Preparation and application of functional polymers—II. Preparation of vinyl ethers and thioethers using polymer-supported phosphonium salts

Insoluble polystyryldiphenyl-methoxymethyl- and methylthiomethyl-phosphonium chlorides have been prepared by treating polystyryldiphenylphosphine with chloromethylmethyl-ether and thioether respectively. These reagents were used for the conversion under mild conditions of carbonyl compounds into vinyl-ethers and thioethers, otherwise difficult to obtain; yields are high and work-up is easy. Moreover, methyl and ethyl β-styryl ethers were also prepared from the polymeric phosphorane by treatment with formate esters.     

Ion-Pair Formation in Pharmaceutical Analysis. Conductimetric Determination of Promazine, Chlorpromazine, Promethazine, Imipramine and Ciprofloxacin Hydrochlorides in Pure Form, Drug Formulations and Urine

 Potassium ferricyanide and sodium tetraphenylborate were used as titrants for the conductimetric determination of promazine HCl, chlorpromazine HCl, promethazine HCl, imipramine HCl and ciprofloxacin HCl through ion-associate complex formation. The molar combining ratio, effects of dilution of titrant, temperature and solvent were studied. The accuracy of the method is indicated by excellent recovery (99.50–99.96%). The sensitivity of the proposed method is discussed and the results are compared with the pharmacopoeial or the official methods. The suggested method has been applied for the analysis of the mentioned compounds in their pharmaceutical formulations and urine. Received March 1, 1998. Revision May 31, 1999.     

Effect of gamma-rays on the formation of color centers in copper-containing lead borate glasses

Absorption bands in the range of 350–950 nm, induced in copper-containing lead borate glasses by -rays were identified and characterized. The effect of irradiation dose, copper oxide and lead oxide contents on the intensity and position of the induced absorption bands were also considered. Several induced absorption bands were observed. At least two bands in the ranges of 740–780 and 850–870 nm could be identified. They are suggested to be associated with induced Cu⁽²⁺⁾ ions. The band in the 800–830 nm (1.6 eV) range is ascribed to the Pb⁽³⁺⁾ ion, whereas others in the ranges of 600–630 and 650–730 nm are associated with the intrinsic defects formed in the base glass.     

Reductive Amination of Aldehydes and Ketones with Sodium Triacetoxyborohydride. Studies on Direct and Indirect Reductive Amination Procedures(1)

Sodium triacetoxyborohydride is presented as a general reducing agent for the reductive amination of aldehydes and ketones. Procedures for using this mild and selective reagent have been developed for a wide variety of substrates. The scope of the reaction includes aliphatic acyclic and cyclic ketones, aliphatic and aromatic aldehydes, and primary and secondary amines including a variety of weakly basic and nonbasic amines. Limitations include reactions with aromatic and unsaturated ketones and some sterically hindered ketones and amines. 1,2-Dichloroethane (DCE) is the preferred reaction solvent, but reactions can also be carried out in tetrahydrofuran (THF) and occasionally in acetonitrile. Acetic acid may be used as catalyst with ketone reactions, but it is generally not needed with aldehydes. The procedure is carried out effectively in the presence of acid sensitive functional groups such as acetals and ketals; it can also be carried out in the presence of reducible functional groups such as C-C multiple bonds and cyano and nitro groups. Reactions are generally faster in DCE than in THF, and in both solvents, reactions are faster in the presence of AcOH. In comparison with other reductive amination procedures such as NaBH(3)CN/MeOH, borane-pyridine, and catalytic hydrogenation, NaBH(OAc)(3) gave consistently higher yields and fewer side products. In the reductive amination of some aldehydes with primary amines where dialkylation is a problem we adopted a stepwise procedure involving imine formation in MeOH followed by reduction with NaBH(4).     

Development of novel LSM/GDC composite and electrochemical characterization of LSM/GDC based cathode-supported direct carbon fuel cells

(La_0.8Sr_0.2)_0.95MnO_3?δ (LSM)–Gd_0.1Ce_0.9O_2?δ (gadolinium-doped ceria, GDC) composite cathode material was developed and characterized in terms of chemical stability, sintering behaviour, electrical conductivity, mechanical strength and microstructures to assess its feasibility as cathode support applications in cathode-supported fuel cell configurations. The sintering inhibition effect of LSM, in the presence of GDC, was observed and clearly demonstrated. The mechanical characterization of developed composites revealed that fracture behaviour is directly affected by pore size distribution. The Weibull strength distribution showed that for bimodal pore size distribution, two different fracture rates were present. Furthermore, the contiguity of LSM and GDC grains was calculated with image analysis, and correlation of microstructural features with mechanical and electrical properties was established. Subsequently, an LSM/GDC-based cathode-supported direct carbon fuel cell (DCFC) with Ni/ScSZ (scandia-stabilised zirconia) anode was successfully fabricated via slurry coating and co-firing techniques. The microstructures of electrodes and electrolyte layers were observed to confirm the desired morphology after co-sintering, and a single cell was electrochemically characterized in solid oxide fuel cell (SOFC) and DCFC mode with ambient air as oxidant. The higher values of open-circuit voltage indicated that the electrolyte layer prepared by vacuum slurry coating is dense enough. The corresponding peak power densities at 850 °C were 450 and 225 mW cm^?2 in SOFC and DCFC mode, respectively. Electrochemical impedance spectroscopy was carried out to observe electrode polarization and ohmic resistance.     

