Synthesis and N.m.r. studies of bis-trisubstituted phosphine platinum(o) and palladium(o) complexes with push-pull olefins

Summary Platinum(0) and palladium(0) complexes of the type: P₂M(R₁R₂C=CR₃R₄) (P=trisubstituted phosphine; R₁, R₂, R₃ and R₄ are different groups having electron acceptor or electron donor properties; M=Pt or Pd) with so called pushpull olefins, have been prepared and characterized. In some cases unusual patterns in the n.m.r. spectra of olefinic protons were observed. The spectra were analyzed by computer simulation and general rules for ABMX patterns for this type of complexes are given.     

Formulation of Aluminum Chloride Phthalocyanine in Pluronic™ P‐123 and F‐127 Block Copolymer Micelles: Photophysical properties and Photodynamic Inactivation of Microorganisms

Aluminum Chloride Phthalocyanine (AlPcCl) can be used as a photosensitizer (PS) for Photodynamic Inactivation of Microorganisms (PDI). The AlPcCl showed favorable characteristics for PDI due to high quantum yield of singlet oxygen (Φ_Δ) and photostability. Physicochemical properties and photodynamic inactivation of AlPcCl incorporated in polymeric micelles of tri‐block copolymer (P‐123 and F‐127) against microorganisms Staphylococcus aureus, Escherichia coli and Candida albicans were investigated in this work. Previously, it was observed that the AlPcCl undergoes self‐aggregation in F‐127, while in P‐123 the PS is in a monomeric form suitable for PDI. Due to the self‐aggregation of AlPcCl in F‐127, this formulation did not show any effect on these microorganisms. On the other hand, AlPcCl formulated in P‐123 was effective against S. aureus and C. albicans and the death of microorganisms was dependent on the PS concentration and illumination time. Additionally, it was found that the values of PS concentration and illumination time to eradicate 90% of the initial population of microorganisms (IC₉₀ and D₉₀, respectively) were small for the AlPcCl in P‐123, showing the effectiveness of this formulation for PDI.     

An SFG/DFG investigation of CN− adsorption at an Au electrode in 1-butyl-1-methyl-pyrrolidinium bis(trifluoromethylsulfonyl) amide ionic liquid

In this paper we report an SFG/DFG investigation of the adsorption of CN^? – used as a probe molecule to study the electrochemical double-layer structure – at a polycrystalline Au electrode in 1-butyl-1-methyl-pyrrolidinium bis(trifluoromethylsulfonyl) amide ([BMP][TFSA]) room-temperature ionic liquid (RTIL). The adsorption of CN^? yielded single SFG and DFG bands in the range from ca. 2125 to 2135 cm^?1, exhibiting a Stark tuning of ca. 3 cm^?1 V^?1. Vibrational resonances – corresponding to modes of the RTIL coadsorbed with CN^?, were found in the range from ca. 1200 to 1500 cm^?1. The study of the double-layer structure was complemented by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) measurements, from which the differential double-layer capacity (C_DL) was estimated.     

A synchrotron FTIR microspectroscopy investigation of fungal hyphae grown under optimal and stressed conditions

Synchrotron FTIR can provide high spatial resolution (<10 μm pixel size) in situ biochemical analyses of intact biotissues, an area of increasing importance in the post-genomic era, as gene functions and gene networks are coming under direct scrutiny. With this technique, we can simultaneously assess multiple aspects of cell biochemistry and cytoplasmic composition. In this paper, we report the first results of our synchrotron FTIR examination of hyphae of three important fungal model systems, each with sequenced genomes and a wealth of research: Aspergillus, Neurospora, and Rhizopus. We have analyzed the FTIR maps of Aspergillus nidulans cells containing the hypA1 allele, a well-characterized single-gene temperature-sensitive morphogenetic mutation. The hypA1 cells resemble wildtype at 28 °C but have growth defects at 42 °C. We have also investigated Neurospora and Rhizopus cultures grown in media with optimal or elevated pH. Significant differences between the spectra of the three fungi are likely related to differences in composition and structure. In addition, high spatial resolution synchrotron FTIR spectroscopy provides an outstanding method for monitoring subtle subcellular changes that accompany environmental stress. Figure Photomicrographs and FTIR spectra acquired along Rhizopus hyphae grown at pH 6.5 (a) and pH 8.5 (b). Scale bars 50 μm     

