Determination of fluoroquinolone antibiotics by microchip capillary electrophoresis along with time-resolved sensitized luminescence of their terbium(III) complexes

We report on the time-resolved detection of the three fluoroquinolone (FQs) antibiotics ciprofloxacin (CIP), enrofloxacin (ENR) and flumequine (FLU). On addition of terbium(III) ions, the terbium(III)-FQs chelates are formed in-situ in an on-capillary derivatization reaction of a microfluidic system. The laser-induced terbium(III)-sensitized luminescence of the chelates is measured at excitation/emission wavelengths of 337/545 nm. The analytes can be separated and quantified within less than 4 min. A solid phase extraction step for analyte preconcentration can be included prior to chelation and microchip capillary electrophoresis. The analytical ranges of the calibration graphs for CIP, ENR and FLU are from 10.6 to 60.0, 10.3 to 51.0, and 11.5 to 58.8 ng mL⁻¹, respectively, and the detection limits are 3.2, 3.1 and 3.6 ng mL⁻¹, respectively. The precision was established at two concentration levels of each analyte and revealed relative standard deviations in the range from 3.0 to 10.2 %. The method was applied to the analysis of FQ-spiked water samples.

We report on the time-resolved detection of the three fluoroquinolone antibiotics. The analytes can be separated and quantified within less than 4 min. A solid phase extraction step for analyte preconcentration can be included prior to chelation and microchip capillary electrophoresis.

     

Computational design of thermostabilizing D-amino acid substitutions

Judicious incorporation of D-amino acids in engineered proteins confers many advantages such as preventing degradation by endogenous proteases and promoting novel structures and functions not accessible to homochiral polypeptides. Glycine to D-alanine substitutions at the carboxy termini can stabilize α-helices by reducing conformational entropy. Beyond alanine, we propose additional side chain effects on the degree of stabilization conferred by D-amino acid substitutions. A detailed, molecular understanding of backbone and side chain interactions is important for developing rational, broadly applicable strategies in using D-amino acids to increase protein thermostability. Insight from structural bioinformatics combined with computational protein design can successfully guide the selection of stabilizing D-amino acid mutations. Substituting a key glycine in the Trp-cage miniprotein with D-Gln dramatically stabilizes the fold without altering the protein backbone. Stabilities of individual substitutions can be understood in terms of the balance of intramolecular forces both at the α-helix C-terminus and throughout the protein.     

Triazinium Ligation: Bioorthogonal Reaction of N1-Alkyl 1,2,4-Triazinium Salts**

The development of reagents that can selectively react in complex biological media is an important challenge. Here we show that N1-alkylation of 1,2,4-triazines yields the corresponding triazinium salts, which are three orders of magnitude more reactive in reactions with strained alkynes than the parent 1,2,4-triazines. This powerful bioorthogonal ligation enables efficient modification of peptides and proteins. The positively charged N1-alkyl triazinium salts exhibit favorable cell permeability, which makes them superior for intracellular fluorescent labeling applications when compared to analogous 1,2,4,5-tetrazines. Due to their high reactivity, stability, synthetic accessibility and improved water solubility, the new ionic heterodienes represent a valuable addition to the repertoire of existing modern bioorthogonal reagents.     

New strategy for the construction of epoxy-bridged tetrahydropyran frameworks from trioxane precursors: application to a concise synthesis of a Riesling acetal

A simple one-pot method to prepare dioxabicyclo[2.2.1] heptane derivatives, from readily available 1,2,4-trioxane frameworks, under catalytic hydrogenation conditions over a platinum surface is reported. The overall transformation involves the hydrogenation of the double bond and a ring contraction rearrangement that presumably proceeds via a hydrogenolytic cleavage of the O-O bond and subsequent intramolecular ketalization. The strategy was successfully applied to the synthesis of a Riesling acetal.     

