Synthesis,Characterization and Biological Investigations of Half-Sandwich Ruthenium(II) Complexes Containing Benzimidazole Moiety

Half-sandwich Ru(II) complexes belong to group of biologically active metallo-compounds with promising antimicrobial and anticancer activity. Herein, we report the synthesis and characterization of arene ruthenium complexes containing benzimidazole moiety, namely, [(η⁶-p-cymene)RuCl(bimCOO)] (1) and [(η⁶-p-cymene)RuCl₂(bim)] (2) (where bimCOO = benzimidazole-2-carboxylate and bim = 1-H-benzimidazole). The compounds were characterized by ¹H NMR, ¹³C NMR, IR, UV–vis and CV. Molecular structures of the complexes were determined by SC-XRD analysis, and the results indicated the presence of a pseudo-tetrahedral (piano stool) geometry. Interactions in the crystals of the Ru complexes using the Hirshfeld surface analysis were also examined. In addition, the biological studies of the complexes, such as antimicrobial assays (against planktonic and adherent microbes), cytotoxicity and lipophilicity, were performed. Antibacterial activity of the complexes was evaluated against S. aureus, E. coli, P. aeruginosa PAO1 and LES B58. Cytotoxic activity was tested against primary human fibroblasts and adenocarcinoma human alveolar basal epithelial cells. Obtained biological results show that the ruthenium compounds have bacteriostatic activity toward Pseudomonas aeruginosa PAO1 strain and are not toxic to normal cells. A molecular docking study was applied as a predictive source of information about the plausibility of examined structures binding with HSA as a transporting system.     

The Role of Singlet Oxygen in Photoreactivity and Phototoxicity of Curcumin

Curcumin is a plant-derived yellow-orange compound widely used as a spice, dye and food additive. It is also believed to have therapeutic effects against different disorders. On the other hand, there are data showing its phototoxicity against bacteria, fungi and various mammalian cells. Since the mechanism of its phototoxic action is not fully understood, we investigated here the phototoxic potential of curcumin in liposomal model membranes and in HaCaT cells. First, detection of singlet oxygen (¹O₂) luminescence proved that curcumin generates ¹O₂ upon blue light irradiation in organic solvent and in liposomes. Then, HPLC-EC(Hg) measurements revealed that liposomal and cellular cholesterol is oxidized by ¹O₂ photogenerated by curcumin. Enrichment of liposome membranes with curcumin significantly increased the oxygen photo-consumption rate compared to the control liposomes as determined by EPR oximetry. Cytotoxicity measurements, mitochondrial membrane potential analyses and protein hydroperoxides detection confirmed strong phototoxic effects of curcumin in irradiated HaCaT cells. These data show that since curcumin is advertised as a valuable dietary supplement, or a component of cosmetics for topical use, caution should be recommended especially when skin is exposed to light.     

Poly(vinylbenzyl Pyridinium Salts) as Novel Sorbents for Hazardous Metals Ions Removal

Novel efficient complexing resins—poly(vinylbenzyl pyridinium salts) fabricated through poly(vinylbenzyl halogene-co-divinylbenzene) quaternization of N-decyloxy-1-(pyridin-3-yl)ethaneimine and N-decyloxy-1-(pyridin-4-yl)ethaneimine—were tested as adsorbents of Pb(II), Cd(II), Cu(II), Zn(II), and Ni(II) from aqueous solutions. The structure of these materials was established by ¹³C CP-MAS NMR, X-ray photoelectron spectroscopy, elemental analysis, and Fourier transform infrared spectroscopy, as well as thermogravimetric and differential thermal analyses. The textural properties were determined using scanning electron microscopy and low-temperature N₂ sorption. Based on the conducted sorption studies, it was shown that the uptake behavior of the metal ions towards novel resins depended on the type of functionalities, contact time, pH, metal concentrations, and the resin dosage. The Langmuir model was investigated to be the best one for fitting isothermal adsorption equilibrium data, and the corresponding adsorption capacities were predicted to be 296.4, 201.8, 83.8, 38.1, and 39.3 mg/g for Pb(II), Zn(II), Cd(II), Cu(II), and Ni(II), respectively. These results confirmed that owing to the presence of the functional pyridinium groups, the resins demonstrated proficient metal ion removal capacities. Furthermore, VBBr-D4EI could be successfully used for the selective uptake of Pb(II) from wastewater. It was also shown that the novel resins can be regenerated without significant loss of their sorption capacity.     

