Phase Behavior of Bicontinuous and Water/Diesel Fuel Microemulsions Using Nonionic Surfactants Combined with Hydrophilic Alcohol Ethoxylates

Bicontinuous and water-in-diesel microemulsions were formulated using single nonionic alkyl poly glycol ethers combined with hydrophilic alcohol ethoxylates. The phase behavior at temperatures ranging from 0°C to 50°C was investigated. Visual inspection as well as cross-polarizers were used to detect anisotropy. The fish phase diagrams were determined. The presence of the hydrophilic alcohol ethoxylates was necessary to initiate both types of microemulsions. Increasing the hydrophobic chain length of the surfactant led to a wider range of temperature stability at lower surfactant concentration. Meanwhile, increasing the ethylene oxide units in the headgroup by two units led to a phase diagram that is dominated by lyotropic liquid crystal. The formulated water in diesel microemulsions were tested experimentally in a 4-cylinder diesel engine. From this it is observed that the emissions of NO_x, soot, and CO₂ were reduced substantially compared to neat diesel, while for the CO the reduction occurs just at low load.      

Synthesis,characterisation and ion exchange properties of hybrid organic–inorganic composite material: polyacrylamide zirconium (IV) iodosulphosalicylate

ABSTRACT

Contamination of groundwater by heavy metal is one of the most emerging and serious environmental problems. There are so many methods which are available to overcome these problems. Among various available methods, hybrid organic–inorganic ion exchange resin has become more popular due to certain advantages over other available conventional methods; hence, in the present proposed work, we synthesised a hybrid organic–inorganic composite material polyacrylamide zirconium (IV) iodosulphosalicylate by using the sol-gel technique. Synthesised resin was characterised by various methods like Infrared spectroscopy and Thermogravimetric analysis-Differential thermal analysis. Various samples of this ion exchange resin are prepared by changing the condition of synthesis, i.e. concentration of acrylamide to rationalise the ion exchange capacity of the synthesise hybrid organic–inorganic ion exchange resins. A mixture of 0.1 M potassium iodate, 0.1 M sulphosalicylic acid and 0.1 M acrylamide was added dropwise to 0.4 M zirconium oxychloride accompanied by constant stirring for 8 h using magnetic stirrer at 70°C to yield polyacrylamide zirconium (IV) iodosulphosalicylate with maximum ion exchange capacity. Ion exchange capacity of synthesised resin was determined by column method and the maximum ion exchange capacity was found for Pb(II). Determination of k_d values shows that the resin was highly selective for Pb (II).The selectivity for Pb was also evaluated by using certain binary mixture separation such as Ni (II)-Pb(II), Cu(II)-Pb(II), Cd(II)-Pb(II), Sr(II)-Pb(II), Ba(II)-Pb(II),Zn(II)-Pb(II) and Mg(II)-Pb(II).     

Application of artificial neural networks for formulation and modeling of dye adsorption onto multiwalled carbon nanotubes

In this study, an artificial neural network (ANN) has been developed to predict the adsorption amount of dye (methylene blue) onto multiwalled carbon nanotubes. Batch experiments have been carried out to obtain experimental data. Important parameters in the adsorption system such as initial dye concentration, adsorbent dosage, temperature, pH and contact time have been used as the inputs of the network, while the output is the final concentration of dye in aqueous solution after adsorption. The neural network structure has been optimized by testing various training algorithms and different number of neurons in a hidden layer. An empirical equation for determination of final dye concentration in aqueous solutions after adsorption has been developed by using the weights of the optimized network. The results of the optimized ANN have been compared with conventional models in equilibrium and kinetic fields. According to error analysis and determination coefficient, the ANN was found to be the most appropriate model to describe this adsorption process. Sensitivity analysis showed that initial dye concentration, pH and contact time are the most effective parameters in this process. The influence percentages of these parameters on the output were 28, 24 and 24 %, respectively.     

