SALS,WAXS and mechanical properties of heat‐treated thermotropic polymers

The influence of heat treatment on the texture, microstructure and tensile mechanical properties of extruded thin films of a series of high‐performance thermotropic liquid crystal polymers (LCPs) was investigated. LCPs based on random units of hydroxybenzoic acid (B), hydroxynaphthoic acid (N), terephthalic acid (TA) and biphenol (BP) were kindly supplied by the former Hoechst Celanese Corp as 50 µm thick extruded tapes. The LCPs, denoted B‐N, COTBP and RD1000, have B and N as common comonomers and vary the other comonomers. Thus, this study also enables the investigation of the influence of monomer composition on microstructure and mechanical properties. Heat treatments were carried out at temperatures close to the solid‐to‐nematic transition (T_s→n) for periods up to 5 h, under dry air conditions. The thermal treatment produced either two endotherms or a small increase of T_s→n (B‐N and RD1000), or increased significantly T_s→n (COTBP). Moreover, when heat treatment was carried out approximately 40°C below the respective T_s→n, the mechanical Young's modulus, E, along the extrusion axis, increased for all LCPs. Strikingly, for COTBP, E increased over 100% relative to the as‐extruded film. The results also showed that the optimum treatment time for improving the Young modulus, under dry air atmosphere, was between 3 and 4 h. Wide‐angle X‐ray scattering showed a significant sharpening of crystalline reflections and concentration of the 002 meridional reflection as a result of thermal treatment, suggesting the elimination of defects and a better alignment of the molecular chains along the extrusion axis. This would explain the increase in tensile modulus. Copyright © 2013 John Wiley & Sons, Ltd.     

Bipolar Mass Spectrometry of Labile Coordination Complexes, Redox Active Inorganic Compounds, and Proteins Using a Glass Nebulizer for Sonic-Spray Ionization

In this study, we report on the development of a novel nebulizer configuration for sonic-spray ionization (SSI) mass spectrometry (MS), more specifically for a version of SSI that is referred to as Venturi easy ambient sonic-spray ionization (V-EASI) MS. The developed nebulizer configuration is based on a commercially available pneumatic glass nebulizer that has been used extensively for aerosol formation in atomic spectrometry. In the present study, the nebulizer was modified in order to achieve efficient V-EASI-MS operation. Upon evaluating this system, it has been demonstrated that V-EASI-MS offers some distinct advantages for the analysis of coordination compounds and redox active inorganic compounds over the predominantly used electrospray ionization (ESI) technique. Such advantages, for this type of compounds, are demonstrated here for the first time. More specifically, a series of labile heptanuclear heterometallic [Cu^II ₆Ln^III] clusters held together with artificial amino acid ligands, in addition to easily oxidized inorganic oxyanions of selenium and arsenic, were analyzed. The observed advantages pertain to V-EASI appearing to be a “milder” ionization source than ESI, not requiring electrical potentials for gas phase ion formation, thus eliminating the possibility of unwanted redox transformations, allowing for the “simultaneous” detection of negative and positive ions (bipolar analysis) without the need to change source ionization conditions, and also not requiring the use of syringes and delivery pumps. Because of such features, especially because of the absence of ionization potentials, EASI can be operated with minimal requirements for source parameter optimization. We observed that source temperature and accelerating voltage do not seem to affect labile compounds to the extent they do in ESI-MS. In addition, bipolar analysis of proteins was demonstrated here by acquiring both positive and negative ion mass spectra from the same protein solutions, without the need to independently adjust solution and source conditions in each mode. Finally, the simple and efficient operation of a dual-nebulizer configuration was demonstrated for V-EASI-MS for the first time.

Crosslinked Networks Based on Polysaccharides and Collagen for Pilocarpine Sustained Release

The paper presents the experimental studies regarding synthesis and characterization of hydrogels based on gellan (Gel)/chitosan (CS) and collagen (Col), obtained by crosslinking with glutaraldehyde (GLA). The influence of the polysaccharide content and GLA ratio on the final composition and swelling characteristics was evaluated. Hydrogels swelling analysis, in distilled water and phosphate buffer (PBS, pH 7.2) has shown higher swelling degrees at increased concentration of polysaccharide into hydrogels. In vitro release of pilocarpine has demonstrated the possibility to use gellan-collagen and chitosan-collagen hydrogels as ophthalmic drug delivery matrix.     

