Multi-dimensional scalar balance laws with discontinuous flux

We consider scalar balance laws with a dissipative source term. The flux function may be discontinuous with respect to both the space variable x and the unknown quantity u. We formulate the definition of entropy weak solutions and provide existence and uniqueness to the considered problem. The problem is formulated in the framework of multi-valued mappings. The notion of entropy measure-valued solutions is used to prove the so-called contraction principle and comparison principle.     

Uniqueness of minimal Fourier-type extensions in L_1-spaces

We give a characterization of uniqueness of finite rank Fourier-type minimal extensions in $L_1$ -norm. This generalizes the main result obtained by Lewicki (Proceedings of the Fifth International Conference on Function Spaces, Lecture Notes in Pure and Applied Mathematics, vol. 213, pp. 337–345, 1998) to the case of $n$ -circular sets in $\mathbb{C }^n$ .     

A Study of the Activity of Recombinant Mn-Superoxide Dismutase in the Presence of Gold and Silver Nanoparticles

Applied Biochemistry and Biotechnology - Superoxide dismutase (SOD) is one of the best characterized enzyme maintaining the redox state in the cell. A bacterial expression system was used to...     

Electrodegradation of Acid Mixture Dye through the Employment of Cu/Fe Macro-Corrosion Galvanic Cell in Na2SO4 Synthetic Wastewater

Traditional wastewater purification processes are based on a combination of physical, chemical, and biological methods; however, typical electrochemical techniques for removing pollutants require large amounts of electrical energy. In this study, we report on a process of wastewater purification, through continuous anodic dissolution of iron anode for aerated Cu/Fe galvanic cell in synthetic Na₂SO₄ wastewater solution. Electrochemical experiments were conducted by means of a laboratory size electrolyzer, where electrocoagulation along with electrooxidation phenomena were examined for wastewater containing Acid Mixture dye. The above was visualized through the employment of electrochemical (cyclic voltammetry and ac impedance spectroscopy techniques) along with instrumental spectroscopy analyses.     

Promoted ternary CuO-ZrO2-Al2O3 catalysts for methanol synthesis

Ternary CuO-ZrO₂-Al₂O₃ catalysts promoted by palladium or gold were prepared and tested in CO hydrogenation reaction at 260°C under elevated pressure (4.8 MPa). The promotion effect of palladium or gold addition on the physicochemical and catalytical properties of CuO-ZrO₂-Al₂O₃ catalysts in methanol synthesis (MS) was studied. The catalysts were characterized by BET, XRD, TPR-H₂, TPD-NH₃ methods. The BET results showed that the ternary system CuO-ZrO₂-Al₂O₃ had the largest specific surface area, cumulative pore volume and average pore size in comparison with the promoted catalysts. The yield of methanol can be given through the following sequence: 5%Pd/CuO-ZrO₂-Al₂O₃ > CuO-ZrO₂-Al₂O₃ > 2%Au/CuO-ZrO₂-Al₂O₃. We also found that the presence of gold or palladium on catalyst surface has strong influence on the reaction selectivity. The high selectivity of gold doped ternary catalyst is explained by the gold-oxide interface sites created on the catalyst surface and the acidity of those systems. The higher selectivity to methanol in the case of the palladium catalyst is explained by the spillover effect between Pd and CuO.      

Characterization of an all Sol-Gel Electrochromic Device WO3/Ormolyte/CeO2-TiO2

Electrochemical lithium intercalation in thin films of CeO₂-TiO₂ and WO₃, prepared by the sol-gel technique was investigated with cyclic voltammetry and spectroelectrochemical techniques in propylene carbonate solutions. A solid state system having the configuration WO₃/Ormolyte/CeO₂-TiO₂ has been assembled. The solid electrolyte, an organically modified electrolyte (ormolyte), was prepared with different [O]/[Li] ratios. The transmittance variation of this system during a potentiostatic step from –0.7 V to 0.8 V was about 35% at 550 nm.     

Kinetics and Mechanism of Chromium(III)-oxalates-2-hydroxynicotinate and Chromium(III)-oxalates-3-hydroxypicolinate Aquation in HClO4 Solutions

