Bucillamine Inhibits UVB-Induced MAPK Activation and Apoptosis in Human HaCaT Keratinocytes and SKH-1 Hairless Mouse Skin

Ultraviolet B (UVB) radiation is known as a culprit in skin carcinogenesis. We have previously reported that bucillamine (N-[2-mercapto-2-methylpropionyl]-L-cysteine), a cysteine derivative with antioxidant and anti-inflammatory capacity, protects against UVB-induced p53 activation and inflammatory responses in mouse skin. Since MAPK signaling pathways regulate p53 expression and activation, here we determined bucillamine effect on UVB-mediated MAPK activation in vitro using human skin keratinocyte cell line HaCaT and in vivo using SKH-1 hairless mouse skin. A single low dose of UVB (30 mJ cm⁻²) resulted in increased JNK/MAPK phosphorylation and caspase-3 cleavage in HaCaT cells. However, JNK activation and casaspe-3 cleavage were inhibited by pretreatment of HaCaT cells with physiological doses of bucillamine (25 and 100 µm ). Consistent with these results, bucillamine pretreatment in mice (20 mg kg⁻¹) inhibited JNK/MAPK and ERK/MAPK activation in skin epidermal cells at 6–12 and 24 h, respectively, after UVB exposure. Moreover, bucillamine attenuated UVB-induced Ki-67-positive cells and cleaved caspase-3-positive cells in mouse skin. These findings demonstrate that bucillamine inhibits UVB-induced MAPK signaling, cell proliferation and apoptosis. Together with our previous report, we provide evidence that bucillamine has a photoprotective effect against UV exposure.     

Melidianolic acid A and B, new antimalarial acyclic diterpenes from Aphanamixis grandifolia

Two new acyclic diterpenes, melidianolic acids A (1) and B (2), have been isolated from the bark of Aphanamixis grandifolia. Their structures were elucidated on the basis of spectroscopic and chemical methods. Melidianolic acids A (1) and B (2) showed antimalarial activity against Plasmodium falciparum 3D7 with IC50 of 6.1 and 7.3 microg/mL, respectively.     

Interaction energy‐based drug–receptor interaction study of metal–bicyclam complexes

Bicyclams inhibit HIV replication by binding to the CXCR4 chemokine receptor, which is the main coreceptor for gp120 used by X4, T‐tropic strains of HIV for membrane fusion and cell entry. Bicyclam AMD3100 mainly interacts with the aspartic acid residues namely Asp171 and Asp262, which are located at the extracellular ends in the CXCR4 coreceptor. Incorporation of some metal ions by the macrocyclic rings of bicyclam enhances its binding affinity to the CXCR4 receptor and enhances their anti‐HIV activity because the acetate can make a strong coordination bond to the metal and one weaker hydrogen bond to nitrogen in the cyclam ring. The interaction energy (E_int) between 150 metal–bicyclam complexes and aspartic acid has been evaluated. The metal–bicyclam complexes are obtained by the incorporation of six metal ions namely Fe³⁺, Co³⁺, Ni²⁺, Cu²⁺, Zn²⁺, and Pd²⁺ in 25 well‐known bicyclams including AMD3100. In most of the cases, Fe and Co–bicyclam complexes interact best with aspartic acid. The anti‐HIV activity of metal–bicyclam complexes can be predicted on the basis of interaction energy before the synthesis of the metal–bicyclam complex. On the basis of interaction energy, the anti‐HIV activity of bicyclam complexes can be predicted in advance to their synthesis. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Ionic liquid behavior and high thermal stability of silver chloride nanoparticles: Synthesis and characterization

Silver chloride was found to be stable even after calcination at 650 °C for 10 h. SEM studies revealed the morphology of silver chloride as hexagonal particles. TEM studies show the size of silver chloride particles to have an average size of 6–7 nm. Thermal studies suggest that silver chloride nanoparticles behave like ionic liquid or molten salt in the range of 455–650 °C.     

Stress in aerogel during depressurization of autoclave: II. Silica gels

Although supercritical drying avoids the capillary stresses that tend to warp and crack xerogels, there are other sources of stress that interfere with the preparation of monolithic aerogels. In this paper, we present experimental results showing that there is a limit to the rate at which the pressure can be released from the autoclave without causing cracking, and that the maximum rate decreases as the gel size increases. Using an analysis developed in a companion paper, the stresses generated during depressurization are compared to the modulus of rupture of our aerogels. The calculations require knowledge of the pressure-dependence of the density of the vapor (ethanol, in our experiments), as well as the permeability and modulus of the gel network. Measurements of those properties were performed on a series of silica gels made under basic and neutral conditions. We find that the calculated stresses are large enough to account for the cracking of our gels at high rates of depressurization; moreover, the predicted dependence of stress on gel diameter is in agreement with experiment.     

