Colorimetric and fluorimetric pH sensing using polydiacetylene embedded within PVC-PCL nanofibers

The applicability of model polydiacetylenes (PDAs) in hydrogen ions sensitive optodes was tested. Nanofibers mats were electrospun using a mixture of polyvinyl chloride (PVC) and polycaprolactone (PCL) together with 10, 12-tricosadiynoic acid (TCDA) or 10,12-pentacosadiynoic acid (PCDA). After the polymerization the mats were applied in colorimetric and fluorimetric pH sensors. The PDAs were formed by photopolymerization with a UV lamp (254 nm), resulting in a change of mats color from white to dark blue. The morphology of both fiber mats is similar (SEM images), and the average diameters of fibers were estimated as equal to 228±73 and 248±61 nm for TCDA and PCDA, respectively. As the pH increases, the color of the fiber mat changes from blue to red and the process can be followed visually. The result obtained by computer image analysis showed a sigmoidal increase in the intensity of red and a decrease in the intensity of blue color with increasing pH. A similar sigmoidal response is observed for the dependence of the emission intensity on the pH. Changes in the recorded signal occur in the pH range from 7 to 8.5 or from 8 to 9.5 for mats with TCDA and PCDA, respectively. Both readout modes can be successfully used for pH sensing with proposed nanofibrous mats in the range of pH close to the physiological pH range.     

LC and Principal Component Analysis in the Lipophilicity Study of Seven Angiotensin II-AT1 Receptor Antagonists (Sartans)

Seven sartans have been chromatographed with acetonitrile-buffer and methanol–buffer in different proportions as mobile phases. The retention values, log k or R _M were extrapolated to zero organic modifier content to obtain the log k _w or R _MW values. Calibration equations were obtained for standards of known lipophilicity. A simple method employing a gradient procedure of 10–100% acetonitrile or methanol in 60 min and standards of the extreme lipophilicity was also elaborated. Chromatographic log P values were compared to those calculated by use of different software products. Finally, principal component analysis was performed to explore and visualize similarities and differences among the drugs and among the methods.     

Improvement of the Water Resistance of a Narrow‐Band Red‐Emitting SrLiAl3N4:Eu2+ Phosphor Synthesized under High Isostatic Pressure through Coating with an Organosilica Layer

A SrLiAl₃N₄:Eu²⁺ (SLA) red phosphor prepared through a high‐pressure solid‐state reaction was coated with an organosilica layer with a thickness of 400–600 nm to improve its water resistance. The observed 4f⁶5d→4f⁷ transition bands are thought to result from the existence of Eu²⁺ at two different Sr²⁺ sites. Luminescence spectra at 10 K revealed two zero‐phonon lines at 15377 (for Eu(Sr1)) and 15780 cm^?1 (for Eu(Sr2)). The phosphor exhibited stable red emission under high pressure up to 312 kbar. The configurational coordinate diagram gave a theoretical explanation for the Eu^2+/3+ result. The coated samples showed excellent moisture resistance while retaining an external quantum efficiency (EQE) of 70 % of their initial EQE after aging for 5 days under harsh conditions. White‐light‐emitting diodes of the SLA red phosphor and a commercial Y₃Al₅O₁₂:Ce³⁺ yellow phosphor on a blue InGaN chip showed high color rendition (CRI=89, R9=69) and a low correlated color temperature of 2406 K.     

Incorporation of a Phenanthrene Subunit into a Sapphyrin Framework: Synthesis of Expanded Aceneporphyrinoids

32‐Hetero‐5,6‐dimethoxyphenanthrisapphyrins—macrocycles that link structural features of polycylic aromatic hydrocarbons and expanded porphyrins—were obtained in a straightforward [3+1] condensation reaction of dimethoxyphenanthritripyrrane and 2,5‐bis(arylhydroxymethyl)heterocyclopentadienes. The highly folded conformation of formally 4 n π‐electron macrocycles causes them to manifest only limited macrocyclic π conjugation as explored by means of NMR spectroscopic and X‐ray structural analyses, and supported by DFT calculations. Although protonation does not change their π‐conjugation characteristics, the cleavage of ether groups at the phenanthrenylene moiety yields nonaromatic 32‐hetero‐5,6‐dioxophenanthrisapphyrins.     

The Structural Determinants for α1-Adrenergic/Serotonin Receptors Activity among Phenylpiperazine-Hydantoin Derivatives

Several studies confirmed the reciprocal interactions between adrenergic and serotoninergic systems and the influence of these phenomena on the pathogenesis of anxiety. Hence, searching for chemical agents with a multifunctional pharmacodynamic profile may bring highly effective therapy for CNS disorders. This study presents a deep structural insight into the hydantoin-arylpiperazine group and their serotonin/α-adrenergic activity. The newly synthesized compounds were tested in the radioligand binding assay and the intrinsic activity was evaluated for the selected derivatives. The computer-aided SAR analysis enabled us to answer questions about the influence of particular structural fragments on selective vs. multifunctional activity. As a result of the performed investigations, there were two leading structures: (a) compound 12 with multifunctional adrenergic-serotonin activity, which is a promising candidate to be an effective anxiolytic agent; (b) compound 14 with high α_1A/α_1D affinity and selectivity towards α_1B, which is recommended due to the elimination of probable cardiotoxic effect. The structural conclusions of this work provide significant support for future lead optimization in order to achieve the desired pharmacodynamic profile in searching for new CNS-modulating agents.     

