Novel Cyanoketene N,S‐Acetals and Pyrazole Derivatives using Potassium 2‐Cyanoethylene‐1‐thiolates

Novel ketene N,S‐acetals 3 were readily prepared by the reaction of cyanoacetamide or cyanothioacetamide with phenylisothiocyanate in the presence of potassium hydroxide, followed by alkylation of the produced salts with methyl iodide. The reaction of compounds 3 with hydrazines afforded different substituted pyrazoles 6.     

Synthesis and antitumor activity evaluation of some 1, 2, 4-triazine and fused triazine derivatives

Reactions of 3-hyrazino-5,6-diphenyl-1,2,4-triazine with various carbonyl compounds such as ethyl acetoacetate, acetylacetone, benzoin, isatin, phthalic anhydride, phenyl isocyanate and acetic anhydride were discussed. Its reactions with α, β unsaturated compounds such as arylidinemalononitrile, diethyl acetylenedicarboxylate, dibenzylidine hydrazine were studied. These reactions led to the formation of various triazine and fused-triazine derivatives. The antitumor activity of the synthesized compounds was tested against HePG2 and MCF-7 cell lines. Some of the tested compounds were most active, whereas other compounds exhibited little or no activity.     

Structure and Polymorphism of M(thd)3 (M = Al,Cr, Mn,Fe, Co,Ga, and In)

Formation, crystal structure, polymorphism, and transition between polymorphs are reported for M(thd)₃, (M = Al, Cr, Mn, Fe, Co, Ga, and In) [(thd)^– = anion of H(thd) = C₁₁H₂₀O₂ = 2, 2, 6, 6‐tetramethylheptane‐3, 5‐dione]. Fresh crystal‐structure data are provided for monoclinic polymorphs of Al(thd)₃, Ga(thd)₃, and In(thd)₃. Apart from adjustment of the M–O_k bond length, the structural characteristics of M(thd)₃ complexes remain essentially unaffected by change of M. Analysis of the M–O_k, O_k–C_k, and C_k–C_k distances support the notion that the M–O_k–C_k–C_k–C_k–O_k– ring forms a heterocyclic unit with σ and π contributions to the bonds. Tentative assessments according to the bond‐valence or bond‐order scheme suggest that the strengths of the σ bonds are approximately equal for the M–O_k, O_k–C_k, and C_k–C_k bonds, whereas the π component of the M–O_k bonds is small compared with those for the O_k–C_k, and C_k–C_k bonds. The contours of a pattern for the occurrence of M(thd)₃ polymorphs suggest that polymorphs with structures of orthorhombic or higher symmetry are favored on crystallization from the vapor phase (viz. sublimation). Monoclinic polymorphs prefer crystallization from solution at temperatures closer to ambient. Each of the M(thd)₃ complexes subject to this study exhibits three or more polymorphs (further variants are likely to emerge consequent on systematic exploration of the crystallization conditions). High‐temperature powder X‐ray diffraction shows that the monoclinic polymorphs convert irreversibly to the corresponding rotational disordered orthorhombic variant above some 100–150 °C (depending on M). The orthorhombic variant is in turn transformed into polymorphs of tetragonal and cubic symmetry before entering the molten state. These findings are discussed in light of the current conceptions of rotational disorder in molecular crystals.     

Finding optimal finite field strengths allowing for a maximum of precision in the calculation of polarizabilities and hyperpolarizabilities

The finite field method, widely used for the calculation of static dipole polarizabilities or the first and second hyperpolarizabilities of molecules and polymers, is thoroughly explored. The application of different field strengths and the impact on the precision of the calculations were investigated. Borders could be defined and characterized, establishing a range of feasible field strengths that guarantee reliable numerical results. The quality of different types of meshes to screen the feasible region is assessed. Extrapolation schemes are presented that reduce the truncation error and allow to increase the precision of finite field calculations by one to three orders of magnitude. © 2013 Wiley Periodicals, Inc.     

Removal of Cyanide from Aqueous Solutions by Adsorption on Activated Carbon Prepared from Lignocellulosic By-products

Cyanide is considered one of the most dangerous compounds for the environment. They are discharged by various industries: chemical and metallurgical processes (extraction of gold and silver) and food industries. Adsorption is among the most used processes for elimination of cyanides particularly for the low concentrations. In this work, the cyanide removal is carried out by adsorption onto activated carbons prepared from olive stones and coffee ground. So we can promote this by-product as an inexpensive adsorbent. The prepared activated carbons are characterized by scanning electron micrograph and by determination of the physicochemical properties and specific surface area. All the adsorption experiments were performed in batch mode on synthetic water cyanide (KCN) at pH 10.8–11.0 to avoid volatilization of very toxic HCN. To describe the adsorption kinetics, the kinetic models of pseudo-first-order, pseudo-second-order, and intra-particle diffusion were applied. The experimental equilibrium data for adsorption of free cyanide were analyzed by the Langmuir, Freundlich, and Temkin isotherm models.     

