Assignment of acetyl groups to O-2 and/or O-3 of pectic oligogalacturonides using negative electrospray ionization ion trap mass spectrometry

Partially acetylated and methylated oligogalacturonides produced by enzymatic hydrolysis of sugar beet pectin were analysed by negative electrospray ionization ion trap mass spectrometry (ESI-ITMS). The (18)O labelling of the oligomer reducing end allowed the precise assignment of the fragments resulting from glycosidic bond and cross-ring cleavages. The collisional-induced dissociation of the C(i) and Z(j) fragment ions through sequential MS(n) experiments always displayed (0, 2)A-type cross-ring cleavage ions which were related to C(2)H(4)O(2) losses. These (0, 2)A ions appeared to be highly diagnostic ions allowing the precise location of the acetyl groups to the O-2 and/or O-3 of the acetylated galacturonic acid residues.     

Modification of the luminescence properties of an Europium(III) Tris(β-diketonate) Complex by Inclusion in γ-cyclodextrin and 2,3,6-trimethyl-γ-cyclodextrin

A 1:1 inclusion compound between octakis(2,3,6-tri-O-methyl)-γ-cyclodextrin (TRIMEG) and the chelate complex Eu(NTA)₃·2H₂O (NTA=1-(2-naphthoyl)-3,3,3-trifluoroacetonate) was prepared and characterized by powder X-ray diffraction, thermogravimetric analysis and photoluminescence spectroscopy. The results were compared with those obtained for the corresponding native γ-CD adduct. Excitation and emission spectra were measured, and the lifetimes were determined for the Eu³⁺ first excited state (⁵D₀). The results indicate the presence of only one low-symmetry environment for the Eu³⁺ cations in the inclusion compounds. Encapsulation of the Europium complex in the two CDs increases the quantum efficiency of the ligand-to-metal energy transfer pathway, but the efficiency of the Eu³⁺ sensitization was significantly higher with TRIMEG as the host molecule. This may be related with the observation that the two hosts appear to have different influences on the Eu³⁺ coordination environments for the guest molecule.     

Trapping tetramethoxyzincate and -cobaltate(II) between Mo24+ units

Two compounds of a new type, [Mo(2)](CH(3)O)(2)M(CH(3)O)(2)[Mo(2)] where [Mo(2)] is an abbreviation for Mo(2)[(p-MeOC(6)H(4))NCHN(p-MeOC(6)H(4))](3) and M = Zn (1) and Co (2), are reported. Discrete [M(OR)(4)](2-) ions, either as such or in the mu(2),eta(4) role, have not heretofore been described. In these compounds they have distorted tetrahedral structures and bridge two [Mo(2)] groups in much the same way as did SO(4)(2-), MoO(4)(2-), and WO(4)(2-) ions in other recently reported compounds (Cotton, F. A.; Donahue, J. P.; Murillo, C. A. Inorg. Chem. 2001, 40, 2229). The (1)H NMR spectrum of 1 and the visible spectrum and magnetic properties of 2 are consistent with these structures. The M(OCH(3))(4) bridges are moderately effective in coupling the two [Mo(2)] redox centers. Compounds 1 and 2 may also be viewed as having Zn(II) and Co(II) centers tetrahedrally coordinated by the bidentate ligand [Mo(2)[(p-MeOC(6)H(4))NCHN(p-MeOC(6)H(4))](3)(OMe)(2)](-). From that point of view they may be compared with Zn(DPM)(2) and Co(DPM)(2) (3), where DPM is the anion of dipivaloylmethane. For purposes of comparison, 3 has been fully characterized structurally, spectroscopically, and magnetically. Close analogies between 2 and 3 are shown to exist.     

Analysis of nickel-niobium alloys by inductively coupled plasma optical emission spectrometry

Inductively coupled plasma optical emission spectrometry (ICP-OES) was applied to the analysis of major and minor elements of Ni-Nb alloys obtained by aluminothermic reduction process. Digestion of samples was made using a mixture of HF+HNO₃. Minor and trace elements were determined without matrix separation. The precision for all constituents was <3%. Recoveries for the analyte-spiked samples were 95%.     

