A chemo-enzymatic route to diastereoisomers of 2-methyl-1-phenyl-1,3-butanediol: the dual role of microorganisms

Diastereoisomers (1S,2R,3S)-, (1R,2R,3S)-, (1R,2S,3S)- and (1S,2S,3S)-2-methyl-1-phenyl-1,3-butanediols were prepared by simple and convenient strategies using two different chemo-enzymatic approaches for the reduction of racemic 2-methyl-1-phenyl-1,3-butanedione, both involving in situ racemization. The first method comprised a one-pot microbial reduction coupled with a chemical reduction, while in the second method, stepwise chemo-enzymatic reductions were performed.     

Thermal decomposition of basic cobalt and copper carbonates

Basic cobalt and copper carbonates were prepared by precipitation from solutions of their nitrates using KHCO₃ at room temperature in CO₂ atmosphere. The thermal decomposition of the prepared basic carbonates was studied by means of TG and DTA techniques and the phases produced were identified by XRD measurements. The products obtained at 400C were subjected to different doses of gamma-rays (40–160 M rad) and the thermal stabilities of these solids were investigated.The results obtained revealed that basic cobalt carbonate decomposed at 335C to produce Co₃O₄ which remained stable up to 850 and then decomposed above this temperature giving CoO which transformed into Co₃O₄ on cooling to room temperature. Basic copper carbonate dissociated at 290C yielding CuO which yielded Cu₂O and metallic copper at 1060 and 1150C, respectively. However, the produced cuprous oxide and metallic copper solids were converted into CuO and CU₂O, respectively by cooling in air to room temperature.Gamma-irradiation decreased the thermal stability of Co₃O₄ to an extent proportional to the dose employed. On the other hand, this treatment increased the thermal stability of both CuO and Cu₂O.     

The synthesis and ligand properties of the dihydro-bis-(1-indazolyl)borate anion

Summary Potassium dihydro-bis-(1-indazolyl)borate, synthesized from potassium borohydride and indazole, has been used as a reagent to yield complexes with copper(II), nickel(II), cobalt(II), manganese(II) and iron(III) ions. From i.r. spectral studies the ligand is uninegative and bidentate and coordination occurs through the nitrogen atom at position 2 of the indazole ring system in all cases. With the sole exception of the copper(II) complex, the nitrogen atom at position 1 is also involved in forming a bridge with an adjacent metal ion. On the basis of electronic spectral studies and magnetic susceptibility measurements a distorted square planar structure involving chlorine bridges has been proposed for the copper complex. An octahedral geometry with ligand bridges for all complexes is tentatively proposed and it appears that all are polymers.     

Synthesis and tautomeric structure of 2-[N-aryl-2-oxo-2-arylethanehydrazonoyl]-6-methyl-4(3H)-pyrimidinones

Two series of 2-(N-aryl-2-oxo-2-arylethanehydrazonoyl)-6-methyl-4(3H)-pyrimidinones 11 (12) were prepared by coupling of diazotized anilines with 2-(aroylmethylene)-1,2-dihydro-6-methyl-4(3H)-pyrimidinones 2 (3). The spectral data of such compounds together with their 3-methyl analogs 13 (14) indicated that they exist predominantly in the hydrazone tautomeric form.     

Hyperfine structure studies of Tantalum

A narrow bandwidth ring dye laser pumped by an argon ion laser has been used to investigate the hyperfine structure of the even and odd parity levels of tantalum by optogalvanic spectroscopy in the wavelength range 5640 to 6050 Å. Seventeen transitions have been observed and eight of these have not been reported in the literature so far. These transitions involve 27 levels with 15 odd and 12 even parity configurations. The magnetic dipole hyperfine interaction constants A and the electric quadrupole interaction constants B for these levels have been computed and compared with the data available in literature. The results for the levels at 34799.71 cm^?1, 26960.46 cm^?1 and 19657.78 cm^?1 are reported for the first time.     

