Potential for micromachined actuation of ultra-wide continuously tunable optoelectronic devices

Tailored scaling represents a principle of success that, both in nature and in technology, allows the effectiveness of physical effects to be enhanced. Mutation and selection in nature are imitated in technology, e.g. by model calculation and design. Proper scaling of dimensions in natural photonic crystals and our fabricated artificial 1D photonic crystals (DBRs, distributed Bragg reflectors) enable efficient diffractive interaction in a specific spectral range. For our optical microsystems we illustrate that tailored miniaturization may also increase the mechanical stability and the effectiveness of spectral tuning by thermal and electrostatic actuation, since the relative significance of the fundamental physical forces involved considerably changes with scaling. These basic physical principles are rigorously applied in micromachined 1.55-μm vertical-resonator-based devices. We modeled, implemented and characterized 1.55-μm micromachined optical filters and vertical-cavity surface-emitting laser devices capable of wide, monotonic and kink-free tuning by a single control parameter. Tuning is achieved by mechanical actuation of one or several air-gaps that are part of the vertical resonator including two ultra-highly reflective DBR mirrors of strong refractive index contrast: (i) Δn=2.17 for InP/air-gap DBRs (3.5 periods) using GaInAs sacrificial layers and (ii) Δn=0.5 for Si₃N₄/SiO₂ DBRs (12 periods) with a polymer sacrificial layer to implement the air-cavity. In semiconductor multiple air-gap filters, a continuous tuning of >8% of the absolute wavelength is obtained. Varying the reverse voltage (U=0–5 V) between the membranes (electrostatic actuation), a tuning range of >110 nm was obtained for a large number of devices. The correlation of the wavelength and the applied voltage is accurately reproducible without any hysteresis. In two filters, tuning of 127 and 130 nm was observed for about ΔU=7 V. The extremely wide tuning range and the very small voltage required are record values to the best of our knowledge. For thermally actuated dielectric filters based on polymer sacrificial layers, Δλ/ΔU=-7 nm/V is found. Received: 10 May 2002 / Published online: 8 August 2002     

Magnetic anisotropy of textured CrO2 thin films investigated by X-ray magnetic circular dichroism

Highly a-axis-textured CrO₂ films have been deposited on Al₂O₃ (0001) substrates by chemical vapor deposition. CrO₂ has been found to have highly a-axis (010)-oriented columnar growth on a Cr₂O₃ (0001) initial layer. The six-fold surface symmetry of the Cr₂O₃ initial layer leads to three equivalent in-plane orientations of the a-axis-oriented CrO₂ unit cell. We report Cr L_2,3 X-ray magnetic circular dichroism data along the surface normal and at 60° off-normal sample orientation. For a 60° sample alignment, a strong increase of the projected orbital moment could be observed for unoccupied majority t_2g states using moment analysis. Therefore, the c axis is identified as the intrinsic magnetic easy axis of CrO₂. In addition, a small spin moment and a very strong magnetic dipole term T_z have been found. Received: 8 January 2002 / Accepted: 8 January 2002     

Ultrashort-pulse dual-wavelength source for digital holographic two-wavelength contouring

Digital holographic shape measurements using femtosecond laser pulses are reported. For contouring of very fast moving objects, the simultaneous generation of at least two spectrally separated ultrashort pulses is required. To deliver this particular spectral signature at high pulse energies, a chirped-pulse Ti:sapphire laser amplifier was modified to emit two spectrally separated pulses with energies above 1 μJ each. The wavelength separation of these pulses was adjustable within the 50 nm gain bandwidth, cutting out two distinct wavelength peaks by a variable double-slit assembly in a prism sequence. A Michelson-type interferometer was employed to perform the two-wavelength contouring. The phases of the holograms and the phase differences are calculated numerically, which allow us to deduce the contour lines of the topology of the object. The suitability of the light source for digital holography is demonstrated with contouring of stationary objects and the potential for high-speed applications is indicated. PACS 42.40.-i; 42.60.By     

Spray thermometry using thermographic phosphors

In this study a novel technique for 2D spray temperature measurement is presented. For this purpose the thermographic phosphor (TP) Mg₄GeO_5.5F:Mn was dispersed in n-dodecane and atomised using a conventional semi solid-cone nozzle. The thermographic phosphor was excited electronically by a frequency tripled Nd:YAG laser (355 nm). An ICCD-camera in combination with an image doubler detected the subsequently emitted phosphorescence at both peak emission wavelengths located at 633 nm and 659 nm, respectively. Utilising suitable calibration measurements, the local spray temperature was determined by evaluating the intensity ratio of both emission wavelengths. To the knowledge of the authors this is the first approach of spray temperature measurement exploiting the temperature dependent intensity ratio of thermographic phosphors. PACS 07.20.Dt; 32.50.+d     

Modification of single molecule fluorescence by a scanning probe

We examine the optical near-field interaction between different types of scanning tips and single oriented fluorescent molecules. We demonstrate the influence of a tip on the excitation intensity as well as on the integrated fluorescence signal, the excited state lifetime, and the angular emission of single molecules. By using a standard model describing the radiation of an oscillating dipole close to a nanosphere or a flat interface, we interpret our observations and describe some central criteria for obtaining fluorescence enhancement or quenching. PACS 33.80.-b; 07.79.Fc; 78.90.+t     

Working group report: Quantum chromodynamics

This is the report of the subgroup QCD of Working Group-4 at WHEPP-9. We present the activities that had taken place in the subgroup and report some of the partial results arrived at following the discussion at the working group meetings.     

Directed and elliptic flow in 197Au+197Au at intermediate energies

Directed and elliptic flow for the ¹⁹⁷Au+¹⁹⁷Au system at incident energies between 40 and 150 MeV per nucleon has been measured using the INDRA 4π multi-detector. For semi-central collisions, the excitation function of elliptic flow shows a transition from in-plane to out-of-plane emission at around 100 MeV per nucleon. The directed flow changes sign at a bombarding energy between 50 and 60 MeV per nucleon and remains negative at lower energies. Molecular dynamics calculations (CHIMERA) indicate sensitivity of the global squeeze-out transition on the σ _NN and demonstrate the importance of angular momentum conservation in transport codes at low energies.     

Working group report: Collider Physics

This is summary of the activities of the working group on collider physics in the IXth Workshop on High Energy Physics Phenomenology (WHEPP-9) held at the Institute of Physics, Bhubaneswar, India in January 2006. Some of the work subsequently done on these problems by the subgroups formed during the workshop is included in this report.     

Precision of a dual energy X-ray absorptiometry device

The standard method to diagnose and follow-up osteoporosis is the measurement of bone mineral density (BMD) using dual X-ray absorptiometry (DEXA). Manufacturers' manuals of DEXA devices state the intrascanner coefficient of variance is less than 0.01 g/cm². The aim of this study was to evaluate the in vivo coefficient of variance of a Lunar DPX scanner in male and female healthy adult subjects. Average BMD for females and males were 1.170±0.091 g/cm² and 1.272±0.115 g/cm², respectively. Monthly phantom measurements provided and controlled by the manufacturer were 1.243±0.008 g/cm² (range 1.222 to 1.257) and the coefficient of variance was 0.006. It is concluded that the in vivo coefficient of variance of DEXA devices can slightly be higher than that proposed by the manufacturer. This revised version was published online in August 2006 with corrections to the Cover Date.