Mixed matrix vanadium oxide catalytic nanocomposite membrane for styrene oxidation

Mesoporous nanocomposite membranes with vanadium oxide–carbon nanotubes (V_xO_y-CNTs) embedded in γ-Al₂O₃ were successfully synthesized using the dip coating method. The membranes were evaluated for styrene oxidation to determine the optimum styrene conversion and benzaldehyde selectivity. Several factors that influence the preparation of defect-free coatings, such as the type of binder, the binder addition time and surface support treatments, were investigated. The physico-chemical permeation properties of the membranes were characterized using scanning electron microscope, transmission electron microscope (TEM), X-ray Diffraction XRD, Nitrogen adsorption (BET) and Thermogravimetric TGA. Response surface methodology (RSM) was used to investigate the effects of oxidant (H₂O₂) concentration, temperature, contact time and catalyst loading on styrene conversion and the selectivity of benzaldehyde. Based on the RSM analysis, the optimal oxidation conditions included a reaction temperature of 45 °C, a differential pressure of 1.5 bars, a molar ratio of H₂O₂: styrene of 1.5:1 and a catalyst loading of 30 %. These conditions resulted in the maximal styrene conversion of 25.6 and 84.9 % benzaldehyde selectivity.     

Effect of post-synthetic processing conditions on structural variations and applications of bacterial cellulose

Physicochemical properties of materials can be amended by altering their physical structure through different processing conditions. The present study was conducted to investigate the post-synthesis structural variations and physico-mechanical properties of bacterial cellulose (BC) sheets prepared using different drying methods. Wet BC sheets of the same origin were freeze dried (BC-FD), dried at room temperature (25 °C) (BC-DRT), and dried at elevated temperature (50 °C) (BC-DHT). FE-SEM micrographs revealed that BC-DRT and BC-DHT had a more tightly packed and compact structure than the loosely held fibrils of BC-FD. XRD analysis revealed the relative crystallinity of the BC sample to be 64.60, 59.16, and 47.20 % for BC-DHT, BC-DRT and BC-FD, respectively. The water holding capacity (WHC) of the BC-FD was higher than that of the other two samples. Four consecutive drying and rewetting cycles demonstrated that the WHC of all samples decreased with each cycle. The WHC of BC-DRT and BC-DHT was reduced to almost 0 after the first drying cycle, but the BC-FD samples were able to regain some of their WHC. The tensile strength and elongation modulus were in the order of BC-DHT > BC-DRT > BC-FD. Overall, the results of this study revealed that the post-synthetic processing conditions had a strong effect on the structure and physico-mechanical properties of BC.     

Switching adaptive controllers to control fractional‐order complex systems with unknown structure and input nonlinearities

This article investigates the chaos control problem for the fractional‐order chaotic systems containing unknown structure and input nonlinearities. Two types of nonlinearity in the control input are considered. In the first case, a general continuous nonlinearity input is supposed in the controller, and in the second case, the unknown dead‐zone input is included. In each case, a proper switching adaptive controller is introduced to stabilize the fractional‐order chaotic system in the presence of unknown parameters and uncertainties. The control methods are designed based on the boundedness property of the chaotic system's states, where, in the proposed methods the nonlinear/linear dynamic terms of the fractional‐order chaotic systems are assumed to be fully unknown. The analytical results of the mentioned techniques are proved by the stability analysis theorem of fractional‐order systems and the adaptive control method. In addition, as an application of the proposed methods, single input adaptive controllers are adopted for control of a class of three‐dimensional nonlinear fractional‐order chaotic systems. And finally, some numerical examples illustrate the correctness of the analytical results. © 2014 Wiley Periodicals, Inc. Complexity 21: 211–223, 2015     

Direct lactonization of α-amino γ,δ-unsaturated carboxylic acid esters via olefin activation: stereo- and regioselective production of homoserine lactone scaffolds having contiguous stereocenters