Compatibility study of the acetylsalicylic acid with different solid dosage forms excipients

This study is part of a research project aimed to find and optimize methods by which drug-excipient compatibility can be reliably and quickly assessed. The objective of the present study was to evaluate the compatibility of the acetylsalicylic acid (ASA), an non-steroidal anti-inflammatory drug, with pharmaceutical excipients of common use including diluents, binders, disintegrants, lubricants and solubilising agents. In order to investigate the possible interactions between ASA and eleven excipients differential scanning calorimetry (DSC) and thermogravimetry/derivative thermogravimetry analysis completed by Fourier transform infrared spectroscopy (FT-IR) and X-ray powder diffraction were used for compatibility study. The DSC has proven to be, among the selected analytical techniques, the most sensitive and specific in assessing the compatibility. The samples, as physical mixtures, were prepared by mixing the analyte and excipients in a proportion of 1:1 (w:w). On the basis of thermal results (especially DSC), confirmed by FT-IR and X-ray analysis, a possible chemical interaction was found between the ASA with polyvinylpyrrolidone K30 (PVP) and magnesium stearate, respectively a possible physical interaction with colloidal silicon dioxide and stearic acid (Ac. St.).     

Thermal analysis of corrosion products formed on carbon steel in ammonium chloride solution

The influence of different ions NO₃ ^? and SO₄ ^2? on the carbon steel corrosion in ammonium chloride was investigated using mass loss measurements and potentiodynamic polarization. Corrosion products were analyzed using X-ray photoelectron spectroscopy (XPS) and simultaneous thermal and differential scanning calorimetry (TG/DSC). XPS analysis shows that the main product of corrosion is a non-stoichiometric Fe³⁺ oxyhydroxide, consisting of a mixture of FeO(OH) and FeO(OH) containing inclusions of these anions, species such as Fe³⁺O(OH,Cl^?); Fe³⁺O(OH,SO₄ ^2?); and Fe³⁺O(OH,NO₃ ^?). TG/DSC confirms the decomposition of the rusty products formed by chemical corrosion, compounds like Fe³⁺ oxyhydroxides, with β-FeOOH as the major phase, crystal structure of which may contain Cl^?, NO₃ ^?, and SO₄ ^2?—e.g., akaganeite [Fe³⁺O(OH,A)].     

Tris[2‐(1,3‐thiazol‐2‐yl‐κN)‐1H‐benzimidazole‐κN3]zinc(II) dinitrate ethanol hemisolvate monohydrate at 100 K

The Zn^II center in the dicationic complex of the title compound, [Zn(C₁₀H₇N₃S)₃](NO₃)₂·0.5C₂H₅OH·H₂O, is in a distorted octahedral environment with imperfect noncrystallographic C₃ symmetry. Each 2‐(1,3‐thiazol‐2‐yl)‐1H‐benzimidazole ligand coordinates in a bidentate manner, with the Zn—N(imidazole) bond lengths approximately 0.14 Å shorter than the Zn—N(thiazole) bond lengths. Charge‐assisted hydrogen bonds connect cations, anions and water molecules. A lattice void is occupied by an ethanol solvent molecule disordered about a crystallographic inversion center and π‐stacking is observed between one type of symmetry‐related benzene rings.     

Selective detection of unknown organic bromine compounds and quantification potentiality by negative-ion electrospray ionization mass spectrometry with induced in-source fragmentation

For the detection of unknown organic bromine compounds, a liquid chromatography–mass spectrometry (LC-MS) method with negative-ion electrospray ionization (NI-ESI) and induced in-source fragmentation (IISF) was established. After LC separation, the molecules are fragmentized in the source, and bromide is detected via m/z 79 and m/z 81 based on the isotopic occurrence of bromine. In this way, the retention times of the unknown organobromine compounds are determined, and this can be used to extract additional structural information (number of bound bromine atoms, molecular mass and fragmentation scheme) from measurements in the commonly used but less sensitive scan mode. The analysis of known organobromine compounds shows that LC/NI-ESI-IISF mass spectrometry with detection of m/z 79 and 81 is more sensitive than the detection of daughter ions (LC/ESI/MS-MS). Therefore, we present a method not only for the detection of unknown organic bromine compounds, but also for the selective and sensitive detection and quantification of known organobromine compounds.     

