Semiquantitative determination of thiourea,thiocyanate, and sulfide by circular thin layer chromatography

Summary A method for semiquantitative determination of thiourea, thiocyanate, and sulfide is described. It involves making circular spots or rings on chromatoplates using the circular thin layer Chromatographic apparatus. The method is based on sensitivity and specificity of spot reactions and comparison of the color intensity of a circular spot with that of sensitivity standards. The accuracy of the method is ± 5% and the procedure is rapid, simple and economical.

---

Zusammenfassung Ein Verfahren zur halbquantitativen Bestimmung von Thioharnstoff, Thiocyanat und Sulfid wurde beschrieben. Es beruht auf der chromatographischen Herstellung kreisförmiger Flecken oder Ringe auf Dünnschichtplatten. Mit empfindlichen und spezifischen Tüpfelreaktionen wurden die Flecken gefärbt und die Farbintensität mit Standardproben verglichen. Die Genauigkeit beträgt ± 5%.

     

Crosslinking of ethylene-propylene (-diene) terpolymer elastomer initiated by an excimer laser

Excimer laser-induced crosslinking of ethylene-propylene-diene elastomer using a trace amount of photoinitiator, 1-hydroxy cyclohexyl phenyl ketone, was evaluated. Gel content measurements on irradiated samples showed that crosslinking was a natural consequence in all, which had undergone exposure to laser radiation. Degree of crosslinking was found to be linear with the laser exposure energy and was found to reach a saturation value of approximately 80% at about 100 J. However, for thicker samples the dependence of gel content i.e. crosslinking was found to be exponential over the range of laser exposure energy in excess of 200 J. As is expected, the tensile strength increased significantly with the increase of crosslinking. The band at 808 cm⁻¹ in the infrared spectra was attributed to the 5-ethylidene-2-norbornene (ENB) content in the polymer. The ENB has a double bond which is considered to be consumed with a high radiochemical yield and thereby contributes to the increase in rate of the formation of intermolecular bridge density.     

Stable gaseous aziridinium ions

Gaseous protonated aziridine ions are produced at the threshold from β-phenoxyethylamine molecular ions. The evidence for this is collisional activation spectra, using various precursors (including labelled analogues) under electron impact and field ionization conditions. Partial conversion to the acyclic \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm CH}_{\rm 3} {\rm CH = }\mathop {\rm N}\limits^ + {\rm H}_{\rm 2} $\end{document} isomer occurs at higher electron energies and is rationalized by means of a potential energy surface constructed from energetic data.     

New many fold 1,2,3‐selenadiazole aromatic derivatives

The many fold aromatic ketones 2a‐d are versatile compounds for the synthesis of the many fold 1,2,3‐selenadiazole aromatic derivatives 5a‐d . The preparation starts with the reaction between the many fold bromomethylene benzene derivatives 1a‐d and 4‐hydroxyacetophenone, which are transformed through the reaction with semicarbazide hydrochloride or ethylhydrazine carboxylate into the corresponding semicarbazones derivatives 3a‐d or hydrazones 4a‐d . The reaction with selenium dioxide leads to regiospecific ring closure of semicarbazones or hydrazones to give the many fold 1,2,3‐selenadiazole aromatic derivatives in high yield.     

Circular thin-layer chromatography of aromatic andα,β-unsaturated aldehydes

Summary A simple method based on circular thin-layer chromatography is described for the separation of aromatic and,-unsaturated aldehydes as their isonicotinoyl hydrazones. The development of the chromatoplate is complete within 2 minutes.

---

Zusammenfassung Aromatische und,-ungesättigte Aldehyde lassen sich durch ringförmige Dünnschichtchromatographie ihrer Isonikotinoylhydrazone trennen. Die Entwicklung der Dünnschichtplatten ist innerhalb 2 Minuten zu bewerkstelligen.

---

Résumé On décrit une méthode simple fondée sur la chromatographie circulaire en couche mince pour séparer les aldéhydes aromatiques et, non saturés, sous forme de leurs hydrazones isonicotinoyles. Le développement de la chromatoplaque est complet en deux minutes.

     

The structure of the diazonium coupling products of phenacyl thiocyanate and phenacyl selenocyanate with diazotized 3-phenyl-5-aminopyrazole

The reaction of diazotized 3-phenyl-5-aminopyrazole with phenacyl thiocyanate 1a and phenacyl selenocyanate 1b afforded directly 2-imino-3-(3-phenyl-5-pyrazolyl)-5-benzoyl-2,3-dihydro-1,3,4-thiadiazole monohydrate 9a and 2-imino-3-(3-phenyl-5-pyrazolyl)-5-benzoyl-2,3-dihydro-1,3,4-selenadiazole monohydrate 9b , respectively. The products 9a and 9b were also obtained from the reaction of C-benzoyl-N-(3-phenyl-5-pyrazolyl)formohydrazidoyl bromide 10 with potassium thiocyanate and potassium selenocyanate, respectively. Acetylation, benzoylation, and nitrosation of 9 afforded the corresponding diacetyl, dibenzoyl, and nitroso derivatives 11-13 , respectively. Cyclization of C-benzoyl-N-(3-phenyl-5-pyrazolyl)-nitrilimine 6 was shown to give the pyrazolo [5,1-d]triazole 8 and not the pyrazolo[5,1-c]-as-triazine derivative 7 , as previously reported.     

