Structural Properties Governing Retention Mechanisms on Immobilized Artificial Membrane (IAM) HPLC Columns

The aims of this study were to investigate whether three commercially available immobilized artificial membrane (IAM) HPLC columns yield collinear data for neutral compounds, and whether IAM scales are distinct from the log P_oct (partition coefficient in the octanol/H₂O system) scale. With these objectives, the retention mechanisms on the IAM HPLC columns were analysed by linear solvation free‐energy relationships (LSERs). A set of 68 neutral model compounds with known solvatochromic parameters and log P_oct values was investigated, allowing a regular and broad exploration of property space. The resulting solvatochromic equations clearly indicate that the three IAM stationary phases retain small neutral solutes by a balance of intermolecular forces closely resembling those underlying partitioning in octanol/H₂O and retention on a reversed‐phase LC‐ABZ HPLC column. For all systems, the solute's size and hydrogen‐bond‐acceptor basicity are the two predominant factors, whereas dipolarity/polarisability and hydrogen‐bond‐donor acidity play only minor roles.     

Kinetics of the reaction of OH radicals with a series of esters under simulated conditions at 295 K

The rate constants of the isopropyl acetate, n-propyl acetate, isopropenyl acetate, n-propenyl acetate, n-butyl acetate, and ethyl butyrate reactions with OH radicals were determined in purified air under atmospheric conditions, at 750 torr and (295 ± 2) K. A relative rate experimental method was used; n-heptane, n-octane, and n-nonane were the reference compounds, with, respectively, rate constants for the reaction with OH of 7.12 × 10⁻¹², 8.42 × 10⁻¹², and 9.70 × 10⁻¹² molecule⁻¹ cm³s⁻¹. The following rate constants were obtained in units of 10⁻¹² molecule⁻¹ cm³s⁻¹; isopropyl acetate, (3.12 ± 0.29); n-propyl acetate, (1.97 ± 0.24); isopropenyl acetate, (62.53 ± 1.24); n-propenyl acetate, (24.57 ± 0.24); n-butyl acetate, (3.29 ± 0.35); and ethyl butyrate, (4.37 ± 0.42). Tertiary butyl acetate has a low reactivity with OH radicals (<1 × 10⁻¹² molecule⁻¹ cm³s⁻¹). © 1996 John Wiley & Sons, Inc.     

Pump−probe experiments at the TEMPO beamline using the low‐α operation mode of Synchrotron SOLEIL

The SOLEIL synchrotron radiation source is regularly operated in special filling modes dedicated to pump–probe experiments. Among others, the low‐α mode operation is characterized by shorter pulse duration and represents the natural bridge between 50 ps synchrotron pulses and femtosecond experiments. Here, the capabilities in low‐α mode of the experimental set‐ups developed at the TEMPO beamline to perform pump–probe experiments with soft X‐rays based on photoelectron or photon detection are presented. A 282 kHz repetition‐rate femtosecond laser is synchronized with the synchrotron radiation time structure to induce fast electronic and/or magnetic excitations. Detection is performed using a two‐dimensional space resolution plus time resolution detector based on microchannel plates equipped with a delay line. Results of time‐resolved photoelectron spectroscopy, circular dichroism and magnetic scattering experiments are reported, and their respective advantages and limitations in the framework of high‐time‐resolution pump–probe experiments compared and discussed.     

A bound for orders in differential Nullstellensatz

We give the first known bound for orders of differentiations in differential Nullstellensatz for both partial and ordinary algebraic differential equations. This problem was previously addressed in [A. Seidenberg, An elimination theory for differential algebra, Univ. of California Publ. in Math. III (2) (1956) 31–66] but no complete solution was given. Our result is a complement to the corresponding result in algebraic geometry, which gives a bound on degrees of polynomial coefficients in effective Nullstellensatz [G. Hermann, Die Frage der endlich vielen Schritte in der Theorie der Polynomideale, Math. Ann. 95 (1) (1926) 736–788; E.W. Mayr, A.W. Meyer, The complexity of the word problems for commutative semigroups and polynomial ideals, Adv. Math. 46 (3) (1982) 305–329; W.D. Brownawell, Bounds for the degrees in the Nullstellensatz, Ann. of Math. 126 (3) (1987) 577–591; J. Kollár, Sharp effective Nullstellensatz, J. Amer. Math. Soc. 1 (4) (1988) 963–975; L. Caniglia, A. Galligo, J. Heintz, Some new effectivity bounds in computational geometry, in: Applied Algebra, Algebraic Algorithms and Error-Correcting Codes, Rome, 1988, in: Lecture Notes in Comput. Sci., vol. 357, Springer, Berlin, 1989, pp. 131–151; N. Fitchas, A. Galligo, Nullstellensatz effectif et conjecture de Serre (théorème de Quillen–Suslin) pour le calcul formel, Math. Nachr. 149 (1990) 231–253; T. Krick, L.M. Pardo, M. Sombra, Sharp estimates for the arithmetic Nullstellensatz, Duke Math. J. 109 (3) (2001) 521–598; Z. Jelonek, On the effective Nullstellensatz, Invent. Math. 162 (1) (2005) 1–17; T. Dubé, A combinatorial proof of the effective Nullstellensatz, J. Symbolic Comput. 15 (3) (1993) 277–296].This paper is dedicated to the memory of Eugeny Pankratiev, who was the advisor of the first three authors at Moscow State University.     

