Rapid and easy quantification of elemental sulphur in aqueous samples from biological reactors: the turbidimetric method revisited

Recent developments in wastewater treatment have led to a renewed interest to obtain elemental sulphur (S°) as a by-product from bioreactors. However, practical studies are limited by the gap of adequate analytical techniques for its determination. This paper provides a statistical study and matrix effect evaluation of an adapted spectrophotometric method for routine S° analyses in aqueous samples, based on a methodology previously described by Hart (1961). Four complex matrices were tested: domestic sewage and effluent samples from three different bioreactors. Tested performance criteria included linearity, matrix effect, limit of detection and quantification and S° recovery. Results were linear (R² = 0.99994) in the studied range (5 to 100 mg S° L^?1) and no matrix effect was observed. The accuracy was based on recovery values that varied from 100% to 106%. The colloidal S° separation and extraction protocol was also considered suitable for aqueous samples, reaching more than 99.0% of S° recovery.     

Double-imprinted polymer based on cross-linked poly(vinylimidazole–trimethylolpropane trimethacrylate) in solid phase extraction for determination of lead from wastewater samples by UV–vis spectrophotometry

The monitoring of the heavy metal pollution in wastewater is increasingly becoming a crucial global issue since they tend to accumulate in food chains and can cause many biological abnormalities. In this work, it was developed a novel lead ion-imprinted polymer (IIP) using sodium dodecyl sulphate (SDS) as a second template to be used as adsorbent in solid phase extraction (SPE) for determination of lead from wastewater samples by UV–vis spectrophotometry. The polymer called IIP–SDS was synthesised by a double-imprinting process with lead (template) and SDS (template). IIP–SDS was characterised by infrared spectroscopy Fourier transform infrared spectroscopy, thermogravimetric analysis and scanning electron microscopy. IIP–SDS showed good recovery for lead (around 82.0%), while the IIP (only lead as template) was 72.2% and non-IIP was 44.9%. Thus, the double-imprinting process for the preconcentration of Pb²⁺ proved to be a more adequate methodology than IIP with a single template. The optimised parameters of sample preparation were washing solvent (2.0 mL of tetrahydrofuran), type and volume of eluent (5 mL of 1 mol L^?1 hydrochloric acid), sample amount (30 mL of water spiked with 10.0 µg mL^?1), amount of IIP–SDS (400 mg) and sample pH (pH = 4.5). Linearity ranged from 10 to 125 µg L^?1 with r > 0.992. The limit of detection and quantification were 6.3 and 10 µg L^?1, respectively. The precision (relative standard deviation, %) and accuracy (relative error, %) were lower than 15%. Finally, IIP–SDS may be an alternative and effective adsorbent for SPE procedures in monitoring of wastewater samples.     

Novel 4-azaandrostenes as prostate cancer cell growth inhibitors: Synthesis,antiproliferative effects,and molecular docking studies

In this study, synthesis, structural characterization, molecular docking studies, and antiproliferative effects in four different cell lines of several novel 16-arylidene-4-azaandrost-5-ene compounds are reported. These compounds were prepared by oxidative cleavage of the enone system of androstenedione followed by an azacyclization reaction and an aldol condensation with various aldehydes at C16. In the androgen-dependent LNCaP cells, the most relevant antiproliferative effects were observed with the 16-phenyl, 16-p-tolyl, and 16-p-nitrophenyl derivatives. Compound 16E-[(4-methylphenyl)methylidene]-4-azaandrost-5-ene-3,17-dione was the most potent in these cells (IC₅₀ = 28.28 μM), having lower antiproliferative effects in the androgen-independent PC-3 cells (IC₅₀ = 45.31 μM). In addition, an interesting selectivity toward cancer cell lines was found for all compounds because a generally low cytotoxicity was detected in healthy human fibroblasts. Furthermore, the 16-p-tolylazaandrostene steroid induced a reduction of viability in LNCaP cells similar to that observed with finasteride, a clinically used 5α-reductase inhibitor. Moreover, molecular docking studies predicted that these 4-azaandrostene derivatives can interact with 5β-reductase, which has a high level of similarity to 5α-reductase enzyme, and with other common targets of steroidal drugs, particularly the enzyme 17α-hydroxylase/17,20-lyase.     