Ultrasonic-assisted leaching of trace metals from sediments as a function of pH

The effects of ultrasonication on the leaching of trace metals form sediments as a function of pH have been investigated using atomic absorption spectrometry. Cu, Pb, Ni, Zn and Mn were leached from sediments by ultrasonic effect using phthalate buffers at pH values of 2.2-6.0. Parameters influencing leaching, such as leaching time, solution matrix, wet or dry sample and final pH were evaluated. Results from ultrasonic leaching experiments were comparable to those of conventional procedure. In addition, this ultrasonic-assisted leaching method reduces the time required for conventional method approximately from 12 h to 25 min. Depending on the metal and sample type, metal removal increased linearly or exponentially with decreasing pH. The accuracy of the method was tested by comparing obtained results with this of conventional method. The average relative standard deviation (R.S.D.) of ultrasonic-assisted leaching method (ULM) varied between 1.71 and 3.00% for N = 36, depending on the analyte. This technique shows promise for studying chemical and biological availability and uptake/release processes for metals in sediment and soil as a function of pH.     

Reaction of Cα,O-dilithiooximes with functionalized carbonyl compounds. Part 2 . Reaction with α-chloroketones and α,β-unsaturated aldehydes and ketones

The reaction of Cα,O-Dilithiooximes 2 and α-chloroketones afforded 5-(hydroxymethyl)-Δ²-soxazolines 4 . α,β-Unsaturated aldehydes and ketones reacted with 2 to give the corresponding acyclic 1,2-addition products 5 . The latter were cyclized with phosphorus pentoxide to 5-vinyl-Δ²-isoxazolines 6 .     

Photochemistry of desonide, a non-fluorinated steroidal anti-inflammatory drug

The photochemistry of anti-inflammatory drug desonide (De, 1) was studied in aerobic as well as in anaerobic condition with different irradiation wavelengths (254, 310 nm) in acetonitrile and 2-propanol. All photoproducts obtained were isolated and characterized on the basis of IR, (1)H-, (13)C-NMR spectroscopy and elemental analysis study. The products were: 11beta,21-dihydroxy-16alpha,17alpha-(1-methylethylidenedioxy)-1,5-cyclopregn-3-ene-2,20-dione 2 (254 nm), 11beta-hydroxy-16alpha,17alpha-(1-methylethylidenedioxy)androsta-1,4-diene-3-one 3 (310 nm/2-propanol), 17beta-hydroperoxy-11beta-hydroxy-16alpha,17alpha-(1-methylethylidenedioxy)androsta-1,4-diene-3-one 4 (310 nm/O(2)/2-propanol). Cyclohexadienone moiety in ring A and keto group at C(17) were found to be deeply modified by UV light therefore, loss of biological activity both during storage and in vivo can not be ruled out.     

Intelligence Way from Eco-friendly Synthesis Strategy of New Heterocyclic Pyrazolic Carboxylic α-Amino Esters

The α-amino acid derivatives constitute a class of compounds of particular medicinal and synthetic attention and considerable interest has been devoted to their synthesis in recent years. In the present work, we develop the computational study of the synthesis reaction of new pyrazolyl α-amino esters derivatives using the Gaussian 09 based on the DFT/B3LYP density functional theory method, with the base 6-31G(d, p) to ensure the possibility of carrying out these reactions within the laboratory of synthesis. Indeed, this research has encouraged us to establish an economical synthesis strategy of these products in overall yields of 73.5% to 87% to have access to new active biomolecule through the O-alkylation reaction between methyl α-azidoglycinate N-benzoylated and primary pyrazole alcohols[(3,5-dimethyl-1H-pyrazol-1-yl)methanol, (1H-pyrazol-1-yl)methanol and (3-ethoxy-5-methyl-1H-pyrazol-1-yl)methanol] under different operating conditions. The structure of the prepared heterocyclic systems was characterized by conventional spectroscopic techniques, like ¹H NMR, ¹³C NMR, and MS. The results revealed that the experimental study is in good correlation with the computational one.     

Probing Cell-Surface Interactions in Fungal Cell Walls by High-Resolution 1H-Detected Solid-State NMR Spectroscopy

Solid-state NMR (ssNMR) spectroscopy facilitates the non-destructive characterization of structurally heterogeneous biomolecules in their native setting, for example, comprising proteins, lipids and polysaccharides. Here we demonstrate the utility of high and ultra-high field ¹H-detected fast MAS ssNMR spectroscopy, which exhibits increased sensitivity and spectral resolution, to further elucidate the atomic-level composition and structural arrangement of the cell wall of Schizophyllum commune, a mushroom-forming fungus from the Basidiomycota phylum. These advancements allowed us to reveal that Cu(II) ions and the antifungal peptide Cathelicidin-2 mainly bind to cell wall proteins at low concentrations while glucans are targeted at high metal ion concentrations. In addition, our data suggest the presence of polysaccharides containing N-acetyl galactosamine (GalNAc) and proteins, including the hydrophobin proteins SC3, shedding more light on the molecular make-up of cells wall as well as the positioning of the polypeptide layer. Obtaining such information may be of critical relevance for future research into fungi in material science and biomedical contexts.