Brillouin spectral deconvolution method for centimeter spatial resolution and high-accuracy strain measurement in Brillouin sensors

Combining a dc and a short pulse (approximately 1 ns) as the probe beam in the pump-probe configuration of Brillouin-based distributed sensors allows us to represent the Brillouin spectrum as a top Lorentzian-like portion and a bottom Gaussian-like portion. Because of the interaction of these two parts, the Lorentzian-like portion carries spatial information that can be extracted within centimeter spatial resolution. Using this information, we develop a spectrum deconvolution method, which considers the location correlation of the strain distribution, to find the number of Brillouin peaks and their frequencies in the top Lorentzian-like portion and hence achieve accurate strain information. An optimum level of dc to pulse power for the best signal and position detection capability is discussed.     

Paradox in Wave-Particle Duality

We report on the simultaneous determination of complementary wave and particle aspects of light in a double-slit type “welcher-weg” experiment beyond the limitations set by Bohr’s Principle of Complementarity. Applying classical logic, we verify the presence of sharp interference in the single photon regime, while reliably maintaining the information about the particular pinhole through which each individual photon had passed. This experiment poses interesting questions on the validity of Complementarity in cases where measurements techniques that avoid Heisenberg’s uncertainty principle and quantum entanglement are employed. We further argue that the application of classical concepts of waves and particles as embodied in Complementarity leads to a logical inconsistency in the interpretation of this experiment. A Preliminary version of this paper was presented by S.S.A. at a Seminar titled “Waving Copenhagen Good-bye: Were the Founders of Quantum Mechanics Wrong?,” Department of Physics, Harvard University, Cambridge, MA 02138, 23 March, 2004.     

Effect of multi-ethers and conventional alkoxysilanes as external donors on the 4th generation Ziegler-Natta catalysts for propylene polymerization

The multi-ether compounds with different numbers of methoxy groups containing 1,3-dimethoxy-2,2-bis(methoxymethyl)propane and 1-methoxy-2,2-bis(methoxymethyl)butane were synthesized using the Williamson reaction from pentaerythritol and 1,1,1-tris(hydroxymethyl)propane, respectively, in the presence of sodium hydride and methyl iodide in tetrahydrofuran and they were characterized by ¹H NMR, ¹³C NMR, and FTIR spectroscopy. These compounds were employed as external donors in the polymerization of propylene using the industrial Ziegler-Natta catalyst. A commercial spherical MgCl₂-supported Ziegler-Natta catalyst containing diisobutyl phthalate as the internal donor was used for the polymerization of propylene. The role of ether compounds and industrial alkoxysilanes on the properties of polypropylene were studied using the xylene solubility method, melt flow index, gel permeation chromatography, scanning electron microscopy, and differential scanning calorimetry. The addition of the electron donors has led to improvements in the activity and selectivity of the Ziegler-Natta catalyst system.     

New penta-ether as the internal donor in the MgCl2-supported Ziegler-Natta catalysts for propylene polymerization

The penta-ether compound was synthesized by the reaction of di(trimethylolpropane) with sodium hydride as the strong base and methyl iodide as the alkyl halide. This compound was characterized by NMR, FTIR, and GC techniques. The MgCl₂-supported titanium catalysts were incorporated with varying amounts of penta-ether compound as the internal donor and also the catalysts without the internal donor were synthesized. The synthesized catalysts and the conventional Ziegler- Natta catalyst were characterized. The titanium contents were determined by spectrophotometry, magnesium by complexometric titration and chloride by argentometric titration. The effects of the new internal donor on propylene polymerization with the prepared MgCl₂-supported Ziegler-Natta catalysts were investigated and then these results were compared to the results obtained using the conventional diisobutyl phthalate-besed-Ziegler-Natta catalyst. The highest crystallinity degree, melting temperature, and isotacticity of polypropylene were obtained using the catalyst with a penta-ether/Mg molar ratio equal to 0.21.     

Performance analysis and development of a refrigeration cycle through various environmentally friendly refrigerants

Journal of Thermal Analysis and Calorimetry - In this study, a refrigeration cycle was simulated with different refrigerants in a petrochemical plant in Iran. Using Aspen HYSYS Software, necessary...     