Manganese(II), cobalt(II), nickel(II), copper(II) and zinc(II) complexes with 4-oxo-4H-1-benzopyran-3-carboxaldehyde

The complexes Mn(II), Co(II), Ni(II) and Zn(II) with 4-oxo-4H-1-benzopyran-3-carboxaldehyde were synthesized and characterized by elemental analysis, infrared and UV spectroscopy, X-ray diffraction patterns, magnetic susceptibility, thermal gravimetric analysis, conductivity and also solubility measurements in water, methanol and DMF solution at 298 K. They are polycrystalline compounds with various formula and different ratio of metal ion:ligand. Their formula are following: [MnL₂(H₂O)](NO₃)₂·2H₂O, [CoL₂](NO₃)₂·3H₂O, [NiL₂](NO₃)₂·3H₂O, [CuL₂](NO₃)₂·H₂O and [ZnL₃](NO₃)₂, where L = C₁₀H₆O₃. The coordination of metal ions is through oxygen atoms present in 4-position of γ-pyrone ring and of aldehyde group of ligand. Chelates of Mn(II), Co(II), Ni(II) and Cu(II) obey Curie–Weiss law and they are high-spin complexes with the weak ligand fields. The thermal stability of analyzed complexes was studied in air at 293–1,173 K. On the basis of the thermoanalytical curves, it appears that thermal stability of anhydrous analysed chelates changed following: Cu (423 K) < Zn (438 K) ~ Co (440 K) < Ni (468 K). The gaseous products of thermal decomposition of those compounds in air atmosphere are following: CO₂, CO, NO₂, N₂O, hydrocarbons and in case of hydrates also water. The molar conductance data confirm that the all studied complexes are 1:2 electrolytes in DMF solution.     

Synthesis and Strong Solvatochromism of Push-Pull Thienylthiazole Boron Complexes

The solvatochromic behavior of two donor-π bridge-acceptor (D-π-A) compounds based on the 2-(3-boryl-2-thienyl)thiazole π-linker and indandione acceptor moiety are investigated. DFT/TD-DFT calculations were performed in combination with steady-state absorption and emission measurements, along with electrochemical studies, to elucidate the effect of two different strongly electron-donating hydrazonyl units on the solvatochromic and fluorescence behavior of these compounds. The Lippert–Mataga equation was used to estimate the change in dipole moments (Δµ) between ground and excited states based on the measured spectroscopic properties in solvents of varying polarity with the data being supported by theoretical studies. The two asymmetrical D-π-A molecules feature strong solvatochromic shifts in fluorescence of up to ~4300 cm⁻¹ and a concomitant change of the emission color from yellow to red. These changes were accompanied by an increase in Stokes shift to reach values as large as ~5700–5800 cm⁻¹. Quantum yields of ca. 0.75 could be observed for the N,N-dimethylhydrazonyl derivative in nonpolar solvents, which gradually decreased along with increasing solvent polarity, as opposed to the consistently reduced values obtained for the N,N-diphenylhydrazonyl derivative of up to ca. 0.20 in nonpolar solvents. These two push–pull molecules are contrasted with a structurally similar acceptor-π bridge-acceptor (A-π-A) compound.     

