Counter-Ion Influence on Polypyrrole Potentiometric pH Sensitivity

The pH sensitivity of conducting polymer films is an important issue from the sensor design point of view. The doping and supporting electrolyte anions effect on the potentiometric sensitivity and response time of polypyrrole (PPy) electrodes towards changes of solution pH were studied. It was found that (i) the response of PPy doped by easily exchangeable common anions (Cl^–, NO₃ ^–, ClO₄ ^–) in their solutions (KCl, KNO₃, NaClO₄) is slow. In contrast, (ii) polypyrrole films deposited in the presence of weak acid anions (phthalates, oxalates, salicylates) were characterised by instantaneous responses in the above mentioned solutions. On the basis of electrochemical experiments (open circuit potential vs. time dependencies, cyclic voltammetry, EQCM), the observed differences were attributed to different mechanisms of pH sensitivity of tested films. The long response times are related to the incorporation of the solution ions into the film in order to compensate charges created due to protonation. On the other hand, if the ion-exchange is hindered as in the case of (ii), instantaneous open circuit responses are observed due to polarisation of the oxidised polymer layer, analogously to the metal electrode. Moreover, for these films the internal pH buffering within the polymer membrane will weaken the pH change effect.The mechanisms were confirmed in the course of studying the pH effect in solutions containing anions easily (KCl, NaClO₄, KNO₃) or hardly exchangeable with polypyrrole (K₂SO₄, sodium poly(4-styrenesulphonate) solutions) acidified with H₂SO₄.     

Concentration Dependence of Anti- and Pro-Oxidant Activity of Polyphenols as Evaluated with a Light-Emitting Fe2+-Egta-H2O2 System

Hydroxyl radical (^•OH) scavenging and the regeneration of Fe²⁺ may inhibit or enhance peroxidative damage induced by a Fenton system, respectively. Plant polyphenols reveal the afore-mentioned activities, and their cumulative net effect may determine anti- or pro-oxidant actions. We investigated the influence of 17 phenolics on ultra-weak photon emission (UPE) from a modified Fenton system (92.6 µmol/L Fe²⁺, 185.2 µmol/L EGTA (ethylene glycol-bis(β-aminoethyl-ether)-N,N,N′,N,-tetraacetic acid) and 2.6 mmol/L H₂O₂ pH = 7.4). A total of 8 compounds inhibited (antioxidant effect), and 5 enhanced (pro-oxidant effect) UPE at all studied concentrations (5 to 50 µmol/L). A total of 4 compounds altered their activity from pro- to antioxidant (or vice versa) along with increasing concentrations. A total of 3 the most active of those (ferulic acid, chlorogenic acid and cyanidin 3-O-glucoside; mean UPE enhancement by 63%, 5% and 445% at 5 µmol/L; mean UPE inhibition by 28%, 94% and 24% at 50 µmol/L, respectively) contained catechol or methoxyphenol structures that are associated with effective ^•OH scavenging and Fe²⁺ regeneration. Most likely, these structures can determine the bidirectional, concentration-dependent activity of some phenolics under stable in vitro conditions. This is because the concentrations of the studied compounds are close to those occurring in human fluids, and this phenomenon should be considered in the case of dietary supplementation with isolated phenolics.     

Ab initio optical rotatory dispersion and electronic circular dichroism spectra of (S)-2-chloropropionitrile

Coupled-cluster and density-functional methods have been used to determine specific rotations and electronic circular dichroism (ECD) rotational strengths for (S)-2-chloropropionitrile. Coupled-cluster specific rotations using both the length- and velocity-gauge representations of the electric-dipole operator, computed with basis sets of triple-zeta quality containing up to 326 functions, compare very well with recently reported gas-phase cavity-ring-down polarimetry data. ECD rotational strengths for the six lowest-lying excited states are found to vary in sign, and the second excited state, which has a larger rotational strength than the first by a factor of 4, was found to yield a much larger contribution (by a factor of 10) to the overall negative specific rotation observed both experimentally and theoretically. However, both valence and Rydberg states appear to make substantial contributions to the total rotation, often of opposite sign from the converged/linear-response result. Furthermore, the sum-over-states approach was found to be inadequate for reproducing the specific rotations derived from the linear-response approach, even when 100 excited states (well beyond the estimated ionization limit) were included in the summation. Density-functional specific rotations using the B3LYP functional with basis sets of quadruple-zeta quality containing up to 588 functions are found to be too large compared to experiment by approximately a factor of 2. This error appears to be related to both the underestimation of the electronic excitation energies, as well as concomitant overestimation of the corresponding ECD rotational strengths. Although earlier studies reported good agreement between density-functional specific rotations and experiment when electric-field-dependent functions were used in conjunction with a double-zeta-quality basis set, the results reported here, which are near the basis-set limit, suggest that this agreement may be fortuitous.     