HPTLC Procedure for Determination of Levonorgestrel in the Drug-Release Media of an In-situ-Forming Delivery System

JPC – Journal of Planar Chromatography – Modern TLC -     

Studies with enaminones: The reaction of enaminones with aminoheterocycles. A route to azolopyrimidines,azolopyridines and quinolines

The enaminones 1b,d,f react with 4‐phenyl‐3‐methyl‐5‐pyrazoleamine 3a to yield the pyrazole derivatives 4a‐c that cyclised readily on reflux in pyridine solution in presence of hydrochloric acid to yield the pyrazolo[1,5‐a]pyrimidines 5a‐c. Similarly 3(5)‐amino‐1H‐triazole (3b) reacted with 1b,d,f to yield the triazolo[1,5‐a]pyrimidines 5d‐f. In contrast attempted condensation of the 5‐tetrazoloamine (3c) with 1a,d,e resulted in its trimerisation and only triaroylbenzene 8a,d,e was isolated. The reaction of 1a,b,d with anthranilonitrile 9a and the reaction of 1a‐c with the 2‐aminocyclohexene thiophene‐3‐nitrile 10a afforded the cis enaminones 11a‐c and 12a‐c. Similarly, reaction of 1a‐c with the methylanthranilate 9b and reaction of 1b,e with ethyl 2‐aminocyclohexene thiophene‐3‐carboxylate 10b afforded the cis enaminones 11d‐f and 12d,e respectively. Attempted cyclization of 11a‐c into quinoline failed. Successful cyclization of 11d into the quinolinone 13 could be affected, on heating for five minutes in a domestic microwave oven at full power. The reaction of 1a‐c,f with piperidine afforded the trans enaminones 14a‐d. Similarly, trans 14e was formed from the reaction of 1b with morpholine. The coupling reaction of 1b with excess of benzene diazonium chloride afforded the formazane 16. The enaminone 2 reacted with heterocyclic amines to yield the pyridones 17,18.     

Solvent extraction of lanthanum(III), europium(III) and lutetium(III) with fluorinated 1-phenyl-3-methyl-4-benzoyl-5-pyrazolones into chloroform

A series of chelating reagents, 1-phenyl-3-methyl-4-(2-fluorobenzoyl)-5-pyrazolone, 1-phenyl-3-methyl-4-(3-fluorobenzoyl)-5-pyrazolone and 1-phenyl-3-methyl-4-(4-fluorobenzoyl)-5-pyrazolone, has been synthesized. The extraction of Ln(III), (Ln = La, Eu and Lu) into chloroform with these reagents at 30 +/- 1 degrees has been studied. The composition of the complexes extracted has been determined by the slope method, and the extraction constants K(ex), were measured. The presence of the fluorine atom in the reagents does not make the K(ex), values much different from those obtained with the parent pyrazolone.     

Chemical, sensory and microbiological changes of gamma irradiated coconut cream powder

A study was carried out to determine optimum decontamination dose for a locally manufactured coconut cream powder. Samples were gamma irradiated (0–15 kGy) and ageing process was achieved using GEER oven at 60 °C for 7 days, which is equivalent to one-year storage at room temperature. Iodine value (IV), ranging from 4.8 to 6.4, was not affected by radiation doses and storage, however peroxide value and thiobarbituric acid (TBA) generally increased with radiation doses. In most samples, peroxide value (meq/kg) reduced after storage, whilst the TBA (mg malonaldehyde/kg), indicator for product quality, slightly increased. The sensory evaluation conducted using 25 taste panellists indicated that scores on odour, creamy taste and overall acceptance for all irradiated samples at more than 5 kGy were significantly lower (P<0.05) than the control. However, the panellists could not detect any significant differences among the irradiation doses (P>0.05). All stored products were significantly different in colour, creamy taste, odour and overall acceptance (P<0.05) when compared to the non-stored non-irradiated control. Microbiological count of the samples prior to irradiation was in the range of 1×10²–1.7×10³ cfu/g with no detection of Salmonella sp. and Escherichia coli. No microbial colonies were detected after irradiation. Based on the TBA and overall sensory acceptance, gamma irradiation of 5 kGy was found to be the optimum dose and lower doses can be considered to decontaminate coconut cream powder.     

Glycol-based sol-gel process for the fabrication of ferroelectric PZT thin films

A new sol-gel system using ethylene glycol was developed for the fabrication of PZT thin films with compositions near the morphotropic phase boundary Pb(Zr_0.52Ti_0.48)O₃. Ethylene glycol was used as both a chelating agent and a solvent to replace the highly toxic methoxyethanol used in previous formulations. Thin films were deposited by spin coating the solutions onto platinized silicon substrates. Films were completely crystallized by about 600°C and contained the ferroelectric perovskite phase. A dielectric constant of about 750–800 at 1 KHz was obtained for thin films of 0.3 µm thickness. The hysteresis measurements revealed a remanent polarization of 15 mC/cm² with a coercive field of 60 kV/cm.