Supplementation with Magnesium Salts—A Strategy to Increase Nutraceutical Value of Pleurotus djamor Fruiting Bodies

The use of substrates supplemented with minerals is a promising strategy for increasing the nutraceutical value of Pleurotus spp. The current research was performed to analyze the effect of substrate supplementation with magnesium (Mg) salts on the Mg content, biomass, and chemical composition of pink oyster mushroom (Pleurotus djamor) fruiting bodies. Before inoculation, substrate was supplemented with MgCl₂ × 6 H₂O and MgSO₄, both salts were applied at three concentrations: 210, 420, and 4200 mg of Mg per 2 kg of substrate. The harvest period included three flushes. Substrate supplementation with 4200 mg of Mg caused the most significant decrease in mushroom productivity, of about 28% for both Mg salts. The dry matter content in fruiting bodies was significantly lower in the treatment in which 210 mg of Mg was applied as MgSO₄ in comparison to the control. Supplementation effectively increased the Mg content in fruiting bodies of P. djamor by 19–85% depending on the treatment, and significantly affected the level of remaining bioelements and anions. One hundred grams of pink oyster fruiting bodies, supplemented with Mg salts, provides more than 20% of the Mg dietary value recommended by the Food and Drug Administration (FDA); thus, supplementation can be an effective technique for producing mushrooms that are rich in dietary Mg. Although P. djamor grown in supplemented substrate showed lower productivity, this was evident only in the fresh weight because the differences in dry weight were negligible. Mg supplementation increased the antioxidant activity of the fruiting bodies, phenolic compounds, and some amino acids, including L-tryptophan, and vitamins (thiamine and l-ascorbic acid).     

Improvement of the Derjaguin-Broekhoff-de Boer theory for the capillary condensation/evaporation of nitrogen in spherical cavities and its application for the pore size analysis of silicas with ordered cagelike mesopores

In a previous work, we proposed an improvement of the Derjaguin-Broekhoff-de Boer (DBdB) theory for capillary condensation/evaporation in open-ended cylindrical mesopores. In this paper, we report a further extension of this approach to the capillary condensation/evaporation of nitrogen in siliceous spherical cavities. The main idea of this improvement is to employ the Gibbs-Tolman-Koenig-Buff equation to predict the variation of the surface tension in spherical mesopores. In addition, the statistical film thickness (the so-called t-curve), which is evaluated accurately on the basis of adsorption isotherms measured for MCM-41 materials, is used instead of the originally proposed t-curve to take into account the excess chemical potential due to the surface forces. It is shown that the aforementioned modifications of the original DBdB theory that was refined by Ravikovitch and Neimark have significant implications for the pore size analysis of cagelike mesoporous silicas. To verify the proposed improvement of the DBdB pore size analysis (IDBdB), two series of FDU-1 samples, which are well-defined cagelike mesoporous materials (composed of siliceous spherical cavities interconnected by short necks), were used for the evaluation of the pore size distributions (PSDs). The correlation between the spinodal condensation point in the spherical pores predicted by the nonlocal density functional theory (NDFT) developed by Ravikovitch and Neimark and that predicted by the IDBdB theory is very good in the whole range of mesopores. This feature is mirrored to the realistic PSD characterized by the bimodal structure of pores computed from the IDBdB theory. As in the case of open-ended cylindrical pores, the improvement of the classical DBdB theory preserves its simplicity and simultaneously ensures a significant improvement of the pore size analysis, which is confirmed by the independent estimation of the average pore size by the NDFT and the powder X-ray diffraction method.     

The C(2)1pi(u) state of Na2 molecule studied by polarization labelling spectroscopy method

The C1pi(u) <-- X1sigma(g)+ system of Na2 is studied by the polarization labelling spectroscopy technique. Accurate molecular constants are derived for the observed levels nu = 0-12, J = 12-100 in the C1pi(u) state.     

Calorimetric investigation of the adsorption of binary vapour mixtures of tetrahydropyrrol with methanol and cyclopentane on the homogeneous surface

Adsorption isotherms and differential heats of adsorption of tetrahydropyrrol (THP) and cyclopentane CP), as well as THP and methanol mixtures (mole ratio 1∶1, 1∶2 and 1∶4) on the graphitized carbon black Sterling MT surface were determined. The influence of dilution of [THP] on its ability to undergo homomolecular association was tested. Even 1∶4 dilution of THP does not prevent is association. Methanol strongly interacts with THP in the mixed adsorbed layer forming heteromolecular associates.     

Collisional population of the 23 ∏ g state inK 2

We have measured the effect of potassium vapour pressure within the heat-pipe oven on the shape of the 2³ ∏ _g ?1³∑ _u ⁺ fluorescence induced by collision energy transfer from theC ¹∏ _u state which was optically excited by the 457.9 nm argon-ion laser line. The estimated cross section of that process is 300 Ų. The simulation of the diffuse band shape indicates a non-thermalised vibrational distribution in the 2³ ∏ _g state.     