Studies on the Uptake of Rare Earth Elements on Polyacrylamidoxime Resins from Natural Concentrate Leachate Solutions

Synthesis of poly(acrylamidoxime) resin from polyacrylonitrile performed with different crosslinking ratios 2, 5, and 10 wt% of divinylbenzene as crosslinking agent, using methylbenzoate and dioctylphthalate as pore producing solvent, the reaction mixture occurred under nitrogen. Studies carried out on diluted solution from rare earth elements (REEs) concentrate contains impurities as Cu²⁺, Ni²⁺, Zn²⁺, Fe³⁺, Al³⁺, Si⁴⁺, Th⁴⁺, U⁶⁺, Ca²⁺, and K⁺. Changing some parameters as pH of the solution, time of feeding and type of acid as HCl, HNO₃, H₂SO₄. The adsorption efficiency of resin is in the order pH 6 > pH 5 > pH 4 > pH 2 with excluding pH 6 due to the precipitation of some of REEs with the impurities and complete precipitation of Dy ion during pH adjustment, the adsorption in HNO₃ > HCl > H₂SO₄ media.     

Application of New Modified Poly(ethylene Oxide)-Block-Poly(propylene oxide)-Block-Poly(ethylene oxide) Copolymers as Demulsifier for Petroleum Crude Oil Emulsion

Water soluble nonionic amphiphilic block copolymers based on hydrophilic poly(ethylene glycol) (PEG) and hydrophobic poly(propylene glycol) (PPG) were prepared. Poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) copolymers, PEG-PPG-PEG, were prepared in the normal condition. The chemical composition and molecular weights of the prepared copolymers were determined from ¹H NMR and GPC techniques. The surface properties of the prepared surfactants were determined by measuring the surface tension at different temperatures. The prepared nonionic surfactants were evaluated as demulsifiers for water in crude-oil emulsions that were pronounced at different ratios of crude oil: water at 318 K and 333 K. The experimental results showed that the dehydration rate of the prepared demulsifiers reached 100% based on demulsifier chemical compositions and concentrations.     

Liquid crystalline polymers V. Thermotropic liquid crystalline poly(azomethine-ether)s containing a cycloalkanone moiety in the polymer backbone

A new homologous series of thermotropic liquid crystalline poly(azomethine-ether)s was synthesized by solution polycondensation of various diformyl-alpha,omega-diphenoxyalkanes, I-VIII with 2,5-bis(m-aminobenzylidene)cyclopentanone, XI and 2,6-bis(m-aminobenzylidene)cyclohexanone, XII. The inherent viscosities of the polymers were in the range 0.34-0.75 dI g^-1. The mesomorphic properties were studied as a function of the diphenoxyalkane spacer length. Analyses by DSC and optical polarized microscopy demonstrated that the poly(azomethine-ether)s form nematic mesophases over wide temperature ranges. The poly(azomethine-ether)s based on the cyclohexanone moiety had better thermal stabilities than the corresponding poly(azomethine-ether)s based on cyclopentanone.     

Mesophase behaviour of laterally di-fluoro-substituted four-ring compounds

Four new groups of the di-fluoro-substituted 4-(2′-(or 3′)-fluoro phenylazo)-2-(or 3-) fluoro phenyl-4″-alkoxyphenylazo benzoates (In–IVn) were prepared and investigated for their mesophase behaviour. An alkoxy group of variable chain length (n = 6, 10 and 14 carbons) is attached to the terminal phenylazo benzoate moiety, and two lateral fluoro substituents are attached individually with different orientations to the other two adjacent rings. The molecular structures of the prepared compounds were confirmed by Fourier transform infrared spectroscopy and ¹H NMR spectroscopy. The study aims to investigate the steric effect of the spatial orientation and relative positions of the two lateral fluorine atoms on the mesomorphic properties in their pure states. The mesophase behaviour was investigated via differential scanning calorimetry and mesophases were identified by polarised light microscopy. The investigation shows that these compounds exhibit high enantiotropic mesophases (SmC and N) and broad mesophase temperature range. The type and stability of the mesophase depends on the length of the terminal alkoxy chain and the position the two fluoro substituents. A comparison between these investigated compounds with their corresponding three-ring analogues was discussed.     

Preparation,characterization and applications of polyurethane foam functionalized with resorcinol for quantitative separation and determination of silver(I) and mercury(II) from tap and wastewater

A stable chelating resin matrix was prepared by covalently linking resorcinol with polyurethane foam matrix through a –N=N– group. Preconcentration and determination of trace Ag⁺ and Hg²⁺ ions from samples of different origin, using Res-PUF, were studied. Various conditions influencing the sorption of these metal ions onto Res-PUF were optimized. The kinetics of sorption of the Ag⁺ and Hg²⁺ by Res-PUF were found to be fast, reached equilibrium in few minutes (5–10?min) and followed a first-order rate equation with an overall rate constant k in 0.102 and 0.267/min, respectively. Study of the variation of the sorption of the tested metal ions with temperature yielded average values for ΔG, ΔH and ΔS of ?3.94, ?22.02 and ?58.37, respectively. The mean free sorption energy (E) computed from the Dubinin–Radushkevich (D–R) isotherm was found to be equal to 8.91 kJ/mol, which reflects the chelation sorption process. The capacities of the foam material were 0.15 and 0.07?mmol/g for Ag⁺ and Hg²⁺, respectively. Preconcentration factors of?>?50 were achieved (RSD?≈?5.99). The proposed preconcentration procedure was applied successfully to the determination of trace metal ions in natural and wastewater samples.