Simultaneous effects of induced magnetic field and heat and mass transfer on the peristaltic motion of second‐order fluid in a channel

In this article, we investigate the influence of heat and mass transfer on the peristaltic flow of magnetohydrodynamic second‐order fluid in a channel when the induced magnetic field effects are present. Problem formulation in a wave frame of reference is presented. The governing nonlinear analysis is carried out under the assumption of small wave number. Explicit expressions of the pressure gradient, the stream function, the magnetic force function, the axial induced magnetic field, the current density distribution, the temperature, and the concentration distribution are derived. The effects of embedded parameters are also examined. Copyright © 2011 John Wiley & Sons, Ltd.     

Hydrophobic cryogels for DNA adsorption: Effect of embedding of monosize microbeads into cryogel network on their adsorptive performances

As alternative hydrophobic adsorbent for DNA adsorption, supermacroporous cryogel disks were synthesized via free radical polymerization. In this study, we have prepared two kinds of cryogel disks: (i) poly(2‐hydroxyethyl methacrylate‐N‐methacryloyl‐l ‐tryptophan) [p(HEMA‐MATrp)] cryogel containing specific hydrophobic ligand MATrp; and (ii) monosize p(HEMA‐MATrp) particles synthesized via suspension polymerization embedded into p(HEMA) cryogel structure to obtain p(HEMA‐MATrp)/p(HEMA) composite cryogel disks. These cryogel disks containing hydrophobic functional group were characterized via swelling studies, Fourier transform infrared spectroscopy, elemental analysis, surface area measurements and scanning electron microscopy. DNA adsorption onto both p(HEMA‐MATrp) cryogel and p(HEMA‐MATrp)/p(HEMA) composite cryogels was investigated. Maximum adsorption of DNA on p(HEMA‐MATrp) cryogel was found to be 15 mg/g polymer. Otherwise, p(HEMA‐MATrp)/p(HEMA) composite cryogels significantly increased the DNA adsorption capacity to 38 mg/g polymer. Composite cryogels could be used repeatedly without significant loss on adsorption capacity after 10 repetitive adsorption–desorption cycles. Copyright © 2013 John Wiley & Sons, Ltd.     

Cobalt titanate–cobalt oxide composite thin films deposited from heterobimetallic precursor

A single molecular heterobimetallic complex, [Co₂Ti(μ₃‐O)(TFA)₆(THF)₃] (1) [TFA = trifluoroacetate, THF = tetrahydrofuran], was synthesized, structurally and spectroscopically characterized and implemented as a single‐source precursor for the preparation of CoTiO₃–CoO composite thin films by aerosol‐assisted chemical vapour deposition (AACVD). The precursor complex was prepared by interaction of Co(OAc)₂.4H₂O [OAc = (CH₃COO^?)] with Ti(iso‐propoxide)₄ in the presence of trifluoroacetic acid in THF, and was analysed by melting point, CHN, FT‐IR, single‐crystal X‐ray diffraction and thermogravimetric analysis. The precursor complex thermally decomposed at 480 °C to give a residual mass corresponding to a CoTiO₃–CoO composite material. Good‐quality crystalline CoTiO₃–CoO composite thin films deposited at 500 °C by AACVD and characterized through powder X‐ray diffraction and scanning electron microscopy/energy‐dispersive X‐ray spectroscopy show that the crystallites have a rose‐flower‐like morphology with an average petal size in the range of 2–6 µm. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis,anti‐migration and burning rate catalytic mechanism of ferrocene‐based compounds

One of the most important components of solid rocket propellant is the burning rate catalysts (BRC) which enhance burning rate of solid composite propellant. Low‐pressure exponents and stable burning rate are the key features of an excellent solid propellant. Addition of BRC to the propellant results in the increase of burning rate of the propellant and decrease in pressure exponents. Among all BRC, ferrocene‐based BRC have attracted much attention because of their better microscopic homogeneities in distribution, ignitability of the propellants and good compatibility with organic binder. However, the main barrier for the development and practical applications of ferrocene‐based BRC is their migration property. This article reviews the field and highlights recent progress. Copyright © 2014 John Wiley & Sons, Ltd.     

Combined protein A imprinting and cryogelation for production of spherical affinity material

Cryogels have been demonstrated to be efficient when applied for protein isolation. Owing to their macroporous structure, cryogels can also be used for treating particle‐containing material, e.g. cell homogenates. Another challenging development in protein purification technology is the use of molecularly imprinted polymers (MIPs). These MIPs are robust and can be used repeatedly. The paper presents a new technology that combine the formation of cryogel beads concomitantly with making imprints of a protein. Protein A was chosen as the print molecule which was also be the target in the purification step. The present paper describes a new method to produce protein‐imprinted cryogel beads. The protein‐imprinted material was characterized and the separation properties were evaluated with regard to both the target protein and whole cells with target protein exposed on the cell surface. The maximum protein A adsorption was 18.1 mg/g of wet cryogel beads. The selectivity coefficient of protein A‐imprinted cryogel beads for protein A was 5.44 and 12.56 times greater than for the Fc fragment of IgG and protein G, respectively.     

L’Hospital rule for matrix functions

In this paper, the L’Hospital rule for evaluating limits of complex matrix functions is introduced. We present some specific examples on certain matrix functions showing the applicability of our approach.     

Coumarin-based D–π–A dyes for efficient DSSCs: DFT and TD-DFT study of the π-spacers influence on photovoltaic properties

Research on Chemical Intermediates - A series of D–π–A architectures dyes with Coumarin-based derivatives as difluorenylaminocoumarin (DF) and diphenylaminocoumarin (DP) have been...     

A thermostated coupled apparatus for the simultaneous determination of adsorption isotherms and differential enthalpies of adsorption at high pressure and high temperature

In order to assess and improve the quality of high pressure and temperature adsorption isotherms and differential enthalpies of adsorption on microporous and mesoporous materials, a specific thermostated device comprising a differential heat flow calorimeter coupled with a home-built manometric system has been built. The differential heat flow calorimeter is a Tian Calvet Setaram C80 model which can be operated isothermally, the manometric system is a stainless steel homemade apparatus. The thermostated coupled apparatus allows measurements for pressure up to 2.5?MPa and temperature from 303 to 423?K. Reliability and reproducibility were established by measuring adsorption isotherms on a benchmark sorbent (Filtrasorb F400). A detailed experimental study of the adsorption of pure carbon dioxide and methane has been made on activated carbons (Filtrasorb F400 and EcoSorb); a new procedure for determining the differential enthalpies of adsorption based on the stepwise method is also proposed. The error in the determination of the amount adsorbed is about 3.6%, and the error in the determination of the differential enthalpies of adsorption is 4%.     

Ionic liquid behavior and high thermal stability of silver chloride nanoparticles: Synthesis and characterization

Silver chloride was found to be stable even after calcination at 650 °C for 10 h. SEM studies revealed the morphology of silver chloride as hexagonal particles. TEM studies show the size of silver chloride particles to have an average size of 6–7 nm. Thermal studies suggest that silver chloride nanoparticles behave like ionic liquid or molten salt in the range of 455–650 °C.