Pinacol-Pinacolone Rearrangement of 1, 2-Di-(p-methoxyphenyl)-ethane-1, 2-diol and Bis-(4-methoxyphenyl)-acetaldehyde in Acid Media

1, 2-Di-(p-methoxyphenyl)-ethane-1, 2-diol gave in acid media bis-(4-methoxy-phenyl)-acetaldehyde, 4-4′-dimethoxy-deoxybenzoin, and 1, 2-di-(p-methoxyphenyl)-ethylene oxide; their respective yields being influenced by at least 3 factors: (i) the acid, (ii) its concentration, and (iii) the reaction period. Bis-(4-methoxyphenyl)-acetaldehyde rearranged to the deoxybenzoin in boiling sulfuric (50%) or phosphoric (75%) acids (w/w), and to two isomeric 1, 2-diacetoxy-1, 2-di-(p-methoxyphenyl) ethanes when it was heated with acetic anhydride. The mechanisms of these reactions are discussed.     

Dynamics of molecular oxygen in micellar solutions

Fluorescence quenching by molecular oxygen has been employed to estimate dynamic parameters and solubility characteristics of molecular oxygen in micelle forming detergent solutions. A kinetic model which assumes that oxygen quenching occurs only in the micellar phase is employed to analyze the data.     

A study of simultaneous photolysis and photoaddition reactions of riboflavin in aqueous solution

The photodegradation reactions of riboflavin (RF) in the presence of 0.05-2.00 M phosphate (pH 7.0) have been studied using a specific multicomponent spectrophotometric method. The reactions involve simultaneous photolysis (intramolecular photoreduction) and photoaddition (intramolecular photoaddition) leading to lumichrome (LC) and cyclodehydroriboflavin (CDRF), respectively, as major products. The contribution of each reaction in the overall photodegradation depends upon the phosphate concentration, i.e., higher the phosphate concentration higher the extent of photoaddition. The apparent first-order rate constants for the photodegradation of RF and for the formation of LC and CDRF at 0.25-2.00 M phosphate concentration range from 0.65 to 3.03 x 10(-2), and from 0.41 to 0.99 x 10(-2) and 0.12 to 1.63 x 10(-2) min(-1), respectively. The second-order rate constants for the phosphate catalysed photodegradation of RF and for the formation of LC and CDRF are 2.12 x 10(-4) and 0.61 x 10(-4) and 1.41 x 10(-4) M(-1)s (-1), respectively. Since the formation of CDRF by photoaddition is catalysed by HPO(4)(2-) ions, it is suggested that H(2)PO(4)(-) ions may be involved in the formation of LC by photolysis. Thus, both H(2)PO(4)(-) and HPO(4)(2-) ions may catalyse the two major reaction pathways of riboflavin photodegradation, respectively.     

Reaction of Cα,O-dilithiooximes with functionalized carbonyl compounds. Part 2 . Reaction with α-chloroketones and α,β-unsaturated aldehydes and ketones

The reaction of Cα,O-Dilithiooximes 2 and α-chloroketones afforded 5-(hydroxymethyl)-Δ²-soxazolines 4 . α,β-Unsaturated aldehydes and ketones reacted with 2 to give the corresponding acyclic 1,2-addition products 5 . The latter were cyclized with phosphorus pentoxide to 5-vinyl-Δ²-isoxazolines 6 .     

Effects of humidity and temperature during irradiation on the response of blue PMMA dosimeter

Effects of relative humidity conditions in the irradiation chamber and of temperature of the chamber on the response of 3 mm thick light blue poly (methyl methacrylate) sheets have been studied. The response was measured spectrophotometrically at 402, 450, 596 and 612 nm. The response of the dosimeter is independent of the relative humidity (12–97%) during irradiation if the response is measured within 24 h of irradiation. If the response is measured after longer storage time, the absorbance at 402 and 450 nm increases significantly. At these two wavelengths the response of the dosimeter is also independent of the temperature of the irradiation chamber in the range of 0 to 40 °C. However, at higher temperatures (60, 80 °C), the response is not uniform.     

