Azinoiminophosphorane mediated synthesis of 5H, 7H‐1,2,4‐triazolo[1,5‐c][1,3]benzoxazepin‐7‐ones and 6H,8H‐1,2,4‐triazolo‐[1,5‐c][1,3]oxazepin‐6‐ones

The aza‐Wittig reactions of benzophenone‐, acetophenone‐ and benzaldehyde l‐[(triphenylphosphoranyl‐idene)amino]ethylidenehydrazones (4) with phthalic anhydride, 2,3‐dimethylmaleic anhydride and 7‐oxabi‐cyclo[2,2,l]hept‐5‐ene‐2,3‐dicarboxylic anhydride ( 5a ) provide a new route to 5H,7H‐1,2,4‐triazolo[1,5‐c]‐[1,3]benzoxazepin‐7‐ones 8a‐c or 6H,8H‐1,2,4‐triazolo[1,5‐c][1,3]oxazepin‐6‐ones 8d‐h via the thermal reaction of the expected azinoimine lactones 6 .     

A concept for bifocal contact‐ or intraocular lenses: liquid single crystal hydrogels (“LSCH”)

The synthesis of liquid single crystal hydrogels (“LSCH”) in suitable molds offers an innovative concept to realize bifocal contact‐ or intraocular‐lenses. LSCH combine the properties required for applications as bifocal ophthalmic lenses: the soft and water‐containing hydrogel enables oxygen permeation and exhibits high birefringence due to the liquid crystalline phase structure built up by rigid rod‐like amphiphiles. Via a photo‐initiated crosslinking reaction of aqueous solutions of monomeric lyotropic liquid crystalline amphiphiles in the macroscopically ordered liquid crystalline state, we obtain optically uniaxially ordered and transparent LSCH. The orientation process and the phase structure of the anisotropic hydrogel is analyzed by deuterium NMR‐spectroscopy. Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis and properties of organosoluble poly(amide imide imide)s based on tetraimide dicarboxylic acid condensed from 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride, 4,4′‐oxydianiline,and trimellitic anhydride and various aromatic diamines

A novel tetraimide dicarboxylic acid was synthesized with the ring‐opening addition of 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride, 4,4′‐oxydianiline, and trimellitic anhydride in a 1/2/2 molar ratio in N‐methyl‐2‐pyrrolidone followed by azeotropic condensation to tetraimide dicarboxylic acid. A series of poly(amide imide imide)s (PAIIs) with inherent viscosities of 0.8–1.1 dL/g were prepared from tetraimide dicarboxylic acid with various aromatic diamines by direct polycondensation. Most of the PAIIs were readily soluble in a variety of amide polar solvents and even in less polar m‐cresol and pyridine. Solvent‐cast films had tensile strengths ranging from 99 to 106 MPa, elongations at break ranging from 8 to 13%, and initial moduli ranging from 2.0 to 2.3 GPa. The glass‐transition temperatures of these PAIIs were recorded at 244–276 °C. They had 10% weight losses at temperatures above 520 °C in air or nitrogen atmospheres. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1092–1102, 2002     

Synthesis and properties of novel polyurethanes containing 3,4‐dioxybenzylidenecyanoacetate group as a nonlinear optical chromophore

Methyl 3,4‐di‐(2′‐hydroxyethoxy)benzylidenecyanoacetate ( 3 ) was prepared by hydrolysis of methyl 3,4‐di‐(2′‐vinyloxyethoxy)benzylidenecyanoacetate ( 2 ). Diol 3 was condensed with 2,4‐toluenediisocyanate, 3,3′‐dimethoxy‐4,4′‐biphenylenediisocyanate, and 1,6‐hexamethylenediisocyanate to yield polyurethanes 4 – 6 containing the nonlinear optical chromophore 3,4‐dioxybenzylidenecyanoacetate. The resulting polyurethanes 4 – 6 were soluble in common organic solvents such as acetone and dimethylformamide. Polymers 4 – 6 indicated thermal stability up to 300 °C in thermogravimetric thermograms with glass‐transition temperature values obtained from differential scanning calorimetric thermograms in the range of 78–102 °C. The second‐harmonic generation coefficients (d₃₃) of the poled polymer films were around 6.9 × 10^?9 esu. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1742–1748, 2002     

Iron‐catalyzed living radical polymerization of acrylates: Iodide‐based initiating systems and block and random copolymerizations

