Preparation of an experimental glass-ionomer cements and evaluation of their properties

The preparation of glass-ionomer cements based on the composition of SiO₂–Al₂O₃–CaO–SrO–F and evaluation of their properties is described. Cements were prepared via the sol–gel method and characterized by XRD, BET, SEM, and EDAX analysis. The effect of various concentrations of Sr on in vitro bioactivity of the glass speciments was investigated. In vitro bioactivity of the samples was evaluated by soaking them in simulated body fluid followed by structural characterization using SEM and atomic absorption analysis. A glass specimen with 0.5 mol of Sr exhibited appropriate bioactivity.     

Novel Azobenzene-Functionalized Polyelectrolytes of Different Substituted Head Groups 2: Control of Surface Wetting in Self-Assembled Multilayer Films

A novel set of light-responsive polyelectrolytes has been developed and studied, to control and tune surface wettability by introducing various types of substituted R head-groups of azo polyelectrolytes in self-assembled multilayer (SAMU) films. As part of a larger project to develop polymer surfaces where one can exert precise control over properties important to proteins and cells in contact, photo-reversibly, we describe here how one can tune quite reliably the contact angle of a biocompatible SAMU, containing a photo-reversible azo chromophore for eventual directed cell growth. The azo polyelectrolytes described here have different substituted R head-group pairs of shorter-ionized hydrophilic COOH and SO₃H, shorter non-ionized hydrophobic H and OC₂H₅, and larger non-ionized hydrophobic octyl C₈H₁₇ and C₈F₁₇, and were employed as polyanions to fabricate the SAMU onto silicon substrates by using the counter-charge polycation PDAC. The prepared SAMU films were primarily characterized by measurement of their contact angles with water. The surface wetting properties of the thin films were found to be dependent on the type of substituted R-groups of the azo polyelectrolytes through their degree of ionization, size, hydrophobicity/hydrophilicity, solubility, conformation, and inter-polymeric association and intra-polymeric aggregation. All these factors appeared to be inter-related, and influenced variations in hydrophobic/hydrophilic character to different extents of aggregates/non-aggregates in solution because of solvation effects of the azo polyanions, and were thus manifested when adsorbed as thin films via the SAMU deposition process. For example, one interesting observation is significantly higher contact angles of 79° for SAMU films of larger octyl R groups of PAPEA-C₈F₁₇ and PAPEA-C₈H₁₇ than for others with contact angles of 64° observed for non-polar R-groups of OC₂H₅ and H. Furthermore, lower contact angle values of 59° for SAMU films with polar R-groups of COOH and SO₃H relative to that of non-polar R-groups are in accordance with their expected order of the hydrophilicity or hydrophobicity. It is possible that the large octyl groups are more effective in shielding the ionic functional groups on the substrate surface, and contributed less to the water drop-molecule interactions with ionic groups of the PDAC and/or AA groups. In addition, higher hydrophobicity of the SAMU films may be due to the incorporation of bulky and hydrophobic groups in these polyelectrolytes, which can produce aggregates on the surfaces of the SAMU films. Through understanding and controlling the complex aggregation behavior of the different substituted R-groups of these azo polyelectrolytes, and hence their adsorption on substrates, it appears possible to finely tune the surface energy of these biocompatible films over a wide range, enhance the photo-switching capabilities of the SAMU films, and tailor other surface properties for the development and application of new devices in diverse areas of microfluidics, specialty coatings, sensors, and biomedical sciences.     

钒取代的杂多酸催化一锅四组分Dakin-West反应合成β-乙酰氨基酮(英文)

The multicomponent condensation of an aryl aldehyde,acetyl chloride,acetonitrile,and enolizable ketone as one-pot synthesis of β-acetamido ketones in high yields was investigated using commercial,non-corrosive,and environmentally benign Keggin and Wells-Dawson heteropolyacid catalysts.The best catalyst was H5PW10V2O40.The methodology used simple experimental conditions,and the short reaction times and high yields indicate it is a useful strategy for the large scale synthesis of β-acetamido ketones.     

Catalyst-free,aqueous and highly diastereoselective synthesis of new 5-substituted 1H-tetrazoles via a multi-component domino Knoevenagel condensation/1,3 dipolar cycloaddition reaction

An approach for the synthesis of new 5-substituted-tetrazoles via multi-component domino Knoevenagel condensation/1,3 dipolar cycloaddition reaction of carbonyl compounds, malononitrile and sodium azide in water without assistance of any catalyst has been reported. This general protocol provides a wide variety of 5-substituted 1H-tetrazoles in good yields under mild reaction conditions.     