Is Bitcoin Still a King? Relationships between Prices,Volatility and Liquidity of Cryptocurrencies during the Pandemic

We try to establish the commonalities and leadership in the cryptocurrency markets by examining the mutual information and lead-lag relationships between Bitcoin and other cryptocurrencies from January 2019 to June 2021. We examine the transfer entropy between volatility and liquidity of seven highly capitalized cryptocurrencies in order to determine the potential direction of information flow. We find that cryptocurrencies are strongly interrelated in returns and volatility but less in liquidity. We show that smaller and younger cryptocurrencies (such as Ripple’s XRP or Litecoin) have started to affect the returns of Bitcoin since the beginning of the pandemic. Regarding liquidity, the results of the dynamic time warping algorithm also suggest that the position of Monero has increased. Those outcomes suggest the gradual increase in the role of privacy-oriented cryptocurrencies.     

Superheating of silicon nanocrystals observed by Raman spectroscopy

In the Raman spectra of silicon nanocrystals a new anomalous component was detected. Close to the usual first order Raman peak situated for a bulk crystal at 521 cm⁻¹ at room temperature, two peaks arise shifting towards lower energy and demonstrating a huge temperature increase, as measured by the ratio of the Stokes/anti-Stokes peak intensities. This behavior is dependent on the laser power and on the morphology of the nanocrystals. We can exclude, however, confinement effects, although surface enhanced phonon modes could be responsible of such superheating. Alternative explanations are also suggested and discussed.     

2,3‐Dihydro‐1,3‐benzothiazol‐2‐iminium monohydrogen sulfate and 2‐iminio‐2,3‐dihydro‐1,3‐benzothiazole‐6‐sulfonate: a combined structural and theoretical study

The 2‐aminobenzothiazole sulfonation intermediate 2,3‐dihydro‐1,3‐benzothiazol‐2‐iminium monohydrogen sulfate, C₇H₇N₂S⁺·HSO₄⁻, (I), and the final product 2‐iminio‐2,3‐dihydro‐1,3‐benzothiazole‐6‐sulfonate, C₇H₆N₂O₃S₂, (II), both have the endocyclic N atom protonated; compound (I) exists as an ion pair and (II) forms a zwitterion. Intermolecular N—H...O and O—H...O hydrogen bonds are seen in both structures, with bonding energy (calculated on the basis of density functional theory) ranging from 1.06 to 14.15 kcal mol⁻¹. Hydrogen bonding in (I) and (II) creates DDDD and C(8)C(9)C(9) first‐level graph sets, respectively. Face‐to‐face stacking interactions are observed in both (I) and (II), but they are extremely weak.     

Synthesis and in vitro antibacterial evaluation of 1‐substituted‐4‐ethoxycarbonylmethylthiosemicarbazides and products of their dehydrocyclization

A series of s‐triazoles and thiohydantoines were synthesized by dehydrocyclization of 1‐substituted‐4‐ethoxycarbonylmethylthiosemicarbazides. The molecular structure proposed for s‐triazoles was confirmed by the X‐ray crystal structure analysis of one compound that was prone to crystallization. All compounds were tested in vitro for their antibacterial activity. Some of them showed low levels of activity against Gram‐positive species, MIC range 100–400 μg/mL or higher. © 2010 Wiley Periodicals, Inc. Heteroatom Chem 21:131–138, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20597     

Surface Studies on Glass Powders Used in Commercial Glass-Ionomer Dental Cements

The surface properties of three commercial ionomer glass powders, i.e., Fuji IX, Kavitan Plus and Chemadent G-J-W were studied. Samples were analyzed by X-ray fluorescence spectroscopy (XRF), and the density was determined by gas pycnometry. Morphology was studied using scanning electron microscopy (SEM) and laser diffraction (LD) technique, whereas low-temperature nitrogen sorption measurements determined textural parameters like specific surface area and pore volume. Thermal transformations in the materials studied were evaluated by thermogravimetric analysis (TGA), which was carried out in an inert atmosphere between 30 °C and 900 °C. XRF showed that Fuji IX and Kavitan Plus powders were strontium-based, whereas Chemadent G-J-W powder was calcium-based. Powders all had a wide range of particle sizes under SEM and LD measurements. Specific surface areas and pore volumes were in the range 1.42–2.73 m²/g and 0.0029 to 0.0083 cm³/g, respectively, whereas densities were in the range 2.6428–2.8362 g/cm³. Thermogravimetric analysis showed that the glass powders lost mass in a series of steps, with Fuji IX powder showing the highest number, some of which are attributed to the dehydration and decomposition of the polyacrylic acid present in this powder. Mass losses were more straightforward for the other two glasses. All three powders showed distinct losses at around 780 °C and 835 °C, suggesting that similar dehydration steps occur in all these glasses. Other steps, which differed between glass powders, are attributed to variations in states of water-binding on their surfaces.