Synthesis and characterization of cobalt(II), nickel(II), copper(II), palladium(II) and dioxouranium(VI) complexes of the antipyrine Schiff base of 3-formylsalicylic acid

A new Schiff base has been synthesized from 4-aminoantipyrine and 3-formylsalicylic acid. The ligand has a dianionic tetradentate compartmental OONO donor system. The cobalt(II), nickel(II), copper(II) and dioxouranium(VI) complexes exist in phenolato-bridged dinuclear species, while palladium(II) gives a mononuclear complex with free –COOH groups. The complexes have been characterized by elemental analyses, i.r., u.v.-vis, thermal and magnetic measurements.     

Carboxylic Acids from <Emphasis Type="Italic">Phyllanthus urinaria</Emphasis>

Five compounds, terephthalic acid mono-[2-(4-carboxy-phenoxycarbonyl)-vinyl] ester (1), (E)-3-(5′-hydroperoxy-2,2′-dihydroxy[1,1′-biphenyl]-4-yl)-2-propenoic acid (2), 3,4,5-trihydroxybenzoic acid (3), succinic acid (or butanedioic acid) (4), and 2,3,4,5,6-pentahydroxybenzoic acid (5), were isolated from Phyllanthus urinaria. The structures of these compounds were elucidated by means of spectral techniques including IR, MS, and 1D/2D NMR. 1 and 2 are new compounds.__________Published in Khimiya Prirodnykh Soedinenii, No. 1, pp. 14–17, January–February, 2005.     

Sol–gel preparation and properties of hydroxypropylcellulose–titania hybrid thin films

Hydroxypropylcellulose (HPC)–titania hybrid thin films were prepared by sol–gel method where titanium tetraisopropoxide Ti(OC₃H₇ ⁱ )₄ was hydrolyzed under acidic conditions in the presence of HPC, followed by dip-coating and drying at 120 °C for 24 h. The viscosity average molecular weight of HPC was 55,000–70,000 or 110,000–150,000, and the TiO₂/(HPC + TiO₂) mass ratio ranged from 0 to 1, which was calculated on the assumption that all Ti(OC₃H₇ ⁱ )₄ is converted into TiO₂. The films were 0.35–1.0 μm thick, transparent in visible region and opaque in ultraviolet (UV) region, where the optical absorption coefficient in UV region increased with increasing titania content. The refractive index increased with increasing titania content, ranging from 1.6 to 1.8 for the hybrid thin films. The pencil hardness increased from 6B to 5H, the durability in hot water significantly increased and the contact angle of water on films increased from 35° to 89° with increasing titania content. Crack-free films could be deposited on organic polymer substrates irrespective of titania or HPC contents, where cracking did not occur at higher HPC contents even when the substrate was bent.     

Quantum-chemical gas-phase calculations on the protonation forms oftrans- andcis-urocanic acid

The neutral, cationic, and anionic structures of both prototropic tautomers oftrans- andcis-urocanic acid [(E)- and (Z)-3-(1H-imidazol-4(5)-yl)propenoic acid, respectively] were studied by using semiempirical andab initio gas-phase calculations. Potential energy surfaces of the structures were calculated by using the semiempirical AM1 method, and the geometries corresponding to global minima on these surfaces were optimized up to the MP2/6-31G^* level of theory. The calculated protonation forms of each urocanic acid isomer have a planar molecular structure due to a delocalized -electron system, and all of them prefer thes-trans conformation with respect to the bond between the imidazole and the propenoic acid moieties. Thecis-urocanic acid structures are stabilized by an intramolecular hydrogen bond. The chargedcis-urocanic acid isomers have a lower molecular energy than the correspondingtrans-isomers, whereas the neutral molecules have, after inclusion of thermodynamic corrections, approximately the same energy. The cationic urocanic acid structures have about 2500 kJ mol^–1 lower energy than the anionic ones and about 1000 kJ mol^–1 lower energy than the neutral ones. The nonzwitterionic forms of the neutral urocanic acid isomers have about 200 kJ mol^–1 lower energy than the zwitterionic ones. These energy differences are explained by the proton affinities of the imidazole and the propenoic acid moieties of the urocanic acid structures.     

Dissociation constants of phenols in methanol--water mixtures

A preferential solvation model that relates solute properties with solvent composition in binary mixtures has been applied to the dissociation pKa values of a set of 28 substituted phenols in methanol-water mixtures. The parameters of the model allow estimation of the pKa value of each phenol for any methanol-water composition. Moreover, it is demonstrated that the pKa values of the whole set of phenols at any methanol-water composition are linearly related to the pKa values of the phenols in water. Equations that relate the correlations' slope and intercept values with the solvent composition have been derived and tested with the set of phenols. The general parameters obtained for these equations allow an accurate calculation of the pKa value of any phenol, even of those not included in the original set, at any methanol-water composition solely from the pKa value of the phenol in water. These calculated pKa values can be used for quantitative structure-HPLC retention relationships. The method is tested by comparison of the calculated pKa values with the HPLC determined pKa values of 26 phenols in a polymeric column with a 50% methanol as mobile phase.     