Monitoring of di-(2-ethylhexyl)phthalate,nonylphenol, nonylphenol ethoxylates,and polychlorinated biphenyls in anaerobic and aerobic sewage sludge by gas chromatography–mass spectrometry

The occurrence of di-(2-ethyhexyl)phthalate (DEHP), nonylphenol and nonyphenol mono- and diethoxylates (NPEs) and seven polychlorinated biphenyl (PCB) congeners in different types of sludge samples is reported. The analysis of these compounds was carried out by sonication-assisted extraction and analytical determination by gas chromatography coupled with a mass spectrometry detector, following a previously described method. The applicability of the method was tested by monitoring the organic pollutants in primary, secondary, mixed, and digested-dehydrated sludge samples from two wastewater treatment plants (WWTPs) based on aerobic and on anaerobic biological stabilization. The occurrence of these compounds in sewage sludge and the influence of sludge stabilization process on the further farmland application of the sludge were evaluated. DEHP and NPEs were detected in all analysed sludge samples from both WWTPs at concentration levels in the range of 22.3–601?mg?kg^?1 and 136–2357?mg?kg^?1 dm (dry matter), respectively. PCBs were detected in all types of sludge analysed from the anaerobic WWTP but was not detected in any sludge sample from the aerobic WWTP. Concentration levels of the sum of the seven PCBs congeners were up to 1.5?mg?kg^?1 dm. The concentration of DEHP, sum of NPEs, and sum of the seven PCB congeners were higher than the limits fixed in the third draft of the future Sludge Directive for land application of sludge in the 67%, 100%, and 11% of samples from the anaerobic WWTP and in the 83%, 92%, and 0% of samples from the aerobic WWTP, respectively.     

Supramolecular Polymerization of C3‐Symmetric Organogelators: Cooperativity,Solvent, and Gelation Relationship

A systematic study of the influence of solvent and the size of C₃‐symmetric discotics on their supramolecular polymerization mechanism is presented. The cooperativity of the self‐assembly of the reported compounds is directly related to their gelation ability. The two series of C₃‐symmetric discotics investigated herein are based on benzene‐1,3,5‐tricarboxamides (BTAs) and oligo(phenylene ethynylene)‐based tricarboxamides (OPE? TAs) that are peripherally decorated with achiral ( 1 a and 2 a ) or chiral N‐(2‐aminoethyl)‐3,4,5‐trialkoxybenzamide units ( 1 b and 2 b ). The supramolecular polymerization of compounds 1 a , b and 2 a , b has been exhaustively investigated in a number of solvents and by using various techniques: variable‐temperature circular dichroism (VT‐CD) spectroscopy, concentration‐dependent ¹H NMR spectroscopy, and isothermal titration calorimetry (ITC). The supramolecular polymerization mechanism of compounds 2 is highly cooperative in solvents such as methylcyclohexane and toluene and is isodesmic in CHCl₃. Unexpectedly, chiral compound 1 b is practically CD‐silent, in contrast with previously reported BTAs. ITC measurements in CHCl₃ demonstrated that the supramolecular polymerization of BTA 1 a is isodesmic. These results confirm the strong influence of the π‐surface of the central aromatic core of the studied discotic and the branched nature of the peripheral side chains on the supramolecular polymerization. The gelation ability of these organogelators is negated in CHCl₃, in which the supramolecular polymerization mechanism is isodesmic.     

Homogeneous Catalytic Hydrogenation of Amides to Amines

Hydrogenation of amides in the presence of [Ru(acac)₃] (acacH=2,4‐pentanedione), triphos [1,1,1‐tris‐ (diphenylphosphinomethyl)ethane] and methanesulfonic acid (MSA) produces secondary and tertiary amines with selectivities as high as 93 % provided that there is at least one aromatic ring on N. The system is also active for the synthesis of primary amines. In an attempt to probe the role of MSA and the mechanism of the reaction, a range of methanesulfonato complexes has been prepared from [Ru(acac)₃], triphos and MSA, or from reactions of [RuX(OAc)(triphos)] (X=H or OAc) or [RuH₂(CO)(triphos)] with MSA. Crystallographically characterised complexes include: [Ru(OAc‐κ¹O)₂(H₂O)(triphos)], [Ru(OAc‐κ²O,O′)(CH₃SO₃‐κ¹O)(triphos)], [Ru(CH₃SO₃‐κ¹O)₂(H₂O)(triphos)] and [Ru₂(μ‐CH₃SO₃)₃(triphos)₂][CH₃SO₃], whereas other complexes, such as [Ru(OAc‐κ¹O)(OAc‐κ²O,O′)(triphos)], [Ru(CH₃SO₃‐κ¹O)(CH₃SO₃‐κ²O,O′)(triphos)], H[Ru(CH₃SO₃‐κ¹O)₃(triphos)], [RuH(CH₃SO₃‐κ¹O)(CO)(triphos)] and [RuH(CH₃SO₃‐κ²O,O′)(triphos)] have been characterised spectroscopically. The interactions between these various complexes and their relevance to the catalytic reactions are discussed.