10-GHz Optical Comb in L-Band Region With Brillouin/Erbium-Doped Fibre Laser

A multiwavelength Brillouin/erbium fibre laser (BEFL) which operates in the long wavelength (L-band) region is demonstrated for potential applications in an L-band wavelength division multiplexing (WDM) communication system. The laser configuration consists of a long erbium-doped fibre to enable L-band amplification where two 3-dB couplers take a portion of the generated BEFL signal and re-inject it into the single mode fibre to seed a cascaded BEFL line in the same direction as the first BEFL line. A stable and strong laser comb of up to five lines with 10-GHz spacing has been obtained with a Brillouin pump (BP) of 9.2 mW and a 980 nm pump of 92 mW. The BEFL has shown a broad tuning range with a tuning characteristic for line #1 which is flat over a range greater than 9.9 nm.     

Simple regge pole model for the reactionπ − p →η’n

The most recently measured differential cross-section data forπ ⁻ p → η’n has been fitted by using a simple Regge pole model with phenomenological residue functions. It has also been observed that this inelastic process has the scaling property.     

Application of Euler Neural Networks with Soft Computing Paradigm to Solve Nonlinear Problems Arising in Heat Transfer

In this study, a novel application of neurocomputing technique is presented for solving nonlinear heat transfer and natural convection porous fin problems arising in almost all areas of engineering and technology, especially in mechanical engineering. The mathematical models of the problems are exploited by the intelligent strength of Euler polynomials based Euler neural networks (ENN’s), optimized with a generalized normal distribution optimization (GNDO) algorithm and Interior point algorithm (IPA). In this scheme, ENN’s based differential equation models are constructed in an unsupervised manner, in which the neurons are trained by GNDO as an effective global search technique and IPA, which enhances the local search convergence. Moreover, a temperature distribution of heat transfer and natural convection porous fin are investigated by using an ENN-GNDO-IPA algorithm under the influence of variations in specific heat, thermal conductivity, internal heat generation, and heat transfer rate, respectively. A large number of executions are performed on the proposed technique for different cases to determine the reliability and effectiveness through various performance indicators including Nash–Sutcliffe efficiency (NSE), error in Nash–Sutcliffe efficiency (ENSE), mean absolute error (MAE), and Thiel’s inequality coefficient (TIC). Extensive graphical and statistical analysis shows the dominance of the proposed algorithm with state-of-the-art algorithms and numerical solver RK-4.     

Synthesis,Characterization, and Magnetic Behavior of Cobalt-Ferrite Nanoparticles under Variant Temperature Conditions

Physics of the Solid State - Wet chemical method was applied for the synthesis of cobalt-ferrite nanoparticles. The physicochemical properties were investigated by number of analytical techniques....     

Study of Nonlinear Models of Oscillatory Systems by Applying an Intelligent Computational Technique

In this paper, we have analyzed the mathematical model of various nonlinear oscillators arising in different fields of engineering. Further, approximate solutions for different variations in oscillators are studied by using feedforward neural networks (NNs) based on the backpropagated Levenberg–Marquardt algorithm (BLMA). A data set for different problem scenarios for the supervised learning of BLMA has been generated by the Runge–Kutta method of order 4 (RK-4) with the “NDSolve” package in Mathematica. The worth of the approximate solution by NN-BLMA is attained by employing the processing of testing, training, and validation of the reference data set. For each model, convergence analysis, error histograms, regression analysis, and curve fitting are considered to study the robustness and accuracy of the design scheme.     

High Pressure High Temperature Dynamic Rheometry of Sulfonated Polyacrylamide Solutions in Electrolyte Media as Used for Oil Recovery Applications

Sulfonated polyacrylamide (SPAA) solutions were prepared and the effects of pressure, polymer concentration, and water temperature, pH and salinity on their rheological behavior were investigated using a concentric cylinder dynamic rheometer equipped with a high pressure cell. According to the rheological flow curves the shear stress of SPAA solutions increased less than in proportion to their shear rates; that is, a shear thinning effect occurred. For polymer solutions containing 15,000 ppm of SPAA, shear viscosity, and stress were nearly insensitive to pressure. However, the shear viscosity and stress of SPAA solutions were affected by temperature and this effect was more evident at lower pressure. The flow curves indicated the shear viscosity and stress of the samples increased with increasing SPAA concentration and pH of the water, but were decreased with increasing water salinity and temperature.     

Transfer of radioactivity from soil to vegetation in Rechna Doab,Pakistan

In Rechna Doab, samples of the most common vegetation, perennial grass Desmostachya bipinnata (dab), were collected along with soil samples from 29 sites. Natural radioactivity of ²²⁶Ra, ²³²Th/²²⁸Ac and ⁴⁰K was measured by using high purity germanium-based gamma ray spectrometer. Activity concentration levels of ²²⁶Ra, ²³²Th/²²⁸Ac and ⁴⁰K in soil were found to be 46.8±6.2 (36.0–57.6), 61.4±5.9 (48.2–73.2) and 644.8±73.9 (537.7–868.4) Bq kg^?1 (dry mass), respectively, and those in vegetation were 2.74±1.70 (1.00–6.39), 2.24±0.59 (1.56–2.61) and 172.72±113.37 (53.14–469.24) Bq kg^?1 (dry mass), respectively. The measured values of the activity concentration in vegetation are comparable with some other international data. Calculated soil to vegetation transfer factors of ²²⁶Ra, ²²⁸Ac and ⁴⁰K were 0.06±0.03 (0.02–0.14), 0.04±0.01 (0.03–0.04) and 0.26±0.16 (0.09–0.69). The mean outdoor absorbed dose rate in air for the area under study was determined as 8.22 nGy h^?1 and the mean indoor absorbed dose rate in air was 11.52 nGy h^?1. The total annual effective dose to the general public from the vegetation was found to be (0.02–0.16) mSv, which is below the recommended limit value of 1 mSv y^?1 for the general public. The dab vegetation under study was found to be radiologically safe for the population and environment.