Development of a New Dynamic Headspace Liquid-Phase Microextraction Method

A new technique, namely dynamic headspace liquid-phase microextraction, has been developed for the extraction of 1,4-dioxane in cosmetic and hygiene samples followed by gas chromatography–flame ionization detection. In this method, the sample is mixed with acetone as a diluent solvent. Then, a few microliters of n-octanol are added into a home-made extraction vessel placed in the headspace of the sample. By heating, the target analyte is transferred to the headspace of the sample and then extracted into n-octanol. Under the optimized conditions, the method showed a good linearity in the range of 3.24–1000 μg kg⁻¹ with a coefficient of determination 0.998. Figures of merit such as enrichment factor of 375, extraction recovery of 94 %, limits of detection and quantification 0.97 and 3.24 μg kg⁻¹, respectively, and relative standard deviation 4.7 % (n = 6, C = 30 μg kg⁻¹) of the proposed method were satisfactory for determination of the target analyte. Finally, the method was successfully applied in determination of 1,4-dioxane in various cosmetic and hygiene samples including shampoo, toothpaste, lotion, washing liquid, and dishwashing liquid.

     

Thin‐Layer Chemical Modulations by a Combined Selective Proton Pump and pH Probe for Direct Alkalinity Detection

We report a general concept based on a selective electrochemical ion pump used for creating concentration perturbations in thin layer samples (～40 μL). As a first example, hydrogen ions are released from a selective polymeric membrane (proton pump) and the resulting pH is assessed potentiometrically with a second membrane placed directly opposite. By applying a constant potential modulation for 30 s, an induced proton concentration of up to 350 mM may be realized. This concept may become an attractive tool for in situ titrations without the need for sampling, because the thin layer eventually re‐equilibrates with the contacting bulk sample. Acid–base titrations of NaOH and Na₂CO₃ are demonstrated. The determination of total alkalinity in a river water sample is carried out, giving levels (23.1 mM ) comparable to that obtained by standard methods (23.6 mM ). The concept may be easily extended to other ions (cations, anions, polyions) and may become attractive for environmental and clinical applications.     

Enhanced fluorescence sensing using microstructured optical fibers: a comparison of forward and backward collection modes

A general model of excitation and fluorescence recapturing by the forward and backward modes of filled microstructured optical fibers (MOFs) is presented. We also present experimental results for both backward and forward fluorescence recapturing within a MOF as a function of fiber length and demonstrate a good qualitative agreement between the numerical model and experimental results. We demonstrate higher efficiency of fluorescence recapturing into backward modes in comparison with that of forward modes.     

Sub-15 femtosecond laser-induced nanostructures emerging on Si(100) surfaces immersed in water: analysis of structural phases

Nanoscale periodic rifts and subwavelength ripples as well as randomly nanoporous surface structures were generated on Si(100) surfaces immersed in water by tightly focused high-repetition rate sub-15 femtosecond sub-nanojoule pulsed Ti:sapphire laser light. Subsequent to laser processing, silicon oxide nanoparticles, which originated from a reaction of ablated silicon with water and aggregated on the exposed areas, were etched off by hydrofluoric acid. The structural phases of the three types of silicon nanostructures were investigated by transmission electron microscopy diffraction images recorded on focused ion beam sections. On nanorift patterns, which were produced at radiant exposure extremely close to the ablation threshold, only the ideal Si-I phase at its original bulk orientation was observed. Electron diffraction micrographs of periodic ripples, which were generated at slightly higher radiant exposure, revealed a compression of Si-I in the vertical direction by 6 %, which is attributed to recoil pressure acting during ablation. However, transitions to the high-pressure phase Si-II, which implies compression in the same direction at pressures in excess of 10 GPa, to the metastable phases Si-III or Si-IV that arise from Si-II on pressure relief or to other high-pressure phases (Si-V–Si-XII) were not observed. The nanoporous surfaces featured Si-I material with grains of resolidified silicon occurring at lattice orientations different from the bulk. Characteristic orientational relationships as well as small-angle grain boundaries reflected the rapid crystal growth on the substrate.