A half‐metallocene iron iodide complex [Fe(Cp)I(CO)₂] induced living radical polymerization of methyl acrylate (MA) in conjunction with an iodide initiator [(CH₃)₂C(CO₂Et)I, 1 ] and Al(Oi‐Pr)₃ to give polymers of controlled molecular weights and narrow molecular weight distributions (MWDs) (M_w/M_n < 1.2). With the use of chloride and bromide initiators, the MWDs were broader, whereas the molecular weights were similarly controlled. Other acrylates such as n‐butyl acrylate (nBA) and tert‐butyl acrylate (tBA) can be polymerized with 1 /Fe(Cp)I(CO)₂ in the presence of Ti(Oi‐Pr)₄ and Al(Oi‐Pr)₃, respectively, to give living polymers. The 1 /Fe(Cp)I(CO)₂ initiating system is applicable for the synthesis of block and random copolymers of acrylates (MA, nBA, and tBA) and styrene of controlled molecular weights and narrow MWDs (M_w/M_n = 1.2–1.3). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2033–2043, 2002     

Use of α‐diketones as visible photoinitiators for the photocrosslinking of waterborne latex paints

The efficiency of several α‐diketones as visible light photoinitiators for the crosslinking of waterborne latex dispersions in the presence of acrylic monomers was evaluated. Among the eight α‐diketones studied, camphorquinone allows the fastest curing speed, and the curing of the acrylic waterborne coating is not affected by the presence of oxygen. The properties of the sunlight‐cured volatile organic compound (VOC)‐free pigmented paints prepared from the waterborne latex are as good or better than the equivalent conventional paint containing VOCs. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3171–3181, 2002     

Synthesis and characterization of the novel l‐(substituted phenoxy/phenyl)‐2‐phospholene and phospholane 1‐oxide derivatives

The synthesis of the novel 1‐(substituted phenoxy/phenyl)‐2‐phospholene and phospholane 1‐oxide derivatives, which are analogs of sugars having a phosphorus atom in place of the ring oxygen of normal sugars, is described. All of the synthesized derivatives are structurally characterized by multi nuclear NMR, mass, and IR spectral data, elemental and X‐ray crystallographic analyses.     

Non‐Alkaloidal Constituents from the Stem of Ficus Septica

Seven triterpenes, two lignans, and twelve other known compounds were isolated from the non‐alkaloidal fractions of the stem of Ficus septica Among these triterpenoids, a rare triterpene skeleton derivative, 13,27‐cycloursan‐3β‐ylacetate was isolated from natural sources for the first time. All the structures of these compounds were elucidated by spectroscopic methods.     

Determination of Naphthalenesulfonate Isomers in Industrial Effluents and River Water by Solid‐Phase Extraction and Capillary Zone Electrophoresis

This work presents a method to separate polar naphthalenesulfonate (NS) isomers by capillary zone electrophoresis (CZE) with ultraviolet detection in industrial effluents and river water samples. The method involves extraction of samples by a polystyrene‐divinylbenzene copolymer (PS‐DVB) solid‐phase extraction (SPE) cartridge. The most effective CZE separation conditions were obtained in 20 mM borate buffer with 30% acetonitrile at pH 9.0 and 30 °C. The method proposed herein provides a high precision and sensitivity for NS isomers, to quantitation at ≤ 1.0 μg/L in 200 mL of the water samples. Recovery of the NS isomers in spiked water samples ranged from 73% to 87% while RSD ranging from 5.6 to 9.7%. The analysis of industrial effluents and river water samples was performed and naphthalene‐2‐sulfonate was found as a major pollutant. The difficulties in quantitating and identifying analytes in complex environmental samples can be resolved by using an internal standard response factor to calculate concentrations and relative migration times for peak confirmation.     

Matrix Effect of Alkali and Alkaline Earth Metal Halides on Fluorescence Quantum Yield of Indium in Laser‐Induced Fluorescence Flame Spectrometry

As interfered with by alkali and alkaline earth metal halides added as the matrix in an acetylene/air flame, the fluorescence quantum yield of In as the analyte in a laser‐induced fluorescence (LIF) flame spectrometry has been thoroughly characterized. The fluorescence quantum yield is determined by a ratio of F to A, where F is the measured fluorescence of In and A is the difference between the absorption signals recorded for the analyte and the blank solutions. The normalized fluorescence signal is treated to prevent deviations due to variations of the atomization efficiency under the conditions with and without the matrix added. The fluorescence quantum yield is measured to be almost independent of the matrix concentration up to 500 ppm (μg/mL) studied, under conditions of either optical unsaturation or saturation. By considering a quenching effect induced by electron‐atom collisions, the calculated fluorescence quantum yields are consistent with our observations.