Triflic acid-mediated stereoselective direct lactonization of a variety of α-amino γ,δ-unsaturated carboxylic acid esters and the construction of new γ-butyrolactone structural motifs are reported. Several α-amino γ,δ-unsaturated carboxylic acid esters underwent stereo- and regioselective 1,5-cyclization and afforded a variety of highly substituted homoserine lactone scaffolds having contiguous stereocenters. The direct lactonization of the chiral α-amino γ,δ-unsaturated carboxylic acid esters with triflic acid led to the enantioselective synthesis of the novel homoserine lactones. A plausible mechanism for the direct lactonization of α-amino γ,δ-unsaturated carboxylic acid esters is presented. The stereochemistry of major isomers 3f, 7a, 7b, and 7d was unambiguously established from the X-ray structure analysis.     

Donor acceptor groups effect,polar protic solvents influence on electronic properties and reactivity of 2-Chloropyridine-4-carboxylic acid

The computational reckoning of 2-Chloropyridine-4-carboxylic acid (2CP4CA) was accomplished employing DFT/B3LYP with the root set as 6–311++G(d, p). The impact of polar protic solvents which are eco-friendly solvents (water, methanol, ethanol, 1-propanol) on 2CP4CA were analysed. To examine the solvent effect, vibrational investigations and NLO reports of 2CP4CA in dissimilar solvents were executed. Geometrical properties were also established in gas phase for 2CP4CA. Exercising VEDA program, the entire vibrational assignment was accomplished. Donor-acceptor exchanges were ascertained utilizing NBO scrutiny technique. Thermodynamic properties of 2CP4CA were analysed at different temperatures. By applying TD - DFT approach, theoretic UV–Vis absorption spectrum was procured in different solvents. In order to evaluate the complete electron concentration and sensitive spots of 2CP4CA, MEP coupled with FMO analyses were employed. HOMO along with LUMO orbitals and energy band gap were acquired for 2CP4CA employing dissimilar polar protic solvents. Additionally, ELF, LOL and charge transfer studies were also executed. RDG analysis has been exercised for revealing non-covalent interactions.     

A systematic investigation on flavonoids,catechin, β-sitosterol and lignin glycosides from Saraca asoca (ashoka) having anti-cancer & antioxidant properties with no side effect

Saraca asoca is an IUCN red-listed tree species that extensively famous in the Ayurvedic medicine field. Saraca asoca (Roxb.) de Wilde belongs to the family Fabaceae, has been used to treat various gynecological disorders, bacterial infections, worm infestations, haemmorhagic dysentery, uterine pain, skin diseases, cancer, circulatory, cardiovascular disorders, and many others. All parts of the Saraca asoca have medicinal values. Numerous antioxidant compounds like flavonoids, catechin, beta-sitosterol, lignin glycosides are present in the bark, leaf, and flower of Saraca asoca plant, which help to stabilize free radicals molecules that are associated with the development of cancer conditions. Currently in the cancer research study field new and more effective modes of natural therapies are recently being analyzed. Traditional medicines have been used for their preventative role against various diseases in the human population. Plant based therapy for cancer prevention is becoming more demanding due to its various unique properties such as natural chemical composition, less expensiveness, naturally available., easily orally administrable, significant chemo-protective activities, nontoxic to normal cells in the body, less side effects compared to other synthetic chemotherapeutic drugs. The chemotherapeutic drugs will be harmful to both cancer and normal cells. Additionally, some common side effects or health consequences like vomiting, nausea, bleeding, hair fall, alopecia, hyperuricemia, thrombocytopenia, bone marrow depression, mucositis are very common after chemotherapeutic drug treatment in cancer. This review paper summarizes the evidences which agree with the fact that flavonoids and other phenolic compounds in Saraca asoca plant possess significant antioxidant activity and an efficient chemopreventive characteristic against different types of cancer. This paper reviews the anticancer activities of Saraca asoca bark and flower and discusses the potential preventive roles of phenolic and flavonoids compounds, present in bark and flower of Saraca asoca in the cancer treatment process.