Cobalt(II)-selective membrane electrode based on N,N′-di(thiazol-2-yl)formimidamide

A new PVC-membrane electrode for Co²⁺ ions based on N,N′-di(thiazol-2-yl)formimidamide (TF) as membrane carrier has been developed. The electrode resulted in Nernstian response (29.5?±?0.4?mV decade^?1) for Co²⁺ ion over a wide concentration range (2.5?×?10^?7 ?1.0?×?10^?1?M) with a detection limit of 6.1?×?10^?8?M. The sensor has a response time of about 10?s, and can be used for at least 2 months without observing any deviation from the Nernstain response. The electrode revealed good selectivity towards cobalt(II) ion over a wide variety of alkali, alkaline earth, transition, and heavy metal ions and could be used in the pH range 2.0–7.0. The electrode was used for determination of Co²⁺ in real samples.     

A computational investigation of carbon-doped beryllium monoxide nanotubes

To investigate the influence of C-doping on the electrostatic structure properties in the frame work of density functional theory (DFT), we considered beryllium monoxide nanotubes (BeONTs), consisting of 60 Be and 60 O atoms. Full geometry optimizations are performed for all structures, i.e., all atoms are allowed to relax. Afterwards, the chemical shielding (CS) tensors are calculated for Be-9, O-17 and C-13 nuclei in the C-doped forms and also pristine models of the (10, 0) zigzag and (5, 5) armchair BeONTs. Formation energies indicate that C-doping of Be atom (CBe form) could be more favorable than C-doping of O atom (CO form) in both zigzag and armchair BeONTs. Gap energies and dipole moments detected the effects of dopant in the (5, 5) armchair models; however, those parameters did not indicate any significant changes in the C-doped (10, 0) zigzag BeONT models. The results show that the CS values for the Be and O atoms-contributed to the Be-C bonds or those atoms close to the C-doped region-in the CO form of BeONTs (zigzag and armchair) are changed. The same values only for the O atoms-contributed to the O-C bonds- in the CBe form of BeONTs (zigzag and armchair) are changed.     

Do we know the mass of a black hole? Mass of some cosmological black hole models

Using a cosmological black hole model proposed recently, we have calculated the quasi-local mass of a collapsing structure within a cosmological setting due to different definitions put forward in the last decades to see how similar or different they are. It has been shown that the mass within the horizon follows the familiar Brown–York behavior. It increases, however, outside the horizon again after a short decrease, in contrast to the Schwarzschild case. Further away, near the void, outside the collapsed region, and where the density reaches the background minimum, all the mass definitions roughly coincide. They differ, however, substantially far from it. Generically, we are faced with three different Brown–York mass maxima: near the horizon, around the void between the overdensity region and the background, and another at cosmological distances corresponding to the cosmological horizon. While the latter two maxima are always present, the horizon mass maxima is absent before the onset of the central singularity.     

An efficient,expeditious, and diastereoselective one-pot pseudo-five-component reaction for the synthesis of new bis-Betti bases under catalyst-free conditions

A novel, diastereoselective, one-pot synthesis of new bis-Betti bases via condensation of dihydroxynaphthalene, two equivalents of aryl aldehydes, and two equivalents of 3-amino-5-methylisoxazole is reported. Conversion into the adducts was almost quantitative without the use of solvent or catalyst. The reaction conditions are very simple and enable easy isolation of the product.     

Reaction in Dry Media: Silica Gel Supported Ferric Chloride Catalyzed Synthesis of 1,8-Dioxo-octahydroxanthene Derivatives

Herein, we describe a green procedure for the one-pot preparation of 1,8-dioxo-octahydroxanthene derivatives by condensation of dimedone and substituted benzaldehydes in the presence of FeCl ₃ -SiO ₂ as an efficient and heterogeneous catalyst under microwave irradiation and thermal conditions. This method has the advantages of high yields, cleaner reactions, efficient and cost-effective method, simple methodology, short reaction times, easy workup, and greener conditions.     

One-Pot Stereoselective Synthesis of Alkyl Z-2-[2-Amino-4-oxo-1,3-selenazol-5(4H)-yliden] Acetates

Abstract

Selenourea reacts with dialkyl acetylenedicarboxylates in acetone to form 1:1 adducts, which undergo a cyclization reaction to produce alkyl Z-2-(2-amino-4-oxo-1,3-selenazol-5(4H)-yliden) acetates in fairly good yields. The reaction is completely stereoselective.