3D [Ag-Mg] polyanionic frameworks in the La4Ag10Mg3 and La4Ag10.3Mg12 new ternary compounds

The crystal structures of two new ternary phases, La₄Ag₁₀Mg₃ and La₄Ag_10.3Mg₁₂, were refined from X-ray single crystal diffraction data. La₄Ag₁₀Mg₃ crystallizes in the Ca₄Au₁₀In₃ structure type, an ordered variant of the binary Zr₇Ni₁₀ compound: orthorhombic, Cmce, oS68, a=14.173(5), b=10.266(3), c=10.354(3) Å, Z=4, wR₂=0.0826, 676 F² values, 50 variables. La₄Ag_10.3Mg₁₂ represents a new structure type: orthorhombic, Cmmm, oS116-10.32, a=9.6130(3), b=24.9663(8), c=9.6333(2) Å, Z=4, wR₂=0.0403, 1185 F² values, 101 variables. The structural analysis of both compounds, highlighting a significant contraction of the Ag-Mg distances, suggests the existence of three-dimensional [Ag-Mg] networks hosting La atoms. LMTO calculations applied to La₄Ag₁₀Mg₃ indicate that the strongest bonds occur for Ag-Ag and Ag-Mg interactions, and confirm the presence of a 3D_∞[Ag₁₀Mg₃]^δ− polyanionic framework balanced by positively charged La atoms.     

A novel application of immobilization on membranes for the separation and spectrofluorimetric quantification of amiloride and furosemide in pharmaceutical samples

A new, simple and highly sensitive method for spectrofluorimetric determination of amiloride (AMI) and furosemide (FUR) in pharmaceuticals is presented. The proposed method is based on the separation of AMI from FUR by solid-phase extraction using a nylon membrane, followed by spectrofluorimetric determination of both drugs, on the solid surface and the filtered aqueous solution, respectively. AMI shows low native fluorescence, but its separation-preconcentration by immobilization (solid-phase extraction) on nylon membrane surface provides a considerable enhancement in fluorescence intensity. The fluorescence determination is carried out at λ_ex = 237, λ_em = 415 nm for FUR; and λ_ex = 365, λ_em = 406 nm for AMI. The calibration graphs are linear in the range 3.20 × 10⁻⁴ to 0.8 μg mL⁻¹and 1.33 × 10⁻³ to 4.0 μg mL⁻¹, for AMI and FUR, respectively, with a detection limit of 9.62 × 10⁻⁵ and 4.01 × 10⁻⁴ μg mL⁻¹ (S/N = 3). The commonly found excipients in commercial pharmaceutical formulations do not interfere. The developed method is successfully applied to the determination of both drugs in pharmaceutical formulations.     

Thermal stability of nanocrystalline ε-Fe2O3

Thermal behavior of highly crystalline ε-Fe₂O₃ nanoparticles of different apparent crystallite sizes was characterized using thermogravimetry, differential thermal analysis, and analysis of evolved gas by mass spectrometry. Phase composition of the samples was monitored ex situ by X-ray powder diffraction. The results show that the thermal stability of this metastable iron oxide polymorph decreases with increasing particle size. For the particle diameter of 19(2) nm, the transformation temperature was equal to 794(5) °C, while for 28(2) nm only 755(10) °C. Surface of the nanoparticles contained adsorbed water and carbon dioxide. Elimination of these species proceeds in two steps. Water is removed at temperatures below 200 °C and CO₂ in the temperature range between 200 and 450 °C.     