Non-trivial behavior of palladium(II) acetate

Reaction of activated palladium metal with a HNO3/acetic acid mixture produces both orange Pd3(OAc)6, 1, and purple Pd3(OAc)5(NO2), 2. Compound has a trinuclear structure derived from that of the well-known triangular complex 1 in which one acetate group has been replaced by a nitrite group which is bonded to one palladium atom by the nitrogen atom and to another Pd atom using one of the oxygen atoms. Highly pure 1 can be made by continuous removal of the nitric oxides from the reaction mixture using a flow of N2. 1H NMR spectra of solutions of 1 in CDCl3 and C6D6 show several signals of various intensities when a small amount of water is present in the deuterated solvents but only one signal when the solvents are thoroughly dried. These results are consistent with the occurrence of one or more hydrolysis processes when the solvents contain water and suggest that hypotheses about various [Pd(OAc)2]n aggregates that have previously been brought forward in the literature to explain the complexity of the spectrum of 1 are unnecessary, especially for nonpolar solvents. Compound 2 does not hydrolyze, and in wet or dried solvents shows a 1H NMR spectrum that consists of five equal-intensity signals due to the five nonequivalent acetate groups.     

Exact mass measurement of product ions for the structural confirmation and identification of unknown compounds using a quadrupole time-of-flight spectrometer: a simplified approach using combined tandem mass spectrometric functions

This article describes a simple method to perform lock mass corrected accurate mass measurements in tandem mass spectrometry (MS/MS) with a quadrupole time-of-flight (Q-TOF) mass spectrometer. The experimental approach consists of using the protonated molecule of a known compound, which is measured in a MS/MS function using low collision energy (no fragmentation), as mass calibrator. The unknown compound is acquired in MS/MS mode albeit using high collision energy. After the acquisition, the two MS/MS spectra of unknown and mass calibrator are combined, and the fragments of the unknown are lock mass corrected by using the protonated molecule of the mass calibrator. To prove this concept, 10 compounds were analyzed using this approach, the fragments interpreted and, where possible, related to structural data available in the literature. All the unequivocally assigned fragments were accurately mass measured with mass errors within appropriate limits, i.e. for m/z values <200 with a mass tolerance of 3 mDa while for m/z > 200 the mass tolerance is expressed as 10 ppm.     

Reactions of Sulphate Radicals with Substituted Pyridines: A Structure–Reactivity Correlation Analysis

The kinetics of the oxidation of pyridine, 3‐chloropyridine, 3‐cyanopyridine, 3‐methoxypyridine and 3‐methylpyridine mediated by SO₄ ^{< M ‐>} radicals are studied by flash photolysis of peroxodisulphate, S₂O₈^2?, at pH 2.5 and 9. The absolute rate constants for the reactions of both, the basic and acid forms of the pyridines, are determined and discussed in terms of the Hammett correlation. The monosubstituted pyridines react about 10 times faster with sulphate radicals than their protonated forms, the pyridine ions. The organic intermediates are identified as the corresponding hydroxypyridine radical adducts and their absorption spectra compared with those estimated employing the time‐dependent density functional theory with explicit account for bulk solvent effects. A reaction mechanism which accounts for the observed intermediates and the pyridinols formed as products is proposed.     

Cis- and trans-3-hexene: infrared spectrum in liquid argon solution, ab initio calculations of equilibrium geometry, normal coordinate analysis, and vibrational assignments

