Synthesis of composite films of mixed Ag-Cu nanocrystallites embedded in DLC matrix and associated surface plasmon properties

Diamond-like carbon films containing Ag and Cu in nanocrystalline form were deposited onto SnO₂-coated glass substrates by electrochemical technique. Relative amount of silver and copper to be incorporated in the DLC matrix was tailored by varying the amount of silver and copper containing salts in the electrolyte. Current density was adjusted to obtain films with different crystallite size while the volume fraction of the metal nanocrystallites was altered by varying the dilution of the solution containing the salts. Raman studies indicated the presence of two peaks located at ∼1350 cm⁻¹ (D-line) and 1566 cm⁻¹ (G-line) for all the films and the relative intensities of these peaks changed with the amount of metal incorporation in it. The FTIR spectra were seen to be dominated by a peak at 975 cm⁻¹ for C-H out of plane deformation modes along with peaks for C-H bending, C-H stretching and C-C stretching modes at 858, 1113 and 1189 cm⁻¹, respectively. The optical absorption spectra showed a single plasmon band instead of two characteristic bands for Ag and Cu. We ascribe this to nanophase limited interfacial alloying at the Ag-Cu interface. The experimental observation was analyzed in the light of Mie theory.     

Orientation-dependent C60 electronic structures revealed by photoemission spectroscopy

We observe, with angle-resolved photoemission, a dramatic change in the electronic structure of two C60 monolayers, deposited, respectively, on Ag (111) and (100) substrates, and similarly doped with potassium to half filling of the C60 lowest unoccupied molecular orbital. The Fermi surface symmetry, the bandwidth, and the curvature of the dispersion at Gamma point are different. Orientations of the C60 molecules on the two substrates are known to be the main structural difference between the two monolayers, and we present new band-structure calculations for some of these orientations. We conclude that orientations play a key role in the electronic structure of fullerides.     

Electrical resistivity of the alkaline earth metals Ca,Sr and Ba in the 50–300K temperature region

The computed values of the temperature dependent electrical resistivity is presented for the alkaline earth metals Ca, Sr and Ba. Numerical values of the mean free paths obtained using a finite mean free path approach is also reported. The structure factor has been evaluated using experimental values for the phonon spectra while local model potentials were used for the form factors. Our numerical results compare favourably with experiments.     

Effects of divalent alkaline earth ions on the magnetic and transport features of La0.65A0.35Mn0.95Fe0.05O3 (A = Ca, Sr, Pb, Ba) compounds

We have studied the magnetic and transport properties of Fe doped La_0.65A_0.35Mn_0.95Fe_0.05O₃ (A = Ca, Sr, Pb, Ba) manganites. All the compositions show ferromagnetic/metal to paramagnetic/insulator transition (T_C) except the Pb doped sample which is insulating and ferromagnetic (FM) in the entire temperature range. The magnetization and T_C are decreased by decreasing the cation size on La site. The transition temperature and magnetic moment at 77 K is a maximum for Sr doped sample and is decreasing if we increase or decrease the cation size from Sr size. The maximum value of T_C and magnetic moment for Sr based sample is most likely due to the closer ionic sizes of La and Sr as compared to the other dopants (Ca, Pb, and Ba). We observed a spin freezing type effect in the Pb doped sample below 120 K in resistivity, ac susceptibility and in magnetization. This suggests that the AFM interactions introduced by the Fe are most effective in the Pb doped composition leading to increased competition between the FM and AFM interactions. This FM and AFM interaction generates some degree of frustration leading to the appearance of spin glass like phase whose typical magnetic behavior is studied for small ion when the metallic like behavior is lost.     

Electrophoretic deposition of PVA coated hydroxyapatite on 316L stainless steel

Polyvinyl alcohol (PVA) coated hydroxyapatite was deposited onto a 316L stainless steel substrate by electrophoretic deposition. Deposition was carried out in a methanol suspension at pH 5.5 using a graphite rod as an anode. Parameters such as PVA concentration, deposition voltage and time were optimized to achieve a homogeneous, crack-free adhesive coating. Techniques such as X-ray diffraction and Fourier transform infrared spectroscopy were used to study the phase composition of the coated materials and the stability of hydroxyapatite in the presence of PVA.     

Physiological Flow of Jeffrey Six Constant Fluid Model due to Ciliary Motion

The main purpose of this article is to present a mathematical model of ciliary motion in an annulus. In this analysis, the peristaltic motion of non-Newtonian Jeffrey six constant fluid is observed in an annulus with ciliated tips in the presence of heat and mass transfer. The effects of viscous dissipation are also considered. The flow equations of non-Newtonian fluid for the two-dimensional tube in cylindrical coordinates are simplified using the low Reynolds number and long wave-length approximations. The main equations for Jeffrey six constant fluid are considered in cylindrical coordinates system. The resulting nonlinear problem is solved using the regular perturbation technique in terms of a variant of small dimensionless parameter α. The results of the solutions for velocity, temperature and concentration field are presented graphically. B_k is Brinkman number, ST is soret number, and SH is the Schmidth number. Outcome for the longitudinal velocity, pressure rise, pressure gradient and stream lines are represented through graphs. In the history, the viscous-dissipation effect is usually represented by the Brinkman number.     

Synthesis and Studies of Fluorescein Based Derivatives for their Optical Properties,Urease Inhibition and Molecular Docking

Herein, we design and synthesized new fluorescein based derivatives by insitu formation of fluorescein ester and further treated with corresponding hydrazide and amine to yield respective compounds i.e. FB1, FB2, FB3 and FB4. The spectral purity and characterization was done by using IR, NMR and Mass spectroscopies. The synthesized derivatives were examined for their photophysical properties by using variety of organic solvents and results were discussed in details. The structural diversity of synthesized compounds motivate us to evaluate these compounds for urease inhibition. The compound FB3 (IC₅₀?=?0.0456 μM) shows 100 fold more active against Jack bean urease than standard drug thiourea (IC₅₀?=?4.7455 μM). Other synthesized compounds showed potent activity. Free radical percentage scavenging assay further supported the capacity of compounds to urease inhibition. While, molecular docking simulations helps to examine the molecular interactions of active compounds FB1, FB2, FB3 and FB4 within the binding site of urease enzyme.     

Second harmonic imaging of chloroplasts using the two-photon laser scanning microscope

BackgroundSecond harmonic information reveals information about the structure of spatially oriented structures with an asymmetry. We study the second harmonic images of the grana and intergranal parts of chloroplasts in the leaves of the shade moss Plagiomnium affine.ResultsA two-photon microscope with blocking filters to suppress fluorescence generated both forward and backward second harmonic illumination to be captured. In the starch free chloroplasts of the single cell layered laminae strong second harmonic generation (SHG) from the granal regions was emitted. Upon illumination the chloroplasts changed their orientation affecting the SHG signal. Chloroplast is reoriented upon illumination.ConclusionsSHG signals were successfully obtained from the grana without any possible confusion from SHG starch grains due to their absence.