One-pot five-component synthesis of highly functionalized piperidines using oxalic acid dihydrate as a homogenous catalyst

An efficient green protocol is described for the preparation of highly functionalized piperidines via a one-pot five-component reaction between aromatic aldehydes,anilines andβ-ketoesters in the presence of oxalic acid dihydrate as catalyst in ethanol at ambient temperature.The structure as well as the relative stereochemistry of these compounds was confirmed by single X-ray crystallographic analysis.     

Catalytic behaviors of Co-Mn/TiO2 catalysts for Fischer-Tropsch synthesis

The 15%(Co-Mn)/TiO₂,(Co/Mn=1/6) catalyst was prepared using fusion procedure and studied for the conversion of synthesis gas to C_2~4 olefins. The effects of calcination conditions and operation conditions such as the H₂/CO molar feed ratio at different temperatures, gas hourly space velocity (GHSV) and total reaction pressure on the catalytic performance of catalyst were investigated. The stability of the catalyst during 150 h at optimal operation conditions (t=250 ℃ H₂/CO=2/1, GHSV=1 500 h^-1 and p=0.3 MPa) has been investigated. It is found that this catalyst is high stable for production C_2~4 olefins. Characterizations of both precursors and calcined catalysts by powder X-ray diffraction, scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) specific surface area measurement and thermal analysis methods such as thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC) show that the different preparation method influences the catalyst precursor structure and morphology.     

Two-dimensional supramolecular assembly of phenylmercury(II) and cadmium(II) complexes with a tridentate thiohydrazone NNS donor ligand: Synthesis,coordination behavior and crystal structure

The reaction of phenylmercury(II) acetate and cadmium(II) acetate with a refluxed solution of diacetylmonoxime and morpholine N-thiohydrazide formed a novel phenylmercury(II) complex, [PhHg(Hdammthiol)] (1) and a cadmium(II) complex, [Cd(Hdammthiol)₂] (2), respectively (where H₂dammthiol is the thiol form of diacetylmonoximemorpholine N-thiohydrazone (Hdammth) formed by the condensation of diacetylmonoxime and morpholine N-thiohydrazide in the presence of phenylmercury(II) and cadmium(II) ions). The complexes were characterised by elemental analyses and spectral data (electronic, infrared and ¹H NMR) and also by X-ray crystal structure analysis. The X-ray crystallography shows that the phenylmercury(II) complex attained a tricoordinated distorted T-shaped structure, while the cadmium(II) complex attained a trapezoidal bipyramidal geometry. The phenylmercury(II) complex forms a two-dimensional sheet via C–H?O and O–H?N hydrogen bonding and also forms a two-dimensional supramolecular dimer, having C–H?π synthons. Intermolecular C–H?O and O–H?O hydrogen bonding of the cadmium(II) complex forms a two-dimensional supramolecular sheet along the bc plane and posses an impressively short intermolecular C(sp³)?O(sp³) contact.     

Studies and X‐ray Determinations with 2‐(Acetonylthio)benzothiazole: Synthesis of 2‐(Benzothiazol‐2‐ylthio)‐1‐phenylethanone and 2‐(Acetonylthio)Benzothiazole by C―S Bond Cleavage of 2‐(Acetonylthio)benzothiazole in KOH

New route for the synthesis of 2‐(benzothiazol‐2‐ylthio)‐1‐phenylethanone ( 6 ) and 2‐(acetonylthio)benzothiazole ( 1 ) by using phenacyl bromide and α‐chloroacetone, respectively, through carbon–sulfur bond cleavage reactions in a basic medium has been generated. Treatment of 1 with malononitrile and elemental sulfur afforded the corresponding derivative of 2‐amino‐3‐cyanothiophene ( 12 ), whereas treatment of 1 with cyanoacetohydrazide afforded the corresponding derivative of cyanoacetylhydrazone derivative ( 13 ). The structure of the synthesis compounds has been established on the basis of elemental analyses, ¹H‐NMR, ¹³C‐NMR, correlation spectroscopy, heteronuclear single quantum coherence, MS spectra, and X‐ray crystallographic investigations.     