An efficient and facile multicomponent synthesis of 4,6-diarylpyridine derivatives under solvent-free conditions

We present an efficient and facile synthesis of 4,6-diaryl-2-oxo-1,2-dihydropyridine-3-carbonitriles (5a–j) via a four-component system of aromatic aldehydes (1), acetophenones (2), ethyl cyanoacetate (3), and ammonium acetate (4). The short reaction time coupled with the simplicity of the reaction procedure and clean reaction make this method one of the most efficient methods for synthesis of this class of compounds.     

Modeling of iron adsorption on HTTA-loaded polyurethane foam using Freundlich,Langmuir and D-R isotherm expressions

The sorption of Fe(III) at low pH range from 1 to 4.5 on open cell polyether type HTTA-loaded polyurethane foam has been carried out using batch technique. The optimum shaking time for 2.5· 10^–4M solution of Fe(III) was found to be 30 minutes. The concept of macropore and micropore nature of polyurethane foam sorbent offers unique advantages of adsorption. Freundlich and Langmuir adsorption isotherms are followed at low concentration range from 1·10^–4 to 3·10^–4M solution of Fe(III). The Freundlich constant (1/n=0.46±0.013 andK=9.16±1.39 mg·g^–1) and Langmuir isotherm constants(M=21.78 mg·g^–1 andb=88.41±9.731·g^–1) were established. The sorption mean free energyE=12.22±0.09 kJ·mol^–1 and loading capacityC _m =145.21±6.1 mg·g^–1 were evaluated using Dubinin-Radushkevich isotherm, which suggested that the adsorption mechanism was chemisorption.     

Solvent extraction of trivalent lanthanide Pr(III), Ho(III) and Er(III) with N-benzoyl-N-phenylhydroxylamine

Extraction of Pr(III), Ho(III) and Er(III) has been studied in the pH range of 1–10 with N-benzoyl-N-phenylhydroxylamine (BPHA) in benzene. The separation was found to be quantitative in borate media from pH 7 to 10, at an ionic strength of 0.1M (H⁺, BO₃ ^3–). The stoichiometric composition of the complexes under the optimal conditions of shaking time, pH and reagent concentration was formulated using slope analysis and found to be M(BPHA)₃, where M=Pr(III), Ho(III) and Er(III). The effect of various masking agents shows that citrate, ascorbate, EDTA, oxalate, fluoride and phosphate form stable complexes with these rare earths as compared to BPHA. The decontamination factors for different cations with respect to these rare earths under the optimum conditions have been evaluated.     

Comparative studies on the adsorption and association of 3-methylxanthine and 7-methylxanthine at a charged interface

Summary A systematic comparative study of the adsorption and association of 3-methylxanthine (3MXan) and 7-methylxanthine (7MXan) at mercury-solution interfaces in acidic, neutral, and alkaline buffer solutions was undertaken by ac voltammetry. At bulk concentrations of3MXan above a threshold value, the stacking interactions between vertically oriented molecules lead to a slow reorientation aroundE _ecm, and the molecules adopt a perpendicular orientation. The association of the adsorbed molecules of7MXan is hindered and is not effective in promoting base-base stacking interactions. The enhanced surface activity of3MXan compared to7MXan results from the different position of the methyl group in the purine moiety. The effect of some divalent metal ions on adsorption stages and association of the investigated compounds has been studied. The results indicate that the complexation of methylated xanthine enhances the stacking interactions and hence would be expected to facilitate the formation of perpendicularly stacked layers ofM(II)-MXan complexes on the electrode surface. The adsorption parameters of the investigated compounds have been computed in absence and presence of Cu(II) at differentpH values. The results are compared with the behaviour of xanthine.

---

Vergleichende Untersuchungen zur Adsorption und Assoziation von 3-Methylxanthin und 7-Methylxanthin an einer geladenen Grenzfläche

Zusammenfassung Eine systematische vergleichende Untersuchung zur Adsorption und Assoziation von 3-Methylxanthin (3MXan) und 7-Methylxanthin (7MXan) an Quecksilber-Lösungs-Grenzflächen wurde mittels AC-Voltammetrie in sauren, neutralen und basischen Pufferlösungen durchgeführt. Oberhalb einer bestimmten Grenzkonzentration kommt es durch Wechselwirkungen zwischen vertikal angeordneten3MXan-Molekülen zu einer langsamen Reorientierung umE _ecm, was zu einer senkrechten Anordnung führt. Die Assoziation von7MXan ist gehindert und erlaubt daher keine ausgeprägten Basen-Basen-Wechselwirkungen. Die erhöhte Oberflächenaktivität von3MXan gegenüber7MXan resultiert aus der unterschiedlichen Stellung der Methylgruppe am Purinrest. Der Effekt einiger zweiwertiger Metallionen auf die Adsorption und Assoziation von3MXan und7MXan wurde untersucht. Die Ergebnisse weisen auf eine Begünstigung der Wechselwirkungen hin; die Bildung von vertikal angeordneten Grenzschichten an der Elektrodenoberfläche sollte daher im Fall vonM(II)-Mxan-Komplexen erleichtert sein. Die Adsorptionsparameter der untersuchten Verbindungen wurden in Abwesenheit und in Gegenwart von Cu(II) bei verschiedenenpH-Werten berechnet. Die Ergebnisse werden mit dem Verhalten von Xanthin verglichen.