Purely quadratic dispersion of surface plasmon in Ag/Ni(111): the influence of electron confinement

Surface plasmon dispersion in nanoscale thin Ag films deposited onto the Ni(111) surface was investigated by angle‐resolved electron energy loss spectroscopy. We found that the dispersion curve contains only the quadratic term. The vanishing of the linear term was ascribed to the presence in the film of Ag 5sp‐related quantum well states. Screening effects enhanced by electron confinement in Ag quantum well states push the position of the centroid of the induced charge of the surface plasmon less inside the interface compared to other Ag systems, rendering null the linear coefficient of the dispersion curve. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Solid phase extraction of copper(II) by fixed bed procedure on cation exchange complexing resins

The efficiency of the metal ion recovery by solid phase extraction (SPE) in complexing resins columns is predicted by a simple model based on two parameters reflecting the sorption equilibria and kinetics of the metal ion on the considered resin. The parameter related to the adsorption equilibria was evaluated by the Gibbs–Donnan model, and that related to the kinetics by assuming that the ion exchange is the adsorption rate determining step. The predicted parameters make it possible to evaluate the breakthrough volume of the considered metal ion, Cu(II), from different kinds of complexing resins, and at different conditions, such as acidity and ionic composition.     

Damped oscillations in the energy autocorrelation functions of the 58Ni+46Ti elastic and 58Ni+62Ni elastic and inelastic scattering cross sections

Structures of non-statistical character, recently observed in ⁵⁸ Ni +⁴⁶ Ti elastic and ⁵⁸ Ni +⁶² Ni elastic and inelastic excitation functions, produce damped oscillations in the cross section energy autocorrelation functions. The analysis of these damped oscillations in terms of S-matrix spin and parity decoherence indicates, as a possible interpretation, damping of the coherent rotational motion of the intermediate dinuclear system formed in the reaction.     

Two-dimensional articulated systems developable on a single or double curvature surface

Summary The author illustrates the geometry and the kinematics of two articulated systems built up of a set of rigid, rectilinear elements, pin-jointed together. In the first case, we have a kinematic grid which, from its initial closed shape, expands along two directions on an open (or closed) cylindrical surface. In the second case, the kinematic grid expands on a double curvature surface like, for instance, a paraboloid. The characteristics of the two surfaces requires, for a single or double curvature, two different solutions. They have been patented by the National Research Council.

---

Sommario L'autore presenta la geometria e la cinematica di due sistemi articolati costituiti da un insieme di membri rigidi rettilinei accoppiati rotoidalmente. Nel primo caso si ha una griglia cinematica che, dalla configurazione chiusa iniziale, si può estendere in due direzioni su una superficie cilindrica chiusa (o aperta). Nel secondo caso, la griglia cinematica si estende su una superficie a doppia curvatura, ad esempio un paraboloide. Le caratteristiche delle due superfici richiedono, per i sistemi articolati, due soluzioni diverse. Queste soluzioni sono state brevettate dal C.N.R.

---

---

This work is part of the research activity supported by C.N.R. under contract n. PSN 83-098.     

Direct determination of total mercury in phosphate rock using alkaline fusion digestion

The aim of this work was to develop a new method to determine the mercury (Hg) concentrations in phosphate rock using a dedicated analytical instrument (the DMA80 Tricell by Milestone) that employs an integrated sequence of thermal decomposition followed by catalyst conversion, amalgamation and atomic absorption spectrophotometry. However, this instrument underestimates Hg concentrations when phosphorite and apatite rocks are investigated with a classic thermal decomposition treatment that complies with US EPA method 7473.     

Spectroscopic investigation of fluoroiodomethane, CH2FI: Fourier-transform microwave and millimeter-/submillimeter-wave spectroscopy and quantum-chemical calculations

Guided by theoretical predictions, the rotational spectrum of fluoroiodomethane, CH(2)FI, has been recorded and assigned. Accurate values are reported for the ground-state rotational constants, all quartic, sextic, and two octic centrifugal-distortion constants. The hyperfine structure of the rotational spectrum was thoroughly investigated using a Fourier-transform microwave spectrometer and the Lamb-dip technique in the millimeter-/submillimeter-wave region, thus allowing the accurate determination of the complete iodine quadrupole-coupling tensor and of the diagonal elements of the iodine spin-rotation tensor. Relativistic effects turned out to be essential for the accurate theoretical prediction of the dipole moment and quadrupole-coupling constants and were accounted for by direct perturbation theory and a spin-free four-component treatment based on the Dirac-Coulomb Hamiltonian. The relativistic corrections to the dipole moment amount to up to 34% and to the iodine quadrupole-coupling tensor to about 15-16% of the total values.     

Milli-free flow electrophoresis: I. Fast prototyping of mFFE devices

We coin a term of milli-free flow electrophoresis (mFFE) to describe mid-scale FFE with flow rates intermediate to macro-FFE and micro-FFE (μFFE). Introduced decades ago, mFFE did not find practical applications. We revive mFFE, as we view it as a viable purification complement to continuous synthesis in capillary reactors with product flow rates of ～5 to 2000 μL/min, too small for macro-FFE but too large for μFFE. The development of the tandem of continuous synthesis/purification will require the production and evaluation of a large number of prototypes of mFFE devices. As the first step, we developed a fast (<24 h) and economical (～$10) method for prototyping mFFE devices using a robotic milling machine. mFFE prototypes are constructed from two machined matching poly(methyl methacrylate) (PMMA) substrates, which are bonded in 10 min using dichloromethane to provide a strong and irreversible seal. Using the developed prototyping technology, we designed and evaluated 25 prototypes of mFFE devices. By optimizing the feed rates and rotational speeds of the drills, the depth of the electrode channels, the dimensions of the entrance and exit reservoirs, the sample flow rate, and the diameter and position of the sample input, we were able to achieve indefinitely long operation of the device with cycles of alternating 15-min electrophoresis and 0.5-min regeneration (bubble removal). The test analytes, rhodamine B and fluorescein, were baseline resolved by mFFE for flow rates ranging from 10 to 600 μL/min. These results prove that our prototyping approach is suitable for the challenging task of multi-parameter optimization of mFFE devices.     

Deciding the existence of uniform interpolants over transitive models

We consider the problem of the existence of uniform interpolants in the modal logic K4. We first prove that all ${\square}$ -free formulas have uniform interpolants in this logic. In the general case, we shall prove that given a modal formula ${\phi}$ and a sublanguage L of the language of the formula, we can decide whether ${\phi}$ has a uniform interpolant with respect to L in K4. The ${\square}$ -free case is proved using a reduction to the G?del L?b Logic GL, while in the general case we prove that the question of whether a modal formula has uniform interpolants over transitive frames can be reduced to a decidable expressivity problem on the???-calculus.