Optimization of a GFAAS method for determination of total inorganic arsenic in drinking water

The new 10 μg l⁻¹ arsenic standard in drinking water has been a spur to the search for reliable routine analytical methods with a limit of detection at the μg l⁻¹ level. These methods also need to be easy to handle due to the routine analyses that are required in drinking water monitoring. Graphite furnace atomic absorption spectrometry (GFAAS) meets these requirements, but the limit of detection is generally too high except for methods using a pre-concentration or separation step. The use of a high-intensity boosted discharge hollow-cathode lamp decreases the baseline noise level and therefore allows a lower limit of detection. The temperature program, chemical matrix modifier and thermal stabilizer additives were optimized for total inorganic arsenic determination with GFAAS, without preliminary treatment. The optimal furnace program was validated with a proprietary software. The limit of detection was 0.26 μg As l⁻¹ for a sample volume of 16 μl corresponding to 4.2 pg As. This attractive technique is rapid as 20 samples can be analysed per hour. This method was validated with arsenic reference solutions. Its applicability was verified with artificial and natural groundwaters. Recoveries from 91 to 105% with relative standard deviation <5% can be easily achieved. The effect of interfering anions and cations commonly found in groundwater was studied. Only phosphates and silicates (respectively at 4 and 20 mg l⁻¹) lead to significant interferences in the determination of total inorganic arsenic at 4 μg l⁻¹.     

Synthesis of Some Novel 2‐Anilinothiophene, 2,3′‐Bithienyl and Thienylthiopyridine Derivatives Resistance to Penicillium Digitatum Effect the Fruit

Reaction of benzotriazol‐1‐yl acetone 1 with phenyl isothiocyanate followed with α‐chloroacetone or ethyl‐α‐chloroacetate afforded 2‐anilinothiophenes 3 or 4 , respectively. Treatment of 3 with malononitrile at different reaction conditions afforded 6 or 7 . Reaction of 1 with CS₂ in DMF and phenacylbromide afforded S‐alkylated thiophene 10 . Reactions of the latter compound with different active methylene nitriles afforded thienylthiopyridine derivatives 14 and 15 . Condensation of 10 with hydrazine hydrate afforded hydrazon derivative 16 . Reaction of thiophene 17 with formamide in DMF afforded 19 which converted to N‐thienylpyrimidine 20 when treated with malononitrile. The structure of the newly synthesized compounds has been established on the basis of their analytical and spectral data. The compounds were also investigated for antibacterial and antifungal activities.     

Heavy-metal remediation by a fungus as a means of production of lead and cadmium carbonate crystals

We show here that reaction of the fungus, Fusarium oxysporum, with the aqueous heavy-metal ions Pb2+ and Cd2+ results in the one-step formation of the corresponding metal carbonates. The metal carbonates are formed by reaction of the heavy-metal ions with CO2 produced by the fungus during metabolism and thus provide a completely biological method for production of crystals of metal carbonates. The PbCO3 and CdCO3 crystals thus produced have interesting morphologies that are shown to arise because of interaction of the growing crystals with specific proteins secreted by the fungus during reaction. An additional advantage of this approach is that the reaction leads to detoxification of the aqueous solution and could have immense potential for bioremediation of heavy metals. Under conditions of this study, the metal ions are not toxic to the fungus, which readily grows after exposure to the metal ions.     

A sensitive and rapid liquid chromatography tandem mass spectrometry method for quantitative determination of 7-ethyl-10-hydroxycamptothecin (SN-38) in human plasma containing liposome-based SN-38 (LE-SN38)

7-Ethyl-10-hydroxycamptothecin (SN-38) is an active metabolite of Irinotecan (CPT-11), an anticancer pro-drug. To support clinical pharmacokinetic studies for liposome based formulation of SN-38 (LE-SN38) in cancer patients, a rapid, simple and sensitive liquid chromatography tandem mass spectrometry (LC-MS/MS) method has been developed and validated for the quantification of total SN-38 in human plasma. Sample preparation was carried out by one-step protein precipitation using cold acetonitrile with 0.5% acetic acid (v/v). Camptothecin was used as an internal standard (IS). Chromatographic separation of SN-38 and IS was achieved using a Synergi Hydro-RP column (C(18), 50 x 2 mm, 4 micro m), with a gradient elution of acetonitrile and 0.1% acetic acid. After ionization in electrospray source (positive ions), the acquisition was performed in the multiple reactions monitoring mode. Quantitation was accomplished using the precursor-->product ion combinations of m/z 393.1-->349.2 for SN-38 and 349.1-->305.1 for IS. The quantification limit of 0.05 ng/mL was achieved by using much lower volume (0.2 mL) of plasma and in the presence of LE-SN38. The method was validated over the concentration range of 0.05-400 ng/mL. Accuracy was within +/-12% of nominal at all concentration levels. Inter-day and intra-day precisions expressed as percentage coefficient of variation (%CVs) for quality control (QC) samples were less than 14 and 5%, respectively.