triethyl orthoformate (TEO) furnished 9a‐c . Reaction of 4 with TEO in Ac₂O at reflux, gave the simple acetylated compounds, thieno[3,2‐c]‐quinolines 12 and 13 . Refluxing 4 with benzylamine ( 7d ) gave 10 , and subsequent treatment with TEO gave the tetracyclic compound 11 . Refluxing 13 with an excess of alkylamines 7a‐d gave the fhieno[3,2‐c]quino‐lines 15 . Refluxing the aminothienoquinolines 8b with an excess of triethyl orthoacetate gave thieno[3,2‐c]quinoline 17 , while heating with Ac₂O gave 18 and 19 , with small amounts of 16 . Reaction of 8a,b with ethyl chloroformate and phenylisothiocyanate generated the new 1‐thia‐3,5,6‐triazaaceanthrylenes 20a,b and 21a,b , respectively. Diazotization of 8a‐c afforded the novel tetracyclic ethyl 5‐alkyl‐5H‐1‐fhia‐3,4,5,6‐tetraazaaceanthrylene‐2‐carboxylates 22a‐c in good yields.     

Highly sensitive catalytic determination of molybdenum

A novel, highly sensitive, selective, and simple kinetic method was developed for the determination of Mo(VI) based on its catalytic effect on the oxidation of 1-amino-2-naphthol-4-sulfonic acid (ANSA) with H₂O₂. The reaction was followed spectrophotometrically by tracing the oxidized product at 465 nm after 30 min of mixing the reagents. The optimum reaction conditions were: 10 mmol l⁻¹ ANSA, 50 mmol l⁻¹ H₂O₂, 100 mmol l⁻¹ acetate buffer of pH 5.0 ± 0.05 and at 40 °C. Addition of 200 μg ml⁻¹ diethylenetriaminepentaacetic acid (DTPA) conferred high selectivity for the proposed method. Following the recommended procedure, Mo(VI) could be determined with a linear calibration graph up to 2.5 ng ml⁻¹ and a detection limit, based on the 3S_b-criterion, of 0.027 ng ml⁻¹. The unique sensitivity and selectivity of the implemented method allowed its direct application to the determination of Mo(VI) in natural and industrial waste water. The method was validated by comparison with the standard ETAAS method. Moreover, published catalytic-spectrophotometric methods for the determination of molybdenum were reviewed.     

Hall effects and entropy generation applications for peristaltic flow of modified hybrid nanofluid with electroosmosis phenomenon

The electroosmotic peristaltic flow of modified hybrid nanofluid in presence of entropy generation has been presented in this thermal model. The Hall impact and thermal radiation with help of nonlinear relations has also been used to modify the analysis. The assumed flow is considered due to a non-uniform trapped channel. The properties of modified hybrid nanofluid model are focused with interaction of three distinct types of nanoparticles namely copper ($Cu)$, silver ($Ag$) and aluminum oxide ($A{l}_2{O}_3).$ The mathematical modeling and significances of entropy generation and Bejan number are identified. With certain flow assumptions, the governing equations are attained for optimized peristaltic electroosmotic problem. Widely used assumptions of long wave length and low Reynolds number reduced the governing equations in ordinary differential equations. The ND solver is flowed for the solution process. The physical significant of results is observed by assigning the numerical values to parameters.