New chromium(III) complexes, [Cr(C₂O₄)₂(2-hnic)]²⁻ and [Cr(C₂O₄)₂(3-hpic)]²⁻ (where 2-hnic = O,O′-bonded 2-hydroxynicotinic acid and 3-hpic = N,O-bonded 3-hydroxypicolinic acid), were obtained and characterized in solution. The acid-catalyzed aquation of the both complexes leads to liberation of the appropriate pyridinecarboxylic acid and formation of cis-[Cr(C₂O₄)₂(H₂O)₂]⁻. Kinetics of these reactions were studied spectrophotometrically in the 0.1–1.0 M HClO₄ range, at I = 1.0 M. In the case of [Cr(C₂O₄)₂(2-hnic)]²⁻, a slow chelate-ring opening at the Cr–O (phenolate) bond is followed by a fast Cr–O (carboxylate) bond breaking. The rate law: k_obs = k_HQ_H[H⁺] was established, where k_H is the acid-catalyzed rate constant and Q_H is the protonation constant of the coordinated phenolate oxygen atom. In the case of [Cr(C₂O₄)₂(3-hpic)]²⁻, the reversible chelate-ring opening at Cr–N bond is followed by the rate determining step – the one-end bonded ligand liberation. The rate law for the first step was determined: k_obs = k₁+k₋₁/Q₁[H⁺], where k₁ and k₋₁ are the rate constants of the chelate-ring opening and closure and Q₁ is the protonation constant of the pyridine nitrogen atom. The aquation mechanisms are proposed and the effect of ligand coordination mode on complex reactivity is discussed.     

Monitoring of NO2 in the ambient air with passive samplers before and after a road reconstruction event

Nitrogen dioxide (NO₂) concentrations were used to evaluate the air quality before and after the infrastructural change of an important traffic artery in Mortsel, Antwerp (Belgium). During the reconstruction works two pairs of traffic lanes were reduced to one in each direction. Two sampling campaigns were conducted: the first one before the works in 2003 and the second one in 2005, after the road works were finished. Sampling was performed on a weekly base with the use of passive diffusion tubes on the streets, and also indoors in nearby houses. The samples were analyzed by ion chromatography, from which data the NO₂ concentrations in air could be calculated. These results were compared with NO₂ values from the air monitoring station 42R801 of the Flemish Environment Agency in Borgerhout, Antwerp. On the base of different NO₂ concentrations, correlated well with the traffic density, sampling locations were classified into three groups as follows: 1) ‘heavily polluted’ (heavy traffic); 2) ‘moderately polluted’ (medium traffic); or 3) ‘less polluted’ (low traffic density). Sampling sites located further from the road works, enclosed to the group ‘less polluted’, showed the lowest NO₂ concentrations. The highest NO₂ level was found for the locations close to reconstruction works, which belonged to the group ‘heavily polluted’. The contribution of NO₂ was at the same level before and after the road works. During the first campaign it ranged from 30 ± 7 µg/m³ to 71 ± 11 µg/m³ and during the second sampling it was between 36 ± 17 µg/m³ and 73 ± 17 µg/m³. These modernization works had no impact on preventing the traffic-related pollutant as NO₂ and as a consequence no significant effect on the air quality in the studied region. It has been proven that the impact of traffic on the air quality is unmistakably high and simply reduction of the number of the traffic lanes, intended to discourage the traffic flow, had apparently no environmentally advantageous effect.     

"Chemical ligation": a versatile method for nucleoside modification with boron clusters

A general approach to the synthesis of nucleoside conjugates containing carborane and metallocarborane complexes, based on Huisgen 1,3-dipolar cycloaddition ("chemical ligation"), is described. Boron-cluster-donors bearing terminal azide or ethynyl groups were prepared in the ring-opening reaction of dioxane-boron-cluster adducts and an azide anion or suitable alkynol-derived alcoholate nucleophile. Analogous derivatives bearing terminal sulfhydryl groups were also prepared. Nucleosides with various spacers containing terminal azide or ethynyl groups, located within nucleobases or sugar residues, were used as boron-cluster acceptors. The proposed methodology provides a convenient way to synthesize libraries of boron-cluster-modified nucleosides for various applications.     

1H, 13C and 15N NMR studies on adducts formation of rhodium(II) tetraacylates with some azoles in CDCl3 solution

Adduct formations of rhodium(II) tetraacetate and tetratrifluoroacetate with some 1H-imidazoles, oxazoles, thiazoles, 1H-pyrazoles and isoxazole have been investigated by the use of 1H, 13C, 15N NMR and electronic absorption spectroscopy (VIS) in the visible range. Azoles tend to form axial adducts containing rhodium(II) tetraacylates bonded via nitrogen atom. Bulky substituents close to the nitrogen atom prevent the Rh--N bond formation, and in several cases switch over the binding site to the oxygen or sulphur atoms. The (15)N adduct formation shift Deltadelta(15N) (Deltadelta = delta(adduct) - delta(ligand)) varied from ca - 40 to - 70 ppm for the nitrogen atom involved in complexation, and of a few parts per million only, from ca - 6 to 3 ppm, for the non-bonded nitrogen atom within the same molecule. The Deltadelta(1H) values do not exceed one ppm; Deltadelta(13C) ranges from - 1 to 6 ppm. Various complexation modes have been proved by electronic absorption spectroscopy in the visible region (VIS). For comparison purposes, some adducts of pyridine, thiophene and furan derivatives have been measured as well. The experimental findings were compared with calculated chemical shifts, obtained by means of DFT B3LYP method, using 6-311 + G(2d,p), 6-31(d)/LanL2DZ and 6-311G(d,p) basis set.