UVA self-photosensitized oxygenation of beta-ionone

The steady-state UVA (350 nm) photolysis of ( E )-β-ionone ( 1 ) in aerated toluene solutions was studied by ¹H NMR spectroscopy. The formation of the 1,2,4-trioxane ( 2 ) and 5,8-endoperoxide ( 5 ) derivatives in the ratio of 4:1 was observed. Time-resolved laser induced experiments at 355 nm, such as laser-flash photolysis, photoacoustic and singlet oxygen ¹O₂ phosphorescence detection, confirmed the formation of the excited triplet state of 1 with a quantum yield Φ _T = 0.50 as the precursor for the generation of singlet oxygen ¹O₂ ( Φ _Δ = 0.16) and the isomeric α-pyran derivative ( 3 ), which was a reaction intermediate detected by NMR. In turn, the reaction of ¹O₂ with 1 and 3 occurred with rate constants of 1.0 × 10⁶ and 2.5 × 10⁸  m ⁻¹s⁻¹ to yield the oxygenated products 5 and 2 , respectively, indicating the relevance of the fixed s-cis configuration in the α-pyran ring in the concerted [2+4] cycloaddition of ¹O₂.     

Shape memory epoxies based on networks with chemical and physical crosslinks

Epoxies are an important family of shape memory polymers (SMP) due to their excellent stability and thermo-mechanical endurance and the high values of shape fixity and shape recovery. Actuators based on these materials can be designed for large tensile elongations (e.g., 75% or higher) or large recovered stresses (e.g., 3 MPa or higher). However, meeting these requirements simultaneously is a difficult task because changes in the crosslink density affect both variables in opposite ways. We show that an SMP based on an epoxy network with both chemical and physical crosslinks could be strained up to 75% in four repeated shape memory cycles with tensile stresses close to 3 MPa. Shape fixity and shape recovery values were close to 98% and 96%, respectively, for everyone of the cycles, without any significant change between the first and subsequent cycles.     

Gold catalysis on immobilized substrates: a heteroannulation approach to the solid-supported synthesis of indoles

A gold-catalyzed cyclization of immobilized 2-alkynylanilines was developed as the key step in the synthetic sequence for the preparation of 2-substituted indoles. These results demonstrate the potential of the unexplored combination of gold catalysis and solid-phase organic synthesis.     

A Simple Approach to Design Proteins for the Sustainable Synthesis of Metal Nanoclusters

Metal nanoclusters (NCs) are considered ideal nanomaterials for biological applications owing to their strong photoluminescence (PL), excellent photostability, and good biocompatibility. This study presents a simple and versatile strategy to design proteins, via incorporation of a di‐histidine cluster coordination site, for the sustainable synthesis and stabilization of metal NCs with different metal composition. The resulting protein‐stabilized metal NCs (Prot‐NCs) of gold, silver, and copper are highly photoluminescent and photostable, have a long shelf life, and are stable under physiological conditions. The biocompatibility of the clusters was demonstrated in cell cultures in which Prot‐NCs showed efficient cell internalization without affecting cell viability or losing luminescence. Moreover, the approach is translatable to other proteins to obtain Prot‐NCs for various biomedical applications such as cell imaging or labeling.     

Quantifying the efficiency of förster‐assisted optical gain in semiconducting polymer blends by excitation wavelength selective amplified spontaneous emission

We study the correlation between Förster resonance energy transfer (FRET) and optical gain properties in conjugated polymer blends based on regioregular poly(3‐hexylthiophene) (P3HT) and poly(9,9‐dioctylfluorene‐alt‐benzothiadiazole) (F8BT). First, FRET dynamics are investigated with femtosecond transient absorption spectroscopy observing a sub‐picosecond energy transfer from F8BT to P3HT (550 fs) at medium doping levels (40% wt P3HT in F8BT). Amplified spontaneous emission (ASE) is then characterized in blends upon exciting predominantly the host and guest polymers, respectively. The corresponding density of absorbed photons at threshold conditions is compared upon host or guest photoexcitation as a method to quantitatively determine the FRET‐assisted ASE efficiencies. We observe a reduction in ASE efficiency upon host photoexcitation of 20%, in the best case, respect to guest photoexcitation. Our results confirm that even in strongly coupled host:guest mixtures delayed exciton population by energy transfer is subtle to losses ascribed to exciton–exciton annihilation. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2311–2317.