The infrared spectra of cis-3-hexene and trans-3-hexene dissolved in liquid argon have been obtained at temperatures from 93 to 120 K. The absorptions were observed with a low-temperature cell and a Fourier transform infrared spectrophotometer. Ab initio molecular orbital calculations were performed to obtain the equilibrium geometry, vibrational frequencies, force fields, and infrared intensities. The calculations were done at the Hartree-Fock level using 6-31G basis set. The Cartesian force fields from ab initio calculations have been converted to the force field in symmetry coordinates. The scale factors of ab initio calculated force fields were determined. Normal coordinate calculations were performed using a scaled quantum mechanical (SQM) force field. Vibrational normal modes calculated for the lowest energy rotamers of cis- and trans-3-hexene have been assigned to infrared absorption bands observed in liquid argon solution. The assignments were based on calculated frequencies and potential energy distributions. The equilibrium geometries of the two lowest energy rotamers (symmetry C₂ and C_s) of cis-3-hexene and of the three lowest energy rotamers (symmetry C_i, C₂, and C₁) of trans-3-hexene were calculated. Variable temperature studies of the infrared spectrum of cis- and trans-3-hexenes dissolved in liquid argon were done to obtain the ΔH of conversion between the rotamers C₂ and C_s of cis-3-hexene and between the rotamers C_i, C₂, and C₁ of trans-3-hexene.     

Nuclear magnetic resonance studies of sulfur inversion in bis(cyclopentadienyl)-molybdenum and -tungsten complexes with dithioethers

The metallocene thioether derivatives [Cp₂M(MeSCH₂CH₂SMe)][PF₆]₂ (1, M = MO; 2, M = W), [Cp₂Mo(SCH₂CH₂SMe)][PF₆] (3) and [Cp₂M(SCH₂CH₂S)] (4, M = Mo; 5, M = W) exhibit temperature-dependent fluxional behavior in solution, owing to the pyramidal sulfur inversion process. The activation energies for this process were determined from proton band-shape analysis in the cases of 1 (54.9 ± 2 kJ mol⁻¹), 2 (51.2 ± 4.6 kJ mol⁻¹) and 3 (30.0 ± 3.1 kJ mol⁻¹). Extended Hückel calculations on related model complexes suggest that local inversion at the sulfur atoms, rather that an inversion of the complete S---C---C---S chain, is responsible for the observed fluxional behaviour.     

Flow injection determination of bismuth in urine by successive retention of Bi(III) and tetrahydroborate(III) on an anion-exchange resin and hydride generation atomic absorption spectrometry

Bismuth as BiCl₄⁻ and BH₄⁻ ware successively retained in a column (150 mm × 4 mm, length × i.d.) packed with Amberlite IRA-410 (strong anion-exchange resin). This was followed by passage of an injected slug of hydrochloric acid resulting in bismuthine generation (BiH₃). BiH₃ was stripped from the eluent solution by the addition of a nitrogen flow and the bulk phases were separated in a gas–liquid separator. Finally, bismutine was atomized in a quartz tube for the subsequent detection of bismuth by atomic absorption spectrometry. Different halide complexes of bismuth (namely, BiBr₄⁻, BiI₄⁻ and BiCl₄⁻) were tested for its pre-concentration, being the chloride complexes which produced the best results. Therefore, a concentration of 0.3 mol l⁻¹ of HCl was added to the samples and calibration solutions. A linear response was obtained between the detection limit (3σ) of 0.225 and 80 μg l⁻¹. The R.S.D.% (n = 10) for a solution containing 50 μg l⁻¹ of Bi was 0.85%. The tolerance of the system to interferences was evaluated by investigating the effect of the following ions: Cu²⁺, Co²⁺, Ni²⁺, Fe³⁺, Cd²⁺, Pb²⁺, Hg²⁺, Zn²⁺, and Mg²⁺. The most severe depression was caused by Hg²⁺, which at 60 mg l⁻¹ caused a 5% depression on the signal. For the other cations, concentrations between 1000 and 10,000 mg l⁻¹ could be tolerated. The system was applied to the determination of Bi in urine of patients under therapy with bismuth subcitrate. The recovery of spikes of 5 and 50 μg l⁻¹ of Bi added to the samples prior to digestion with HNO₃ and H₂O₂ was in satisfactory ranges from 95.0 to 101.0%. The concentrations of bismuth found in six selected samples using this procedure were in good agreement with those obtained by an alternative technique (ETAAS). Finally, the concentration of Bi determined in urine before and after 3 days of treatment were 1.94 ± 1.26 and 9.02 ± 5.82 μg l⁻¹, respectively.