Detection enhancement in nano-channels using micro-machined silicon groove

The present paper reports on an experimental study of the possibility to use a micro-machined detection groove to enhance the detection sensitivity in flat-rectangular nano-channels for ultra-rapid liquid chromatography separations. Transversally running detection grooves with three different axial widths (respectively, 2, 4 and 6mum) and one depth (4.75mum) were tested in glass and silicon channels for the whole range of detectable fluorescein isothiocyanate isomer I, FITC, concentrations. The groove with the most square-like cross-section (i.e., 4mum wide and 4.75mum deep) yielded the best combination of detection gain and minimal additional band broadening. In a 1cm long channel, the effective plate loss caused by the 4mum wide groove would only be of the order of 20%, while the gain in S/N-ratio was of the order of a factor of 5. The detection groove concept yields larger gains in silicon channel substrates than in glass channel substrates, due to the larger stray light losses occurring in the latter.     

Validation of a tentative microsatellite marker for the dopamine D4 receptor gene by capillary gel electrophoresis

Two to four-basepair-short tandem repeats (i.e. microsatellites) are broadly utilized as genetic markers for mapping disease loci in whole genome search analyses. Based on their close vicinity on chromosome 11, the D11S1984 microsatellite was anticipated as a tentative marker for the dopamine D4 receptor gene. A capillary gel electrophoresis based genotype analysis method and an in-house made computational tool was developed for the analysis of the D11S1984 microsatellite marker to examine a healthy Hungarian population of n=106. The data obtained did not suggest significant linkage between the D11S1984 marker and the DRD4 gene.     

Development of a capillary electrophoretic method for the analysis of low-molecular-weight amines from metal working fluid aerosols and ambient air

A method for the determination of low-molecular-weight amines from indoor and ambient air was developed using a concentration device followed by CE coupled with indirect spectrophotometric and mass spectrometric detection that enables a reliable, rapid-response and easy-to-operate method. In indirect detection method, the selected amines were separated from interfering metal ions and amino alcohols present in the samples with an imidazole-based buffer with ethanol and EDTA as modifier. By replacing imidazole with ammonium, the final buffer was applicable for MS detection for the analytes with m/z higher than 50. A novel monolithic polymer material based on poly(methacrylate-acrylate) copolymer was developed for sampling short-chain amines from the gaseous phase. The selected analysis conditions were applied to quantify the selected short-chain amines with detection limits for the whole procedure determined between 1 and 2 microg/filter when 40 L air was sampled with 1 L/min velocity. Improved linearity and precision were obtained when the raw, time-scaled electropherogram data were transformed into mobility-scale applied for the determination of the performance characteristics of the methods. The applicability of the process of data transformation into the mobility scale was demonstrated by studying the matrix effect of water-miscible metal working fluid (stable water-oil emulsion) and of ambient air as real samples. CE-indirect UV and CE-MS, combined with the possibility of rapid air sampling, can be useful for the estimation of short-term exposure of the selected biogenic amines.     

Substituent effects on the basicity of 3,7-diazabicyclo[3.3.1]nonanes

Basicity constants for a series of 3,7-diazabicyclo[3.3.1]nonane derivatives in acetonitrile with a variation over 13 orders of magnitude have been determined using a spectrophotometric titration technique. An excellent correlation between basicity and calculated proton affinities obtained at PCM-B3LYP/6-31+G(d)//B3LYP/6-31G(d) level was found. The results are discussed in terms of substituent effects and compared to (15)N NMR chemical shifts.     

Cardiac-synchronized gadolinium-enhanced MR angiography: preliminary experience for the evaluation of the thoracic aorta

Gadolinium (Gd)-enhanced three-dimensional breath-hold magnetic resonance cardiac-synchronized angiography was performed in 13 patients suspected or known to have thoracic aortic disease. High-quality angiograms of the ascending/descending thoracic aorta and coronary arteries were obtained with this method. MR angiograms were compared with Gd-enhanced angiograms obtained without cardiac synchronization. Synchronized imaging showed significantly better aortic valve leaflet and proximal coronary artery depiction. Synchronization reduced motion artifacts, allowing better visualization of the aortic root and proximal coronary arteries.     

Electron Beam‐Based Functionalization of Poly(ethersulfone) Membranes

Poly(ethersulfone) membranes were surface modified in a one‐step procedure. For this purpose, the membranes were soaked with aqueous solutions of different low‐molecular weight molecules bearing diverse hydrophilic functionalities and subject to electron beam treatment. No catalysts, photoinitiators, organic solvents or other toxic reagents were used, and no additional synthetic or purification steps were required.