Mass spectrometric studies on azidomorphine derivatives

The mass spectrometric behaviour of nine azidomorphine derivatives have been studied. These compounds proved to have surprisingly specific and selective fragmentation under electron-impact. For 6-deoxy-6-azido-dihydro-isomorphine derivatives (I to V) the main decomposition pathway involves the loss of an N₂ molecule followed by a very rapid and selective fragmentation process. On the other hand, the molecular ions of 6-deoxy-8-azido-pseudomorphine derivatives (VI to VIII) and 6-deoxy-6-azido-14-hydroxy-isocodein (IX) primarily decompose by loss of the N₃ radical. This is due to the allylic effect of the double bond in ring C, corresponding to the chemical behaviour of these compounds.     

Influence of the cathodic polarization on the stability of Ti surface in concentrated KOH solutions

The stability of spontaneous thin layers and thin layers formed upon cathodical polarization of Ti in KOH solutions have been studied by potentiostatic and ellipsometric methods. At open circuit potential (OCP) the strongly adherent films, whose thickness depends on the concentration of the KOH solution, were formed. During the cathodic polarization the transformation of these films to weakly adsorbed precipitated layers on the electrode surface was observed. Comparing the theoretically computed curves with the experimental Ψ vs Δ loci measured ellipsometrically, the complex indices of refraction and the thickness of the generated films, from 3.6 to 60 nm in 1 M KOH and from 36 to 105 nm in 5 M KOH (adherent to the electrode surface), were determined. At OCP the rate of film growth increases with increasing the concentration of KOH solution. Cathodic polarizations change the chemical composition and retard the rate of film growth. Based on the ellipsometric and electrochemical data the chemical compositions of the formed films consisted of TiO₂, Ti₂O₃, TiO₂·H₂O, Ti(OH)₃ and TiOOH·nH₂O.     

Fuzzy Symmetries for Linear Molecules and their Molecular Orbitals

In this paper, the fuzzy symmetry of some prototypical linear molecules has been analyzed. The results show that some molecular orbitals (MOs) are less symmetrical but some others are more symmetrical than the molecular skeleton, which the MOs correspond to. The membership functions of space inversion for MOs are closely related to the chemical characteristics of the MOs. Sometimes, although the symmetry of a molecular skeleton is not obvious, however that of some MO is quite obvious. The membership functions of the fuzzy inversion symmetry depend on the choice of the position of the center of inversion. As compared to those of diatomic molecules and linear tri-atomic molecules, the linear polyatomic molecules in which a distinctive fuzzy symmetry of space translation may exist, and thus a significant effect on their properties can be expected.     

Synthesis and characterization of microencapsulated dicyclopentadiene with melamine–formaldehyde resins

Microcapsules containing healing agents have been used to develop the self-healing polymeric composites. These microcapsules must possess special properties such as appropriate strength and stability in surrounding medium. A new series of microcapsules containing dicyclopentadiene (DCPD) with melamine–formaldehyde (MF) resin as shell material were synthesized by in situ polymerization technology. These microcapsules may satisfy the requirements for self-healing polymeric composites. The chemical structure of microcapsule was identified by using Fourier transform infrared (FTIR) spectrometer. The morphology of microcapsule was observed by using optical microscope (OM) and scanning electron microscope. Size distribution and mean diameter of microcapsules were determined with OM. The thermal properties of microcapsules were investigated by using thermogravimetric analysis and differential scanning calorimetry. Additionally, the self-healing efficiency was evaluated. The results indicate that the poly(melamine–formaldehyde) (PMF) microcapsules containing DCPD have been synthesized successfully, and their mean diameters fall in the range of 65.2∼202.0 μm when the adjusting agitation rate varies from 150 to 500 rpm. Increasing the surfactant concentration can decrease the diameters of microcapsules. The prepared microcapsules are thermally stable up to 69 °C. The PMF microcapsules containing DCPD can be applied to polymeric composites to fabricate the self-healing composites.     

Synthesis,crystal structure,electrochemical properties and large optical limiting effect of a novel 3-(E)-ferrocenyl-vinyl-<Emphasis Type="BoldItalic">N</Emphasis>-hexyl carbazole

The novel compound, 3-(E)-ferrocenyl-vinyl-N-hexylcarbazole (FVHC) was first synthesized and fully characterized by elemental analysis, IR, ¹H-NMR, single-crystal X-ray diffraction, ultraviolet (UV) absorption, cyclic voltammograms (CV) and optical limiting (OL) measurements. The result of single crystal X-ray diffraction for the compound reveals that the ferrocenyl and carbazole groups are approximately coplanar, and bridged by double-bond with E configuration, showing that there is a well-delocalized π-electron system in the molecule. The electrochemical investigation indicated that the electron in the FVHC may partially be delocalized over the π-conjugated system and CT process in functionalized carbazole systems. Besides, the compound exhibited strong UV absorption and large optical limiting effect, indicating promising potential applications as useful OL materials.