Novel modified carbon nanotubes as a selective sorbent for preconcentration and determination of trace copper ions in fruit samples

In this work, multiwalled carbon nanotubes were reacted with N‐[3‐(triet‐hoxysilyl)propyl]isonicotinamide to prepare pyridine‐functionalized carbon nanotubes. This novel sorbent was characterized by infrared spectroscopy, thermal and elemental analysis, and scanning electron microscopy. Functionalized carbon nanotubes were applied for the preconcentration and determination of copper ions using flame atomic absorption spectrometry. Various parameters such as sample pH, flow rate, eluent type and concentration, and its volume were optimized. Under optimal experimental conditions, the limit of detection, the relative standard deviation, and the recovery of the method were 0.65 ng/mL, 3.2% and 99.4%, respectively. After validating the method using standard reference materials, the new sorbent was applied for the extraction and determination of trace copper(II) ions in fruit samples.     

A robust-adaptive fuzzy coverage control for robotic swarms

In this paper, a decentralized adaptive control scheme for multi-robot coverage is proposed. This control method is designed based on centroidal Voronoi configuration integrated with robust adaptive fuzzy control techniques. We consider simple single integrator mobile robots used for covering dynamical environments, where an adaptive fuzzy logic system is used to approximate the unknown parts of control law. A robust coverage criterion is used to attenuate the adaptive fuzzy approximation error and measurement noises to a prescribed level. Therefore, the robots motion is forced to obey solutions of a coverage optimization problem. The advantages of the proposed controller can be listed as robustness to external disturbances, computation uncertainties, and measurement noises, while applicability on dynamical environments. A Lyapunov-function based proof is given of robust stability, i.e. convergence to the optimal positions with bounded error. Finally, simulation results are demonstrated for a swarm coverage problem simultaneous with tracking mobile intruders.     

HETEROCYCLIZATION OF AMINOTHIAZOLES

Several new 2-arylidinoamino-4-(3-coumaryl)thiazole derivatives were synthesized via the reaction of 2-amino-4-(coumaryl)thiazole with aromatic aldehydes and other reagents. Structural elucidations were based on elementary analysis and spectral data studies.     

Investigation of the Electroreduction Behavior,Electroreduction Mechanism and Voltammetric Determination of Medetomidine on the Graphene Paste Electrode

This paper presents a method for the construction of a graphene paste electrode (GPE) from reduced graphene oxide (RGO). The GPE was successfully used for the determination of medetomidine. The influence of some experimental variables such as pH, supporting electrolyte, scan rate, and possible interferences were studied. Differential pulse voltammetric (DPV) peak currents of medetomidine increased linearly with its concentration in the range from 0.009 to 2.5 µM. The limit of detection (LOD) and limit of quantitation (LOQ) values for the determination of medetomidine were 2.8 and 9.2 nM, respectively. Also, for the first time, the electroreduction behavior of medetomidine was investigated.     

A Simple Synthesis of Stable Phosphoranes Derived from Imidazole Derivatives

Stable crystalline phosphorus ylides were obtained in excellent yields from the 1:1:1 addition reaction between triphenylphosphine and dialkyl acetylenedicarboxylates, in the presence of strong NH-acids, such as imidazole, 2-methylimidazole, 4-methylimidazole, 2-ethylimidazole, benzimidazole, and 5,6-dimethylbezimidazole. These stable ylides exist in solution as a mixture of two geometrical isomers as a result of restricted rotation around the carbon–carbon partial double bond resulting from the conjugation of the ylide moiety with the adjacent carbonyl group.     

A Simple Synthesis of Stable Phosphorus Ylides from Indole and Some of Its Derivatives

Stable crystalline phosphorus ylides were obtained in excellent yields from the 1:1:1 addition reaction between triphenylphosphine and dialkyl acetylenedicarboxylates in the presence of strong NH acids, such as indole and 2-methyl indole, 3-methyl indole, and 5-boromo indole. These stable ylides exist in a solution as a mixture of two geometrical isomers as a result of the restricted rotation around the carbon–carbon partial double bond resulting from the conjugation of the ylide moiety with the adjacent carbonyl group.