Enhancement of distillate selectivity in Fischer-Tropsch synthesis by using iron and cobalt catalysts in a novel dual-bed reactor ?

Summary An integrated process for producing liquid fuels from synthesis gas via a two-stage Fischer-Tropsch (FT) reaction is disclosed. An iron catalyst was used in the first bed of a fixed-bed reactor followed by a ruthenium promoted cobalt catalyst in the second bed. The activity and selectivity of the dual-bed system were assessed and compared with those using catalysts in a single bed system, separately. The methane selectivity in the dual-bed reactor was about 11% less compared to that of the single-bed system. The C₅⁺ selectivity for the dual-bed reactor was 19.7% higher than that of the single-bed system.     

INAA of toxic elements in coal and their transfer into environments

An instrumental neutron activation analytical (INAA) technique is described for the determination of 26 toxic and other trace elements in Eastern Coal (NBS SRM-1632a), local coal and its ash. The coal ash was produced by heating coal at 750°C in a muffled furnace. The transfer of these elements to the environment on the complete compustion of coal is estimated from the difference between the elemental concentration of coal and its ash.     

Analysis of neem oils by LC–MS and degradation kinetics of azadirachtin-A in a controlled environment

Since it was first isolated, the oil extracted from seeds of neem (Azadirachtin indica A juss) has been extensively studied in terms of its efficacy as an insecticide. Several industrial formulations are produced as emulsifiable solutions containing a stated titer of the active ingredient azadirachtin-A (AZ-A). The work reported here is the characterization of a formulation of this insecticide marketed under the name of Neem-azal T/S and kinetic studies of the major active ingredient of this formulation. We initially performed liquid–liquid extraction to isolate the neem oil from other ingredients in the commercial mixture. This was followed by a purification using flash chromatography and semi-preparative chromatography, leading to ¹³C NMR identification of structures such as azadirachtin-A, azadirachtin-B, and azadirachtin-H. The neem extract was also characterized by HPLC–MS using two ionization sources, APCI (atmospheric pressure chemical ionization) and ESI (electrospray ionization) in positive and negative ion modes of detection. This led to the identification of other compounds present in the extract—azadirachtin-D, azadirachtin-I, deacetylnimbin, deacetylsalannin, nimbin, and salannin. The comparative study of data gathered by use of the two ionization sources is discussed and shows that the ESI source enables the largest number of structures to be identified. In a second part, kinetic changes in the main product (AZ-A) were studied under precise conditions of pH (2, 4, 6, and 8), temperature (40 to 70 °C), and light (UV, dark room and in daylight). This enabled us to determine the degradation kinetics of the product (AZ-A) over time. The activation energy of the molecule (75±9 kJ mol^–1) was determined by examining thermal stability in the range 40 to 70 °C. The degradation products of this compound were identified by use of HPLC–MS and HPLC–MS–MS. The results enabled proposal of a chemical degradation reaction route for AZ-A under different conditions of pH and temperature. The data show that at room temperature and pH between 4 and 5 the product degrades into two preferential forms that are hydrolyzed to a single product over time and as a function of pH change.     

Microwave-assisted efficient synthesis of spiro-fused heterocycles under solvent-free conditions

Spiro-fused heterocycles were synthesized in good to high yields by a pseudo four-component reaction of an aldehyde, urea and a cyclic β-diester or a β-diamide such as Meldrum’s acid or barbituric acid derivatives using microwave irradiation under solvent-free conditions.     

Depolymerization Study of Pakistani Lignite Coal Influence of Pre‐treatments on Product Slate

Influence of pretreatments, i.e., demineralization and pre‐soaking in some solvents on the yields of liquefied products obtained from hydro‐depolymerization of Pakistani coal in a pool of hydrogen has been discussed. Results of hydrogenation experiments demonstrated that demineralizing the coal sample prior to liquefaction caused the yields to decrease compared with the virgin coal samples. The contribution of mineral matter of coal has been evaluated by comparing the yields of liquid products of virgin and leached samples. Increase in the yields obtained from the hydrogenation experiments of swollen coal samples was not satisfactorily significant.