Effects of pyrolysis temperatures on the textural,magnetic, morphology,and catalytic properties of supported nickel nanoparticles

The development of base metal catalysts for industrially important reactions continues to be an important goal of catalysis research. Herein, the effects of pyrolysis temperature on the textural, structural, surface, magnetics properties and catalytic properties of silica-supported nickel nanoparticles (NiNPs) were thoroughly investigated. Mono-dispersed NiNPs encapsulated in graphitic shells were first successfully obtained and were characterized using a variety of methods such as BET surface area measurement, CO-pulse chemisorption, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), high resolution transmission electron microscopy (HR-TEM), and superconducting quantum interference device (SQUID) measurement. The findings showed that all catalysts’ properties were considerably altered with change in pyrolysis temperature. Hydrogenation of diphenylacetylene was then selected as the model reaction for the evaluation of the catalytic performance of the graphitic-shelled NiNPs. After testing, pyrolysis of a nickel at 800 °C (catalyst A) displayed tremendous activity and selectivity to produce >94% of stilbene with selectivities of 99% for the Z-isomer.     

Switchable Q-switched and laser operating mode-locked erbium-doped fiber in the L-band region

We demonstrate a switchable Q-switched and mode-locked erbium-doped fiber laser （EDFL） operating in the L-band region using the nonlinear polarization rotation effect. The switching operation is achieved by controlling intensity-dependent loss using a polarization controller. In Q-switching mode, the EDFL produces a pulse train with a repetition rate of 21.1 kHz, pulse width of 7.7 #s, and pulse energy of 13.6 nJ. The EDFL also generates a multi-wavelength comb with a very narrow and constant wavelength spacing of 0.045 nm and optical signal-to-noise ratio of at least l0 dB. During mode locking, the EDFL produces stretched pulses with 3-dB bandwidth of 26.2 nm, pulse width of 350 fs, repetition rate of 2.38 MHz, and pulse energy of 48.56 pJ.     

A novel chaos control strategy for discrete-time Brusselator models

This article deals with the dynamical analysis of discrete-time Brusselator models. Euler’s forward and nonstandard difference schemes are implemented for discretization of Brusselator system. We investigate the local dynamics related to equilibria of both discrete-time models. Furthermore, with the help of bifurcation theory and center manifold theorem, explicit parametric conditions for directions and existence of flip and Hopf bifurcations are investigated. A novel chaos control method is implemented in order to control chaos in discrete-time Brusselator models under the influence of flip and Hopf bifurcations. Numerical simulations are provided to illustrate theoretical discussion and effectiveness of newly introduced chaos control strategy.     

Silver nanoparticles immobilized onto poly(4‐vinylpyridine)‐functionalized magnetic nanoparticles: A robust magnetically recyclable catalyst for oxidant‐free alcohol dehydrogenation

A heterogeneous and recyclable catalyst with a high loading of silver nanoparticles was synthesized via the silver nanoparticles being supported onto the surface of magnetic nanoparticles coated with poly(4‐vinylpyridine). The synthesized catalyst was used in the dehydrogenation of alcohols to corresponding carbonyl compounds. A broad diversity of alcohols was converted into their corresponding carbonyl compounds in excellent yields. The catalyst was easily recovered by applying an external magnetic field and reused for seven reaction cycles without considerable loss of activity. The catalyst was fully characterized using various techniques.     

Real-time quantification of Staphylococcusaureus in liquid medium using infrared thermography

We previously showed that infrared thermography (IRT) could be used to quantify viable Escherichiacoli, a representative gram-negative bacterium, in liquid growth media. Here, we evaluated the ability of IRT to enumerate a viable representative gram-positive organism, Staphylococcusaureus. We found that the energy content (EC) of the media was strongly positively correlated (r = 0.999) to measured viable counts of S.aureus ranging from 85 colony-forming units (CFU)/ml to ∼4 × 10⁸ CFU/ml. The EC of S.aureus was ∼2-fold higher than that of E.coli at comparable cell concentrations suggesting that IRT may be used to distinguish genera.     

Lack of anomalous diffusion in linear translationally-invariant systems determined by only one initial condition

It is shown that as far as the linear diffusion equation meets both time- and space-translational invariance, the time dependence of a moment of degree α is a polynomial of degree at most equal to α, while all connected moments are at most linear functions of time. As a special case, the variance is an at most linear function of time.     

Fatty amides synthesized from vegetable oil as extractant of molybdenum(VI)

In this study, fatty amides (FAs) synthesized from palm olein were used to extract and separate Mo(VI) from acidic media. Effects of various parameters upon the separation of Mo(VI) from Co(II), Ni(II), Al(III) and Mn(II), including extractant concentration, metal ion concentration, contact time, diluent, and acidity, were investigated. It was found that Mo(VI) was successfully separated from the above commonly associated metal ions by stripping from the loaded organic phase. Different acidic and alkaline solutions were used. Ammonium hydroxide solution was an optimal. Extraction of Mo(VI) into the organic phase involved the formation of 1:3 complexes. This work presents the development of a low-cost and environmentally friendly extractant to recycle and recover molybdenum.     

Design,preparation and characterization of Cu/GA/Fe3O4@SiO2 nanoparticles as a catalyst for the synthesis of benzodiazepines and imidazoles

The synthesis and characterization of an efficient and reusable nanocatalyst, Cu/GA/Fe₃O₄@SiO₂, obtained by ultrasonic‐assisted grafting of guanidineacetic acid on modified Fe₃O₄@SiO₂ core–shell nanocomposite spheres and subsequent immobilization of Cu(II), are described. The catalyst was characterized by means of X‐ray diffraction, scanning and transmission electron microscopies, energy‐dispersive X‐ray spectroscopy, elemental analysis, thermogravimetric analysis, Fourier transform infrared spectroscopy, vibrating sample magnetometry and inductively coupled plasma optical emission spectrometry. The prepared nanocatalyst facilitated an efficient and straightforward friendly procedure for the synthesis of benzodiazepines and imidazoles in ethanol and under solvent‐free conditions, respectively. The nanocatalyst can be easily recovered using a magnet and reused several times without any significant loss of activity. Copyright © 2016 John Wiley & Sons, Ltd.