The investigation of femoroacetabular impingement using motion capture,FEM and multi-body simulations

In recent years, femoroacetabular impingement (FAI) has become increasingly common. As published in the literature, FAI is caused by an unphysiological contact between the proximal femur and the acetabular rim, which may lead to pain, limitation of movement, and damage of cartilage. In this paper, patient-specific finite element simulations of the movement of the hip based on gait motion data and MRI segmentation were conducted to check stresses of the acetabulum and femur, and additionally whether a bony contact is present or not. The study's findings show no bony contact between femur and acetabulum, which may lead to the hypothesis that the labrum and its deformation and/or the articular capsule are involved in the mechanism of FAI. In order to verify this hypothesis more simulations including labrum and capsule must be performed. (© 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Surface‐enhanced Raman scattering investigations on silver nanoparticles deposited on alumina and titania nanotubes: influence of the substrate material on surface‐enhanced Raman scattering activity of Ag nanoparticles

Silver nanoparticles deposited on various ‘inert’ porous materials (mainly Al₂O₃ and TiO₂) are often used as substrates for surface‐enhanced Raman scattering (SERS) measurements. In this study, we used the sputter deposition technique to cover tubular arrays of Al₂O₃ and TiO₂ with Ag nanoparticles. Raman spectra of pyridine (as a probe molecule) and of two selected dyes (5‐(4‐dimethylaminobenzylidene)rhodanine and 5‐(4‐(dimethylamino)benzylidene)‐3‐(3‐methoxypropyl)rhodanine) adsorbed on fabricated Ag/TiO₂‐n/Ti and Ag/Al₂O₃‐n/Al substrates were measured. We found that the SERS spectra of pyridine adsorbed on Ag nanoparticles deposited on an Al₂O₃‐n/Al substrate are distinctly different from those measured for an Ag/TiO₂‐n/Ti composite. Similar effects were observed for dyes adsorbed on the surface of both composites. The spectral differences between two kinds of composites (Ag/TiO₂‐n/Ti and Ag/Al₂O₃‐n/Al) are discussed in terms of (1) the modified electronic structure of the Ag nanoparticles due to their interaction with different substrate materials and (2) the different atomic topology of the metal particles thus deposited on the surfaces of the substrates. Composite samples were also studied with the aid of scanning electron microscopy (SEM) and Auger electron spectroscopy (AES) to reveal their characteristic morphological and chemical features. Copyright © 2012 John Wiley & Sons, Ltd.     

Chemical Composition,Antioxidant and Antimicrobial Activity of Raspberry,Blackberry and Raspberry-Blackberry Hybrid Leaf Buds

In our investigation, the chemical composition and bioactive potential of leaf buds of raspberry, blackberry, and a raspberry-blackberry hybrid were determined. Antioxidant and antimicrobial properties were tested in water (W), ethanol-water (EW), and glycerol-water (GW) extracts from the buds. These plant organs contain relatively large amounts of minerals, especially Fe. The total antioxidant capacity (TAC) measured by the ABTS and DPPH methods ranged from 2.86 to 12.19 and 6.75 to 24.26 mmol per 100 g fresh weight (FW) of buds, respectively. TAC values were generally higher in the raspberry than in the case of blackberry and raspberry-blackberry hybrid extracts. The antioxidant properties of the extracts were strongly positively correlated with their content of total phenolic (TP). No such relationship was noted for ascorbic acid (AA), whose concentration in all extracts was at a similarly low level. Antioxidant properties determined in vitro were confirmed for the GW extract from raspberry leaf buds in biological test based on the growth parameters of Δsod1 Saccharomyces cerevisiae mutant cells in hypertonic medium. The extracts also exhibited strong antibacterial properties against Staphylococcus aureus and Enterococcus faecalis and weaker against Enterobacter aerogenes. The studied leaf buds could be therefore an unconventional source of minerals, natural antioxidants and antibacterial compounds with potential applications in the food, pharmaceutical, and cosmetics industries.     