Magnetic properties of a polyfluorene derivative containing complexed neodymium ions

Poly[9,9′‐dihexylfluorene‐2,7‐diyl)‐6,6″‐(2,2′:6′,2″‐terpyridine)] (LaPPS75) and its complexes with neodymium were synthesized and characterized. Magnetic measurements showed that the noncomplexed polymer presented a ferromagnetic contribution due to the formation of π stacking, and that in absence of those, the ferromagnetic behavior is suppressed. The pristine polymer, the complexed one and a low‐molecular‐weight model compound with the same structure of the complexed site in the parent polymer were studied. The observed behavior found is presented and discussed, the most important finding was that when a conjugated chain is used as a host for the metallic ion, an amplification of four times for the magnetization is achieved, using the same metallic content for complexed polymer and model compound for comparison. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 304–311     

Exposure risk assessment of uranium intake of the milk products from the region of Pernambuco,Brazil

Journal of Radioanalytical and Nuclear Chemistry - Haloperidol (HP) is a dopamine blocking agent. HP was radiolabeled with 125I using direct electrophilic substitution. Different HP formulations...     

Syntheses and characterization of Cu,Ni and Zn binding capability of histidinehydroxamic acid derivatives

Two histidinehydroxamic acid derivatives (N-methyl-histidinehydroxamic acid, N-Me-Hisha and Z-histidinehydroxamic acid, Z-Hisha) have been synthesized and their complexation with Cu²⁺-, Ni²⁺- and Zn²⁺-ions has been studied by using pH-potentiometric, UV–Vis, CD, ¹H NMR, EPR and ESI-MS methods. Both of the two new derivatives contain one donor atom less compared to the histidinehydroxamic acid (Hisha). In the case of N-Me-Hisha the hydroxamate-N as donor is eliminated, while the coordination of the amino-N of Z-Hisha is not possible at all.     

Prediction of aqueous solubilities of solid carboxylic acids with COSMO-RS

The methodology for the prediction of aqueous solubilities of solid organic compounds, and their temperature dependence, based on the Conductor-like Screening Model for Real Solvents (COSMO-RS/COSMOtherm) procedure, is presented and evaluated. The predictive capability of the quantum chemistry based program and the applied methodology was tested on the most common solid carboxylic acids. From the temperature dependence of the solubilities, the mean apparent enthalpies of solution were derived. The results obtained for a set of 27 carboxylic acids, consisting of aromatic carboxylic acids, dicarboxylic acids, as well as hydroxycarboxylic acids, are in good agreement with the experimental solubility data and their dependence with the temperature. The mean apparent enthalpies of solution, although of the same order of magnitude of the experimentally values, seem to be systematically underestimated.     

Vapor–liquid equilibrium calculations for refrigerant mixtures with the Mattedi–Tavares–Castier EOS

The present study uses the Mattedi–Tavares–Castier EOS to investigate VLE predictions for refrigerant binary mixtures. The refrigerant molecules are treated either by the associated-group or the uniform-molecular model. In the associated-group model, the refrigerant molecule is split into three groups: an electron-donor (α), an electron-acceptor (β), and a dispersion group (D). In the uniform-molecular model, the refrigerant molecule is represented as a single group. Results obtained with the MTC EOS are in agreement with experimental data reported in the literature. The EOS that treats refrigerant molecules with groups that can associate gives worse results than the uniform-molecular model.     

Liquid–liquid equilibrium in ternary ionic liquid systems by UNIFAC: New volume,surface area and interaction parameters. Part I

Ternary liquid–liquid equilibria (LLE) data in systems involving ionic liquids has been investigated by several years, mainly due to the innovative role of ionic liquids as extraction solvents. The thermodynamic modeling of these systems has been performed almost invariably with the well-known NRTL model. In recent years, the UNIQUAC model has also been used, with structural parameters for ionic liquids determined either by empirical correlations or, more recently, through quantum mechanics calculations. In this work, the structural group volume and area parameters for the group-contribution UNIFAC method have been calculated for six ionic liquids following the quantum mechanics approach. The Density Functional Theory (DFT) was used to optimize the molecular geometry and the Polarizable Continuum Method (PCM) was used to calculate the area and volume. The obtained parameters were used to correlate LLE data for twenty-four ternary systems, totalizing 169 tie-lines. New interaction parameters were also estimated between the solvent and ionic liquid functional groups. The results are very satisfactory, with root mean square deviations between experimental and calculated compositions about 1.6%.     

Micro energy dispersive X-ray fluorescence analysis of polychrome lead-glazed Portuguese faiences

Several glazed ceramic pieces, originally produced in Coimbra (Portugal), were submitted to elemental analysis, having as premise the pigment manufacture production recognition. Although having been produced in Coimbra, their location changed as time passed due to historical reasons. A recent exhibition in Coimbra brought together a great number of these pieces and in situ micro Energy Dispersive X-ray Fluorescence (µ-EDXRF) analyses were performed in order to achieve some chemical and physical data on the manufacture of faiences in Coimbra.