Solid-state molecular organization and solution behavior of methane-1,1-diphosphonic acid derivatives of heterocyclic amines: the role of the topochemical ring modification and the intramolecular hydrogen bonds in monosubstituted piperid-1-ylmethane-1,1-diphosphonic acids

The crystal structures of 3-methylpiperid-1-ylmethane-1,1-diphosphonic (2), 4-methylpiperid-1-ylmethane-1,1-diphosphonic (3), 2-ethylpiperid-1-ylmethane-1,1-diphosphonic (4), and 2-methylpiperid-1-ylmethane-1,1-diphosphonic (5) acids have been determined and are discussed with respect to their molecular organization and crystal-packing preferences. The chair conformation, predominant also in solution, favors equatorial positioning of the bulky substituents of the heterocyclic N and C atoms. The molecular geometry also provides access to intramolecular hydrogen-bond formation between the axial protons located on the nitrogen atoms, as well as the carbon atoms closest to it, and phosphonic/phosphonate oxygen atoms. The molecules preferably arrange in monolayers, observed in all crystals with an exception of 3. The layers are held in place in the third direction through van der Waals interactions. The analysis of two-dimensional hydrogen-bonded networks is concentrated on revealing how the substituent's topology of the molecule affects the solid-state organization in well-defined structures and is aimed at unraveling the consequences and the possible conformational changes by stepwise network disruption upon crystal dissolution in water. The solution NMR studies are focused on revealing the role that the topochemistry of the substituent plays for the stereodynamics in 2-5. It is demonstrated that in contrast to piperid-1-ylmethane-1,1-diphosphonic acid (1), in which the ring inversion/rotation around the C-N bond concerted with the N-H...O hydrogen-bond breaking/formation process leads to a mixture of two interconverting conformers, the concerted N-H...O breaking/rotation/N-H...O formation process in 2 and 3 allows for a predominance of one conformer in solution. However, placement of a substituent at 2-position in the ring hampers the rotation around the C-N bond; this makes 4 and 5 significantly less flexible relative to compounds 1-3. In addition, both compounds 4 and 5 are proved to exist as a mixture of two conformers, the equilibrium of which in acidic solution is shifted towards the conformer found in solid state. In alkaline solutions of 4 and 5, the equilibrium is shifted towards the conformer that is forced by the flipping of the heterocyclic ring. These results correlate well with recently documented differences in the biological potency of this group of compounds.     

The alpha-helix folds more rapidly at the C-terminus than at the N-terminus

The helix-coil dynamics of different sections of an alpha-helical model peptide were observed separately by nanosecond temperature jump experiments with IR detection on a series of isotopically labeled peptides. The results show that the helix-coil dynamics of the alpha-helical C-terminus are faster than those of the N-terminus.     

Investigation of the electrokinetic properties of paraffin suspension. 2. In cationic and anionic surfactant solutions

Electrical phenomena at nonionogenic hydrophobic surfaces (solid or liquid) in water, electrolyte, and/or surfactant solutions still attract research. In part 1 of this paper we described the electrokinetic behavior of paraffin wax suspension in water and electrolyte solutions (NaCl or LaCl3). On the basis of the latest data of water structure near hydrophobic surfaces it was concluded that immobilized water dipoles at the interface can play an essential role in the zeta potential formation. In this paper were investigated the zeta potentials of paraffin wax in cationic surfactants cetyltrimethylammonium bromide, C16H33(CH3)3NBr, and octadecyltrimethylammonium chloride, C18H37(CH3)3NCl, and anionic surfactant sodium dodecyl sulfate, C12H25SO4Na. Also changes in wettability of the paraffin surface due to the surfactant's adsorption were studied via wetting contact angle measurements and calculation of the surface free energy. It was concluded that at a low surfactant concentration (10(-6) M) the water dipole structure still contributes to the zeta potential, but at a higher one the zeta potential is determined by the surfactant molecules' adsorption. A special role of OH- ions is also clearly seen. Moreover, a functional relationship was found between the surface free energy of the surfactant-covered paraffin surface and the zeta potential.     

Phenol adsorption on closed carbon nanotubes

We present the results of systematic studies of phenol adsorption on closed commercially available, unmodified carbon nanotubes. Phenol adsorption is determined by the value of tube-specific surface area, the presence of small amount of surface groups influence adsorption only in very small amount. Phenol can be applied as a probe molecule for comparative analysis of tube surface areas. Tube curvature influences adsorption from solution, i.e., we observe increasing adsorption energy (and slower desorption process) with the decrease in tube curvature. This is in full accordance with molecular simulation results.