A quantitative thermal analysis of cyclists’ thermo-active base layers

It is well known that clothes used in sporting activity are a barrier for heat exchange between the environment and athlete, which should help in thermoregulation improvement. However, it is difficult to evaluate which top is best for each athlete according to the characteristics of the sport. Researchers have tried to measure the athlete’s temperature distribution during exercise at the base layers of tops with different approaches. The aim of this case study was to investigate the use of thermography for thermo-active base layer evaluation. Six new base layers were measured on one cyclist volunteer during a progressive training on a cycloergometer. As a control condition, the skin temperature of the same volunteer was registered without any layer with the same training. A training protocol was selected approximate to cycling race, which started from the warm-up stage, next the progressive effort until the race finished and at the end “cool-down” stage was over. In order to show which layer provided the strongest and weakest barrier for heat exchange in comparison with environment, the temperature parameters were taken into consideration. The most important parameter in the studies was the temperature difference between the body and the layers, which was changing during the test time. The studies showed a correlation between the ergometer power parameter and the body temperature changes, which has a strong and significant value. Moreover, the mass of every layer was checked before and after the training to evaluate the mass of the sweat exuded during the test. From this data, the layer mass difference parameter was calculated and taken into consideration as a parameter, which may correspond with the mean heart rate value from each training. A high and positive correlation coefficient was obtained between the average heart rate and the mass difference for the base layers. Thermal analysis seems to have a new potential application in the objective assessment of sports clothing and may help in choosing the proper clothes, which could support heat transfer during exercising and protect the body from overheating.

     

Synthesis and antimicrobial evaluation of new 1‐{[4‐(4‐Halogenophenyl)‐4H‐1,2,4‐ triazol‐3‐yl]sulfanyl}acetyl‐4‐substituted thiosemicarbazides and products of their cyclization

By the reaction of hydrazides of 4‐(4‐halogenophenyl)‐4H‐1,2,4‐triazol‐3‐yl‐sulfanyl acetic acid with isothiocyanate, 1‐acyl‐4‐substituted thiosemicarbazide derivatives ( 7–19 ) were obtained. The cyclization of compounds ( 7–19 ) in the presence of 2% NaOH led to the formation of compounds ( 20–26 ) containing two 1,2,4‐triazole rings connected by a methylenesulfanyl group. The new compounds were tested for their in vitro antimicrobial activity. Some of the tested compounds ( 9, 12, 18, 21, 22 ) showed activity against the reference strains of Gram‐positive bacteria with the MIC (minimal inhibitory concentration) = 125 to >1000 μg/mL. © 2011 Wiley Periodicals, Inc. Heteroatom Chem 23:117–121, 2012; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20758     

Thermal properties of fats extracted from powdered baby formulas

The aim of this research was to analyse composition, fatty acids distribution and oxidative stability of fats extracted from four samples of baby formulas. The fats were oxidized in a differential scanning calorimeter (DSC) under polythermal (dynamic) conditions and at normal pressure. The DSC experiments were carried out in an oxygen flow atmosphere using different, linearly programmed, heating rates in the range of 4?C12.5?°C/min. The extrapolated onset temperatures were determined using DSC exotherms and used for the assessment of the thermal oxidative stabilities of the samples. Activation energies (E _a), pre-exponential factors (Z) and reaction rate constants (k) for oil oxidation under DSC conditions were calculated using the Ozawa?CFlynn?CWall method and the Arrhenius equation. The melting characteristics of the studied fats were obtained. The fats extracted from the agglomerated samples with higher onset temperatures were more stable than the fats extracted from the initial samples of baby formulas.     

Formation of Intermediate Layers for Immobilization of Biomacromolecules by Self‐Assembling and Reduction of Phenyldiazonium Salts. A Comparative Study

Two types of biomolecules were tested in the comparison of usefulness of two ways of formation of the intermediate layers at electrodes: a 20‐nucleotide DNA sequence and glucose oxidase. Chronocoulometric, amperometric, electrochemical impedance and PM‐IRRAS experiments proved that the layers obtained by electroreduction of diazonium salts are much more stable and more efficient in the accumulation of biomolecules compared to layers obtained by self‐assembling of appropriate thiols.