Development and validation of an HPLC-MS/MS method to quantify clopidogrel acyl glucuronide, clopidogrel acid metabolite, and clopidogrel in plasma samples avoiding analyte back-conversion

A new sensitive and fast quantitative analytical method for the simultaneous determination of clopidogrel, its main metabolite clopidogrel carboxylic acid, and the newly described acyl glucuronide metabolite, in human plasma samples, is presented. The analytical procedures (plasma storage, handling, and extract storage in the autosampler) were optimized in order to avoid back-conversion; a known drawback in measurements of clopidogrel. Clopidogrel acyl glucuronide was confirmed as a major source of back-conversion to the parent drug in the presence of methanol, and thorough stability experiments were carried out to find the most appropriate conditions for an accurate analysis of clopidogrel and the two metabolites. The method was validated by assessing selectivity, sensitivity, linearity, accuracy, and precision for all three analytes, in accordance to Food and Drug Administration guidelines. Spiked quality controls in plasma as well as incurred samples were used to verify back-conversion in the selected conditions, with results meeting European Medicines Agency acceptance criteria (concentrations within 80–120% of the first reading). The method was then applied to a pharmacokinetic study, and for the first time, a pharmacokinetic curve of clopidogrel acyl glucuronide in human plasma is presented. The concentrations ranged up to 1,048.684 ng/mL, with a mean of 470.268 ng/mL, while clopidogrel had a mean C _max of 1.348 ng/mL; these orders of magnitude show how much the back-conversion of this metabolite may influence clopidogrel quantification if it is not properly controlled.     

A peptidomic approach for monitoring and characterising peptide cyanotoxins produced in Italian lakes by matrix-assisted laser desorption/ionisation and quadrupole time-of-flight mass spectrometry

In recent years, the occurrence of cyanobacterial blooms in eutrophic freshwaters has been described all over the world, including most European countries. Blooms of cyanobacteria may produce mixtures of toxic secondary metabolites, called cyanotoxins. Among these, the most studied are microcystins, a group of cyclic heptapeptides, because of their potent hepatotoxicity and activity as tumour promoters. Other peptide cyanotoxins have been described whose structure and toxicity have not been thoroughly studied. Herein we present a peptidomic approach aimed to characterise and quantify the peptide cyanotoxins produced in two Italian lakes, Averno and Albano. The procedure was based on matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry mass spectrometry (MALDI-TOF-MS) analysis for rapid detection and profiling of the peptide mixture complexity, combined with liquid chromatography/electrospray ionisation quadrupole time-of- flight tandem mass spectrometry (LC/ESI-Q-TOF-MS/MS) which provided unambiguous structural identification of the main compounds, as well as accurate quantitative analysis of microcystins. In the case of Lake Averno, a novel variant of microcystin-RR and two novel anabaenopeptin variants (Anabaenopeptins B(1) and Anabaenopeptin F(1)), presenting homoarginine in place of the commonly found arginine, were detected and characterised. In Lake Albano, the peculiar peptide patterns in different years were compared, as an example of the potentiality of the peptidomic approach for fast screening analysis, prior to fine structural analysis and determination of cyanotoxins, which included six novel aeruginosin variants. This approach allows for wide range monitoring of cyanobacteria blooms, and to collect data for evaluating possible health risks to consumers, through the panel of the compounds produced along different years.     

Thermal analysis of corrosion products formed on carbon steel in ammonium chloride solution

The influence of different ions NO₃ ^? and SO₄ ^2? on the carbon steel corrosion in ammonium chloride was investigated using mass loss measurements and potentiodynamic polarization. Corrosion products were analyzed using X-ray photoelectron spectroscopy (XPS) and simultaneous thermal and differential scanning calorimetry (TG/DSC). XPS analysis shows that the main product of corrosion is a non-stoichiometric Fe³⁺ oxyhydroxide, consisting of a mixture of FeO(OH) and FeO(OH) containing inclusions of these anions, species such as Fe³⁺O(OH,Cl^?); Fe³⁺O(OH,SO₄ ^2?); and Fe³⁺O(OH,NO₃ ^?). TG/DSC confirms the decomposition of the rusty products formed by chemical corrosion, compounds like Fe³⁺ oxyhydroxides, with β-FeOOH as the major phase, crystal structure of which may contain Cl^?, NO₃ ^?, and SO₄ ^2?—e.g., akaganeite [Fe³⁺O(OH,A)].