Classification of generic 3-dimensional Lagrangian singularities with (Z2) l -symmetries

The paper provides the complete list of local models forZ ₂ ^l -invariant generic germs of Lagrangian submanifolds of dimension ≦3. Classification is done directly for genrating functions of Lagrangian submanifolds and contains both elementary singularities and non-elementary ones with continuous moduli. The results demonstrate, in particular, that in contrast to the non-equivariant case the classification of equivariant Lagrangian singularities is not subordinated to the classification of symmetric functions up to the right equivariant equivalences.     

Estimating the pore size distribution of activated carbons from adsorption data of different adsorbates by various methods

Experimental adsorption isotherms of four adsorbates (N2, Ar, C6H6, and CCl4) as well as adsorption enthalpy (C6H6 and CCl4) measured on two strictly microporous carbons are used to evaluate the porosity of adsorbents (i.e., pore size distributions (PSDs) and average pore diameter ( Lav )). The influence of the diameter of adsorbates ( dA) as well as of the temperature ( T ) is analyzed in order to explain the differences or similarities between the above-mentioned quantities for all systems. Proposed previously, the general relationships between the parameters of the Dubinin-Astakhov (DA) isotherm equation (the characteristic energy of adsorption ( E0 ) and the exponent of this equation ( n )) and the average slit-width of carbon micropores are investigated. Moreover, the thermodynamic verification of the Horvath-Kawazoe (HK) theory and the ND model is presented based on data of the adsorption and enthalpy of adsorption of benzene and carbon tetrachloride on two carbons. Finally, the pore diameters calculated from calorimetry data using the Everett and Powl method and those calculated applying the recently developed equations are compared. In our opinion the change of apparent PSD should be monitored by performing a series of isotherm measurements from high (equal and higher than room temperature) to low temperatures (ca. 77.5 K) as was presented in the current study. Moreover, the analysis of the experimental data leads to the conclusion that the entropy of C6H6 and CCl4 can approach to the values characteristic of quasi-solid (a partially ordered structure). Therefore, this behavior of the adsorbate should be taken into consideration in the theoretical assumptions of model and its thermodynamic verification.     

A regularized inverted perturbation approach method: potential energy curve of the 4 (1)Sigma(u) (+) state in Na(2)

We describe a modification of the inverted perturbation approach method allowing to construct physically sensible potential energy curves for electronic states of diatomic molecules even when some parts of the potential are not adequately characterized by the experimental data. The method is based on a simple regularization procedure, imposing an additional constraint on the constructed potential curve. In the present work it is applied to the double minimum 4 (1)Sigma(u) (+) state of Na(2), observed experimentally by polarization labeling spectroscopy technique.     

Chemoselective Removal of Protecting Groups from O-Glycosyl Amino Acid and Peptide (Methoxyethoxy)ethyl Esters Using Lipases and Papain

The selective C-terminal deprotection of O-glycopeptide (methoxyethoxy)ethyl esters is achieved under mild conditions (pH 6.6, 37 degrees C) by enzymatic hydrolysis using papain or lipase M from Mucor javanicus to give building blocks useful for chain-extending glycopeptide synthesis. On the other hand, the selective removal of acetyl protecting groups from the saccharide portion of glycopeptides is accomplished by alternative enzymatic hydrolysis with lipase WG from wheat germ to furnish model substrates for enzymatic glycosyl transfer reactions in order to extend the carbohydrate side chain of these conjugates.     

Conducting polymer membranes for low activity potentiometric ion sensing

Conducting polymer (CP) films, used as ion-sensing membranes under open circuit potentiometric conditions, are usually characterised with rather high detection limit, in the range of 10⁻⁴-10⁻⁵ mol dm⁻³. This effect is unfavourable, not only from the point of view of CP applications in potentiometry as ion sensitive membranes, but also when these materials are used as ion-to-electron transducers (solid contacts) for ion-selective electrodes. The theoretical considerations presented underline the crucial role of spontaneous processes of polymer charging/discharging—the source of observed high detection limit of sensors comprising CP layer under zero current conditions. Although the mechanism of occurring process is different from that observed for plastic, solvent polymeric based ion-selective electrodes, the ultimate result—alteration of activity of electrolyte at the membrane/solution interface leading to elevation of the detection limit—is the same.The method of estimation of parameters characterising spontaneous charge transfer processes is presented. The values obtained can be used to calculate the resulting polymer/solution interface activity of electrolyte ions, thus the detection limit of CP membrane can be theoretically predicted.A method of lowering of the detection limit of conducting polymer membranes, applying galvanostatic polarisation to compensate the spontaneous process of polymer charging/discharging, is presented.The experimental results obtained for poly(pyrrole), poly(N-methylpyrrole) and poly(3,4-ethylenedioxythiophene) are in good accordance with predictions of the presented model.